Co-ordinate geometry of two dimensions
Topics: Circle under different conditions; forms of parabola; standard ellipse and hyperbola.
The circle
A circle is the set of points at a fixed distance r from a centre (h, k). The distance formula immediately gives its equation. Expanding it gives the general form, x² + y² + 2gx + 2fy + c = 0. To recognise a circle, check that the x² and y² coefficients are equal and there is no xy term. Its centre is (−g, −f).
- Standard: (x − h)² + (y − k)² = r²
- General: centre (−g, −f), r = √(g² + f² − c)
- With (x₁, y₁) and (x₂, y₂) as a diameter: (x − x₁)(x − x₂) + (y − y₁)(y − y₂) = 0
Example: Find the centre and radius of x² + y² − 6x + 8y − 11 = 0.
- Compare with the general form: 2g = −6 and 2f = 8, so g = −3 and f = 4.
- c = −11.
- Centre = (−g, −f) = (3, −4).
- r = √(9 + 16 + 11) = √36.
Answer: Centre (3, −4), radius 6
Example: Find the circle with (1, 2) and (3, 4) as the ends of a diameter.
- (x − 1)(x − 3) + (y − 2)(y − 4) = 0.
- x² − 4x + 3 + y² − 6y + 8 = 0.
Answer: x² + y² − 4x − 6y + 11 = 0
Parabola, ellipse and hyperbola
All three are conics, defined by a focus, a directrix and an eccentricity e. A parabola, y² = 4ax, has e = 1 and is the shape of satellite dishes and bridge cables. An ellipse, x²/a² + y²/b² = 1 with a > b, has e < 1 and two foci. Here b² = a²(1 − e²). A hyperbola, x²/a² − y²/b² = 1, has e > 1, with b² = a²(e² − 1).
- Parabola y² = 4ax: focus (a, 0), directrix x = −a, latus rectum 4a.
- Ellipse: foci (±ae, 0), vertices (±a, 0).
- Hyperbola: foci (±ae, 0), vertices (±a, 0).
Example: Find the focus, directrix and latus rectum of y² = 8x.
- Compare with y² = 4ax: 4a = 8, so a = 2.
- Focus (a, 0) = (2, 0).
- Directrix x = −a = −2.
- Latus rectum = 4a = 8.
Answer: Focus (2, 0), directrix x = −2, latus rectum 8
Example: Find the eccentricity and foci of x²/25 + y²/9 = 1.
- a² = 25 and b² = 9, so a = 5.
- b² = a²(1 − e²): 9 = 25(1 − e²).
- 1 − e² = 9/25, so e² = 16/25 and e = 4/5.
- ae = 5 × 4/5 = 4.
Answer: e = 0.8, foci (±4, 0)
Example: Find the eccentricity of x²/16 − y²/9 = 1.
- a² = 16 and b² = 9.
- b² = a²(e² − 1): 9 = 16(e² − 1).
- e² = 25/16.
Answer: e = 5/4
A circle is the set of points at a fixed distance from a centre. Its equation comes from the distance formula. In general form its centre and radius are found by completing the square. A conic section is a curve cut from a cone: its eccentricity e is the ratio of the distance from the focus to the distance from the directrix, with e = 1 for a parabola, e < 1 for an ellipse and e > 1 for a hyperbola.
- Circle with centre (h, k): (x − h)² + (y − k)² = r².
- x² + y² + 2gx + 2fy + c = 0 has centre (−g, −f).
- Parabola y² = 4ax has focus (a, 0) and directrix x = −a.
- Ellipse x²/a² + y²/b² = 1; hyperbola x²/a² − y²/b² = 1.
Key formulas
- r = √(g² + f² − c)
- y² = 4ax
- x²/a² + y²/b² = 1
- x²/a² − y²/b² = 1
Practice questions
The centre of x² + y² = 25 is
- (5, 5)
- (0, 0)
- (25, 0)
- (1, 1)
Show the answer
Answer: B. (0, 0) No shift from the origin.
The radius of x² + y² = 25 is
- 25
- 5
- 10
- 12.5
Show the answer
Answer: B. 5 √25.
For a parabola, e equals
- 0
- 1
- 2
- 1/2
Show the answer
Answer: B. 1 Definition.
The eccentricity of an ellipse is
- less than 1
- equal to 1
- greater than 1
- zero always
Show the answer
Answer: A. less than 1 0 < e < 1.
