Pressure, flow, pipes, open channels, notches
Topics: Fluid properties; intensity of pressure, gauge and absolute pressure, piezometer and manometers; total pressure and centre of pressure; types of flow, continuity, Bernoulli’s theorem and its applications (venturi meter, orifice meter, pitot tube); orifices and mouthpieces; notches and weirs; flow through pipes (Darcy, losses); open channels (Chezy, Manning); pumps.
Pressure and hydrostatic force
Pressure at depth h is ρgh (gauge); absolute = gauge + atmospheric. The total force on a submerged plane is P = ρgAx̄, where x̄ is the depth of the centroid. It acts at the centre of pressure, deeper than the centroid: h* = x̄ + I_G/(Ax̄).
For a vertical rectangle with its top at the surface, the centre of pressure is at two-thirds of the depth.
- p = ρgh
- P = ρgAx̄
- h* = x̄ + I_G/(Ax̄)
Example: A vertical gate 2 m wide holds water 3 m deep with its top at the surface. Find the force and its depth.
- A = 6 m², x̄ = 1.5 m: P = 9810 × 6 × 1.5 ≈ 88.3 kN.
- Centre of pressure at 2/3 × 3 = 2 m depth.
Answer: 88.3 kN at 2 m
Bernoulli, orifices and flow meters
Bernoulli’s theorem applied to a tank gives Torricelli’s velocity v = √(2gH) through a sharp orifice. The real discharge is Q = C_d a √(2gH), with C_d = C_c × C_v ≈ 0.62 for a sharp-edged orifice (contraction is the main loss).
Venturi and orifice meters, pitot tubes and notches (rectangular Q = (2/3)C_d L √(2g) H^1.5; triangular Q = (8/15)C_d tan(θ/2) √(2g) H^2.5) measure flow.
- v = √(2gH)
- Q = C_d a √(2gH); C_d = C_c C_v
- Rectangular notch ∝ H^1.5; V-notch ∝ H^2.5
Example: Water stands 5 m above an orifice of area 0.001 m² with C_d = 0.62. Find v and Q.
- v = √(2 × 9.81 × 5) ≈ 9.90 m/s.
- Q = 0.62 × 0.001 × 9.90 ≈ 0.00614 m³/s (6.1 L/s).
Answer: 9.9 m/s; 6.1 L/s
Example: If the head over a V-notch doubles, by what factor does the flow rise?
- Q ∝ H^2.5.
- 2^2.5 ≈ 5.66 times.
Answer: ≈ 5.7 times
Flow in pipes and open channels
Head loss by friction: Darcy–Weisbach h_f = fLv²/(2gD) (f is the Darcy friction factor). Minor losses at entrances, bends and valves are K v²/2g.
Open channels: Manning’s formula v = (1/n) R^(2/3) S^(1/2), where R = A/P is the hydraulic radius. The most economical rectangular channel has width twice its depth.
- h_f = fLv²/(2gD)
- v = (1/n) R^(2/3) S^(1/2)
- Economical rectangle: b = 2d
Example: Find h_f in 1000 m of 0.3 m pipe with v = 2 m/s and f = 0.02.
- h_f = 0.02 × 1000 × 4/(2 × 9.81 × 0.3).
- ≈ 13.6 m.
Answer: ≈ 13.6 m
Example: A rectangular channel 2 m wide flows 1 m deep, n = 0.015, S = 0.001. Find v and Q.
- A = 2, P = 4, R = 0.5; v = (1/0.015) × 0.5^(2/3) × 0.0316 ≈ 1.33 m/s.
- Q = 2 × 1.33 ≈ 2.66 m³/s.
Answer: 1.33 m/s; 2.66 m³/s
Pressure at depth h is p = wh, so 1 atmosphere is about 10.3 m of water or 760 mm of mercury (specific gravity 13.6). Absolute pressure = atmospheric + gauge pressure. On an immersed plane surface the total pressure is wAx̄, acting at the centre of pressure below the centroid; for a vertical rectangle reaching the surface, it is at 2H/3. Bernoulli’s theorem conserves total head p/w + v²/2g + z along a streamline. The major loss in a pipe is h_f = fLV²/2gD. Open-channel flow is computed by Chezy’s V = C√(mi) or Manning’s V = (1/n)R^(2/3)S^(1/2), where the hydraulic mean depth m = A/P.
- Orifice: Cd = Cc × Cv ≈ 0.62.
- Rectangular notch Q = (2/3)Cd L√(2g) H^(3/2); triangular notch Q = (8/15)Cd tan(θ/2)√(2g) H^(5/2).
- Most economic rectangular channel: b = 2d, m = d/2.
- Venturi meter measures discharge; pitot tube measures velocity at a point.
- A siphon and minor losses (sudden enlargement (V₁ − V₂)²/2g, entry 0.5V²/2g) are common questions.
Key formulas
- p = wh
- P = wAx̄
- Q = A₁V₁ = A₂V₂
- h_f = fLV²/2gD
- V = C√(mi)
- V = (1/n)R^(2/3)S^(1/2)
Practice questions
Absolute pressure equals
- gauge − atmospheric
- gauge + atmospheric
- atmospheric − vacuum − gauge
- gauge only
Show the answer
Answer: B. gauge + atmospheric Standard relation.
Standard atmospheric pressure in metres of water is about
- 760
- 10.3
- 1
- 101
Show the answer
Answer: B. 10.3 10.33 m.
The centre of pressure on a vertical surface lies
- above the centroid
- at the centroid
- below the centroid
- at the free surface
Show the answer
Answer: C. below the centroid Pressure increases with depth.
Bernoulli’s theorem is based on conservation of
- mass
- energy
- momentum
- volume
Show the answer
Answer: B. energy Total head.
Hydraulic mean depth is
- A/P
- P/A
- A × P
- depth/2
Show the answer
Answer: A. A/P Area over wetted perimeter.
Most economic rectangular channel has
- b = d
- b = 2d
- b = d/2
- b = 3d
Show the answer
Answer: B. b = 2d Minimum wetted perimeter.
Discharge over a rectangular notch varies as
- H
- H^1.5
- H²
- H^2.5
Show the answer
Answer: B. H^1.5 V-notch varies as H^2.5.
Cd of an orifice is the product of
- Cc and Cv
- Cc and Cr
- Cv and Cr
- Cc only
Show the answer
Answer: A. Cc and Cv Contraction × velocity.
A venturi meter is used to measure
- pressure only
- discharge
- viscosity
- surface tension
Show the answer
Answer: B. discharge Pipe discharge.
Mercury is used in manometers mainly because of its
- colour
- high density
- low cost
- low viscosity
Show the answer
Answer: B. high density Short columns for large pressures.
A piezometer cannot measure
- small gauge pressure
- vacuum pressure
- water pressure
- pipe pressure
Show the answer
Answer: B. vacuum pressure Liquid would not rise in the tube.
In Manning’s formula, n is
- the roughness coefficient
- the number of bends
- Reynolds number
- slope
Show the answer
Answer: A. the roughness coefficient Depends on surface.
The practice questions were written for this studio; they are not copied from ASTU papers. ASTU publishes no topic syllabus for these exams, so the topics are an informed guide based on diploma courses, not an official list.