The focus of y² = 8x is
- (2, 0)
- (8, 0)
- (0, 2)
- (4, 0)
Show the answer
Answer: A. (2, 0) 4a = 8, so a = 2.
The centre of x² + y² − 4x + 6y = 0 is
- (2, −3)
- (−2, 3)
- (4, −6)
- (0, 0)
Show the answer
Answer: A. (2, −3) Centre is (−g, −f).
Theory questions
Find the equation of the circle with centre (2, −1) and radius 3. (3 marks)
Show the model answer
(x − 2)² + (y + 1)² = 9, or x² + y² − 4x + 2y − 4 = 0.
Find the centre and radius of x² + y² − 6x + 8y − 11 = 0. (5 marks)
Show the model answer
g = −3, f = 4, c = −11. Centre (3, −4). r = √(9 + 16 + 11) = 6.
Define a conic section and write the standard equations of a parabola, an ellipse and a hyperbola. (8 marks)
Show the model answer
A conic is the path of a point whose distance from a fixed point (the focus) bears a constant ratio e to its distance from a fixed line (the directrix). Parabola y² = 4ax (e = 1), ellipse x²/a² + y²/b² = 1 (e < 1), hyperbola x²/a² − y²/b² = 1 (e > 1).
Co-ordinate geometry of three dimensions
Topics: Distance and section formulae, direction cosines and ratios, projection and angle between lines.
Coordinates, distance and direction
Three mutually perpendicular axes locate any point as (x, y, z). The distance and section formulas are the same as in a plane, with a third term. If a line makes angles α, β and γ with the axes, then l = cos α, m = cos β and n = cos γ are its direction cosines, and they always satisfy l² + m² + n² = 1. Direction ratios are any three numbers proportional to them.
- d = √(Δx² + Δy² + Δz²)
- Direction ratios of a line through two points: x₂ − x₁, y₂ − y₁, z₂ − z₁
- From ratios a, b, c: l = a/√(a² + b² + c²), and similarly for m and n
Example: Find the distance between (1, 2, 3) and (4, 6, 3).
- Δx = 3, Δy = 4 and Δz = 0.
- d = √(9 + 16 + 0).
Answer: 5
Example: Find the direction cosines of a line with direction ratios 2, 3, 6.
- √(4 + 9 + 36) = 7.
- Divide each ratio by 7.
- Check: 4/49 + 9/49 + 36/49 = 1.
Answer: 2/7, 3/7, 6/7
Example: Find the point dividing the join of (1, 2, 3) and (4, 8, 9) in the ratio 1 : 2.
- x = (1 × 4 + 2 × 1)/3 = 2.
- y = (1 × 8 + 2 × 2)/3 = 4.
- z = (1 × 9 + 2 × 3)/3 = 5.
Answer: (2, 4, 5)
Projection and the angle between lines
The projection of a segment on a line with direction cosines l, m, n is lΔx + mΔy + nΔz. The angle between two lines comes from cos θ = l₁l₂ + m₁m₂ + n₁n₂, or with direction ratios, cos θ = (a₁a₂ + b₁b₂ + c₁c₂)/(√(Σa²)√(Σb²)).
Example: Find the angle between lines with direction ratios 1, 2, 2 and 2, −2, 1.
- a₁a₂ + b₁b₂ + c₁c₂ = 2 − 4 + 2 = 0.
- cos θ = 0.
Answer: 90°
In three dimensions a point is located by (x, y, z), measured along three mutually perpendicular axes. The distance and section formulas extend directly. Direction cosines (l, m, n) are the cosines of the angles a line makes with the axes, and direction ratios are any numbers proportional to them.
- The midpoint is the average of each coordinate.
- To turn direction ratios a, b, c into cosines, divide by √(a² + b² + c²).
- A point on the x-axis has y = z = 0.
- The direction cosines of the x-axis are 1, 0, 0.
- Projection of a segment on a line with direction cosines l, m, n: l(x₂ − x₁) + m(y₂ − y₁) + n(z₂ − z₁).
- The angle between two lines: cos θ = l₁l₂ + m₁m₂ + n₁n₂.
Key formulas
- d = √((x₂ − x₁)² + (y₂ − y₁)² + (z₂ − z₁)²)
- l² + m² + n² = 1
- l = a/√(a² + b² + c²)
- Projection = lΔx + mΔy + nΔz
Practice questions
The distance from (0, 0, 0) to (1, 2, 2) is
- 3
- 5
- 9
- √5
Show the answer
Answer: A. 3 √(1 + 4 + 4).
l² + m² + n² equals
- 0
- 1
- 2
- 3
Show the answer
Answer: B. 1 Standard property.
The direction cosines of the y-axis are
- 1, 0, 0
- 0, 1, 0
- 0, 0, 1
- 1, 1, 1
Show the answer
Answer: B. 0, 1, 0 Angles of 90°, 0° and 90°.
The midpoint of (2, 4, 6) and (4, 6, 8) is
- (3, 5, 7)
- (6, 10, 14)
- (1, 1, 1)
- (2, 2, 2)
Show the answer
Answer: A. (3, 5, 7) Average each coordinate.
A point on the z-axis has
- x = y = 0
- z = 0
- y = z = 0
- x = z = 0
Show the answer
Answer: A. x = y = 0 Only z is non-zero.
Theory questions
Find the distance between (1, 2, 3) and (4, 6, 3). (2 marks)
Show the model answer
√(9 + 16 + 0) = 5.
Find the direction cosines of a line with direction ratios 2, 3, 6. (3 marks)
Show the model answer
√(4 + 9 + 36) = 7, so l = 2/7, m = 3/7, n = 6/7.
Find the point dividing the join of (1, 2, 3) and (4, 8, 9) in the ratio 1:2. (8 marks)
Show the model answer
x = (1·4 + 2·1)/3 = 2; y = (8 + 4)/3 = 4; z = (9 + 6)/3 = 5. The point is (2, 4, 5).
Vectors
Topics: Unit, parallel and coplanar vectors; addition; resolution; dot and cross products; work and moment.
Vectors and their products
A vector has magnitude and direction, and it can be written a = a₁i + a₂j + a₃k. Vectors add by the triangle or parallelogram law, which simply means adding components. A unit vector has a length of 1 and is found by dividing a vector by its magnitude.
The dot product gives a number: a·b = |a||b| cos θ = a₁b₁ + a₂b₂ + a₃b₃. It is zero for perpendicular vectors, and work done is F·d. The cross product gives a vector perpendicular to both, with magnitude |a||b| sin θ. It is zero for parallel vectors, and moment is r × F.
- i·i = j·j = k·k = 1; i·j = j·k = k·i = 0
- i × j = k, j × k = i, k × i = j; j × i = −k
- a × b is found from the determinant |i j k; a₁ a₂ a₃; b₁ b₂ b₃|
Example: Find the angle between a = i + j and b = j + k.
- a·b = 0 + 1 + 0 = 1.
- |a| = √2 and |b| = √2.
- cos θ = 1/(√2 × √2) = 1/2.
Answer: 60°
Example: Find the work done by F = 2i + 3j + k in moving a body from (1, 1, 1) to (2, 3, 4).
- Displacement d = (2 − 1)i + (3 − 1)j + (4 − 1)k = i + 2j + 3k.
- W = F·d = 2(1) + 3(2) + 1(3).
Answer: 11 units
Example: Find a unit vector perpendicular to both a = i + j and b = j + k.
- a × b = (i + j) × (j + k) = i × j + i × k + j × j + j × k.
- = k − j + 0 + i = i − j + k.
- Magnitude = √3.
- Divide by the magnitude.
Answer: (i − j + k)/√3
Example: A force F = 2j acts at the point with position vector r = i + j. Find its moment about the origin.
- M = r × F = (i + j) × 2j.
- = 2(i × j) + 2(j × j).
- = 2k + 0.
Answer: 2k
A vector has magnitude and direction and is written ai + bj + ck. Vectors add by the triangle or parallelogram law. The dot product gives a number and is used for work; the cross product gives a vector perpendicular to both and is used for moment. Two vectors are perpendicular when their dot product is zero and parallel when their cross product is zero.
- |a| = √(a₁² + a₂² + a₃²); a unit vector is a/|a|.
- a·b = |a||b| cos θ.
- |a × b| = |a||b| sin θ.
- Work = F·d; moment = r × F.
Key formulas
- a·b = a₁b₁ + a₂b₂ + a₃b₃
- cos θ = a·b/(|a||b|)
- W = F·d
- M = r × F
Practice questions
The dot product of i and j is
- 0
- 1
- k
- −1
Show the answer
Answer: A. 0 They are perpendicular.
i × j equals
- 0
- 1
- k
- −k
Show the answer
Answer: C. k Right-hand rule.
The magnitude of 3i + 4j is
- 5
- 7
- 12
- 25
Show the answer
Answer: A. 5 √(9 + 16).
Perpendicular vectors have
- a·b = 0
- a × b = 0
- a = b
- |a| = |b|
Show the answer
Answer: A. a·b = 0 cos 90° = 0.
Work done is
- F × d
- F·d
- |F|/|d|
- F + d
Show the answer
Answer: B. F·d A scalar product.
Theory questions
Find a·b for a = 2i + 3j and b = i − j. (2 marks)
Show the model answer
2 − 3 = −1.
Find the work done by F = 2i + 3j + k in moving a body from (1, 1, 1) to (2, 3, 4). (5 marks)
Show the model answer
d = i + 2j + 3k. W = 2 + 6 + 3 = 11 units.
Find a unit vector perpendicular to both a = i + j and b = j + k. (8 marks)
Show the model answer
a × b = i − j + k. Its magnitude is √3, so the unit vector is (i − j + k)/√3.
Function
Topics: Definition and types of function.
What a function is
A function is a rule giving exactly one output for each input. Two inputs may share an output, but one input may not have two. The domain is the set of allowed inputs, the co-domain is the set of possible outputs, and the range is the set of outputs actually obtained.
To find a domain, look for what is not allowed: dividing by zero and taking an even root of a negative number.
- Even: f(−x) = f(x), symmetric about the y-axis, such as x² and cos x.
- Odd: f(−x) = −f(x), symmetric about the origin, such as x³ and sin x.
- Periodic: f(x + T) = f(x), such as sin x with T = 2π.
- Composite: f(g(x)) applies g first, then f.
- Explicit: y = f(x). Implicit: x² + y² = 4. Parametric: x = t², y = 2t.
Example: Find the domain of 1/(x² − 4) and of √(x − 3).
- For the first, the denominator cannot be zero: x² ≠ 4, so x ≠ ±2.
- For the second, the quantity under the root must not be negative: x − 3 ≥ 0.
Answer: All real x except ±2; and x ≥ 3
Example: Is f(x) = x³ + x odd, even or neither?
- f(−x) = (−x)³ + (−x) = −x³ − x.
- = −(x³ + x) = −f(x).
Answer: Odd
Example: If f(x) = x² and g(x) = x + 1, find f(g(x)) and g(f(x)).
- f(g(x)) = f(x + 1) = (x + 1)².
- g(f(x)) = g(x²) = x² + 1.
- These are different, so order matters.
Answer: (x + 1)² and x² + 1
A function assigns exactly one output to each input. Its domain is the set of allowed inputs and its range the set of outputs obtained. It may be even, odd or periodic. A composite function applies one function to the output of another. An implicit function is mixed with the variable in one equation, and parametric functions give x and y through a third variable.
- Avoid division by zero and even roots of negatives when finding a domain.
- cos x is even, sin x is odd, both have period 2π.
- y = f(x) is explicit; x² + y² = 4 is implicit.
- x = at², y = 2at is parametric.
Key formulas
- f(−x) = f(x): even
- f(−x) = −f(x): odd
- f(x + T) = f(x): periodic
Practice questions
x² is
- even
- odd
- periodic
- neither
Show the answer
Answer: A. even (−x)² = x².
sin x is
- even
- odd
- constant
- neither
Show the answer
Answer: B. odd sin(−x) = −sin x.
The domain of 1/(x − 2) excludes
- 0
- 1
- 2
- −2
Show the answer
Answer: C. 2 Division by zero.
The domain of √x is
- x ≥ 0
- x ≤ 0
- all real x
- x ≠ 0
Show the answer
Answer: A. x ≥ 0 No real square root of a negative.
The period of sin x is
- π
- 2π
- π/2
- 1
Show the answer
Answer: B. 2π Standard result.
Theory questions
Define odd and even functions with one example each. (3 marks)
Show the model answer
Even: f(−x) = f(x), as x². Odd: f(−x) = −f(x), as x³.
If f(x) = x² and g(x) = x + 1, find f(g(x)) and g(f(x)) and find the domain of √(x − 3). (8 marks)
Show the model answer
f(g(x)) = (x + 1)²; g(f(x)) = x² + 1. They differ. √(x − 3) needs x − 3 ≥ 0, so the domain is x ≥ 3.
Limit
Topics: Definition, standard limits and evaluation.
The idea of a limit
The limit of f(x) as x approaches a is the value f(x) gets closer to as x gets closer to a, from both sides. It does not matter what happens exactly at a. For example, (x² − 4)/(x − 2) is undefined at x = 2, yet near 2 it behaves like x + 2, so its limit is 4.
Try direct substitution first. If this gives 0/0, the form is indeterminate, which means more work is needed: factorise and cancel, rationalise, or change to a standard limit. For x → ∞, divide by the highest power of x.
- lim(x→a) (xⁿ − aⁿ)/(x − a) = naⁿ⁻¹
- lim(x→0) sin x/x = 1, with x in radians
- lim(x→0) (eˣ − 1)/x = 1
- lim(x→0) (aˣ − 1)/x = ln a
- lim(x→0) (1 + x)^(1/x) = e
Example: Evaluate lim(x→1) (x³ − 1)/(x − 1).
- Substitution gives 0/0.
- Use the standard limit with n = 3 and a = 1.
- naⁿ⁻¹ = 3(1)².
Answer: 3
Example: Evaluate lim(x→0) (√(x + 4) − 2)/x.
- Substitution gives 0/0, and there is a root, so rationalise.
- Multiply top and bottom by √(x + 4) + 2.
- Top: (x + 4) − 4 = x.
- So the fraction becomes 1/(√(x + 4) + 2).
- Now substitute x = 0: 1/(2 + 2).
Answer: 1/4
Example: Evaluate lim(x→0) (sin 3x)/x.
- Make the angle and denominator match: 3 × (sin 3x)/(3x).
- As x → 0, 3x → 0, so (sin 3x)/(3x) → 1.
Answer: 3
Example: Evaluate lim(x→∞) (3x² + 2)/(x² + 5).
- Divide top and bottom by x²: (3 + 2/x²)/(1 + 5/x²).
- As x → ∞, 2/x² and 5/x² go to 0.
Answer: 3
Example: Evaluate lim(x→0) (1 − cos x)/x².
- Use 1 − cos x = 2 sin²(x/2).
- The expression is 2 sin²(x/2)/x² = (1/2)[sin(x/2)/(x/2)]².
- The bracket tends to 1.
Answer: 1/2
The limit of f(x) as x approaches a is the value f(x) gets close to, whether or not f(a) exists. If substitution gives 0/0, simplify by factorising, rationalising or using a standard limit. For x → ∞, divide by the highest power of x. The standard limits are the tools for most problems.
- The left and right limits must agree for the limit to exist.
- The limit of a sum, product or quotient follows from the separate limits.
- 0/0 is indeterminate, not zero.
- x must be in radians in lim sin x/x.
Key formulas
- lim(x→a) (xⁿ − aⁿ)/(x − a) = naⁿ⁻¹
- lim(x→0) sin x/x = 1
- lim(x→0) (eˣ − 1)/x = 1
- lim(x→0) (aˣ − 1)/x = ln a
Practice questions
lim(x→2) (x² − 4)/(x − 2) is
- 0
- 2
- 4
- undefined
Show the answer
Answer: C. 4 (x + 2) at x = 2.
lim(x→0) sin x/x is
- 0
- 1
- ∞
- undefined
Show the answer
Answer: B. 1 Standard limit.
lim(x→∞) 1/x is
- 0
- 1
- ∞
- −1
Show the answer
Answer: A. 0 The fraction shrinks.
lim(x→0) (eˣ − 1)/x is
- 0
- 1
- e
- ∞
Show the answer
Answer: B. 1 Standard limit.
lim(x→3) (2x + 1) is
- 6
- 7
- 5
- 0
Show the answer
Answer: B. 7 Direct substitution.
Theory questions
Evaluate lim(x→1) (x³ − 1)/(x − 1). (3 marks)
Show the model answer
Using the standard limit: 3(1)² = 3.
Evaluate lim(x→0) (sin 3x)/x. (3 marks)
Show the model answer
3 lim (sin 3x)/(3x) = 3.
Evaluate lim(x→∞) (3x² + 2)/(x² + 5) and lim(x→0) (1 − cos x)/x². (8 marks)
Show the model answer
Divide by x²: the first limit is 3. For the second, 1 − cos x = 2 sin²(x/2), so the value is 2 × (1/2)² = 1/2.
Continuity of a function
Topics: Definition and testing.
Testing continuity at a point
Informally, a function is continuous if you can draw its graph without lifting the pen. Exactly, f is continuous at x = a if three things are true: f(a) is defined, the limit as x → a exists (the left and right limits agree), and the limit equals f(a). If any of these fails, the function is discontinuous there.
The usual exam question gives a piecewise function, so test it at the joining point. Differentiable functions are always continuous, but a continuous function need not be differentiable: |x| has a sharp corner at 0.
Example: Test the continuity at x = 2 of f(x) = (x² − 4)/(x − 2) for x ≠ 2, with f(2) = 5.
- f(2) = 5 is defined.
- Limit: for x ≠ 2, f(x) = x + 2, which tends to 4.
- The limit 4 does not equal f(2) = 5.
Answer: Discontinuous at x = 2
Example: Test the continuity at x = 1 of f(x) = x + 1 for x ≤ 1 and f(x) = 3 − x for x > 1.
- f(1) = 1 + 1 = 2.
- Left limit: x + 1 → 2.
- Right limit: 3 − x → 2.
- All three are equal.
Answer: Continuous at x = 1
Example: Find k so that f(x) = kx² for x ≤ 2 and f(x) = 3 for x > 2 is continuous at x = 2.
- f(2) = 4k, which is also the left limit.
- The right limit is 3.
- For continuity, 4k = 3.
Answer: k = 3/4
A function is continuous at x = a if f(a) is defined, the limit exists there, and the two are equal. On a graph this means no break, jump or hole at that point. To test, find the left limit, the right limit and the function value, and compare them.
- Polynomials, sin x and cos x are continuous everywhere.
- A rational function is discontinuous where its denominator is zero.
- A piecewise function must be checked at each joining point.
- Every differentiable function is continuous, though the converse is false: |x| at 0.
Key formulas
- lim(x→a⁻) f = lim(x→a⁺) f = f(a)
Practice questions
Continuity at x = a requires
- only f(a) defined
- only a limit
- limit = f(a)
- f(a) = 0
Show the answer
Answer: C. limit = f(a) Definition.
1/x is discontinuous at
- x = 1
- x = 0
- x = −1
- nowhere
Show the answer
Answer: B. x = 0 Undefined at zero.
|x| at x = 0 is
- continuous, not differentiable
- discontinuous
- differentiable
- undefined
Show the answer
Answer: A. continuous, not differentiable A corner, with no break.
A polynomial is continuous
- nowhere
- only at 0
- everywhere
- only for x > 0
Show the answer
Answer: C. everywhere Standard result.
If the left and right limits differ, the function has a
- jump
- maximum
- root
- period
Show the answer
Answer: A. jump A jump discontinuity.
Theory questions
Define continuity of a function at a point. (2 marks)
Show the model answer
f is continuous at x = a if f(a) exists, lim(x→a) f(x) exists, and the two are equal.
Test the continuity at x = 2 of f(x) = (x² − 4)/(x − 2) for x ≠ 2, with f(2) = 5. (8 marks)
Show the model answer
lim(x→2) f = lim (x + 2) = 4, but f(2) = 5. The limit exists but differs from the value, so f is discontinuous at x = 2.
Differentiation
Topics: First principles; function of a function, implicit and parametric functions.
From a chord to a tangent
The slope of a chord joining x and x + h on a curve is [f(x + h) − f(x)]/h. As h shrinks, the chord turns into the tangent, and its slope becomes the derivative: f′(x) = lim(h→0) [f(x + h) − f(x)]/h. Finding a derivative from this definition is called differentiating from first principles.
The derivative is a rate of change: how fast y changes per unit change of x. That is why velocity is the derivative of distance and why it is used across engineering.
- d/dx xⁿ = nxⁿ⁻¹
- d/dx sin x = cos x; d/dx cos x = −sin x; d/dx tan x = sec²x
- d/dx eˣ = eˣ; d/dx ln x = 1/x; d/dx aˣ = aˣ ln a
Example: Differentiate x² from first principles.
- f(x + h) − f(x) = (x + h)² − x² = 2xh + h².
- Divide by h: 2x + h.
- Let h → 0.
Answer: 2x
Example: Differentiate √x from first principles.
- [√(x + h) − √x]/h: multiply top and bottom by √(x + h) + √x.
- Top: (x + h) − x = h, which cancels with the h below.
- This leaves 1/(√(x + h) + √x).
- Let h → 0: 1/(2√x).
Answer: 1/(2√x)
Rules: product, quotient and chain
The product rule, (uv)′ = u′v + uv′, covers products. The quotient rule, (u/v)′ = (u′v − uv′)/v², covers fractions. The chain rule covers a function of a function: differentiate the outer function, keep the inside the same, and multiply by the derivative of the inside.
For an implicit function, differentiate every term with respect to x, remembering that y is a function of x, so y² gives 2y dy/dx. For a parametric function, dy/dx = (dy/dt)/(dx/dt).
Example: Differentiate (x² + 1)/(x − 1).
- u = x² + 1 and v = x − 1, so u′ = 2x and v′ = 1.
- Top: 2x(x − 1) − (x² + 1)(1).
- = 2x² − 2x − x² − 1 = x² − 2x − 1.
Answer: (x² − 2x − 1)/(x − 1)²
Example: Differentiate sin(x²).
- The outer function is sin, and the inside is x².
- The derivative of the outer is cos(x²).
- The derivative of the inside is 2x.
Answer: 2x cos(x²)
Example: Find dy/dx if x² + xy + y² = 7.
- Differentiate each term: 2x + (y + x dy/dx) + 2y dy/dx = 0.
- Collect terms: (x + 2y) dy/dx = −(2x + y).
Answer: dy/dx = −(2x + y)/(x + 2y)
Example: Find dy/dx if x = at² and y = 2at.
- dx/dt = 2at.
- dy/dt = 2a.
- dy/dx = 2a/(2at).
Answer: 1/t
The derivative is the rate of change of a function, defined from first principles as the limit of [f(x + h) − f(x)]/h as h → 0. Standard results and the sum, product, quotient and chain rules give most derivatives quickly. For an implicit function, differentiate both sides with respect to x. For a parametric one, dy/dx = (dy/dt)/(dx/dt).
- The chain rule: dy/dx = (dy/du)(du/dx).
- d/dx (ln x) = 1/x and d/dx (tan x) = sec²x.
- d/dx (cos x) = −sin x.
- A velocity is the derivative of displacement.
Key formulas
- f′(x) = lim(h→0) [f(x + h) − f(x)]/h
- d/dx xⁿ = nxⁿ⁻¹
- dy/dx = (dy/dt)/(dx/dt)
Practice questions
d/dx (x³) is
- 3x²
- x²
- 3x
- x³/3
Show the answer
Answer: A. 3x² Power rule.
d/dx (sin x) is
- −cos x
- cos x
- sin x
- tan x
Show the answer
Answer: B. cos x Standard result.
d/dx (ln x) is
- x
- 1/x
- eˣ
- ln x
Show the answer
Answer: B. 1/x Standard result.
d/dx (x sin x) is
- sin x + x cos x
- cos x
- x cos x
- sin x − x cos x
Show the answer
Answer: A. sin x + x cos x Product rule.
d/dx (sin 2x) is
- cos 2x
- 2 cos 2x
- −2 cos 2x
- 2 sin x
Show the answer
Answer: B. 2 cos 2x Chain rule.
If x = t² and y = t³, dy/dx is
- 3t/2
- 2t/3
- 3t²
- t
Show the answer
Answer: A. 3t/2 3t²/(2t).
Theory questions
Differentiate x² from first principles. (5 marks)
Show the model answer
[(x + h)² − x²]/h = (2xh + h²)/h = 2x + h, which tends to 2x as h → 0.
Find dy/dx if x² + y² = 25. (3 marks)
Show the model answer
2x + 2y dy/dx = 0, so dy/dx = −x/y.
Differentiate (x² + 1)/(x − 1) and find d/dx of e^(3x) sin x. (8 marks)
Show the model answer
Quotient rule: [2x(x − 1) − (x² + 1)]/(x − 1)² = (x² − 2x − 1)/(x − 1)². Product rule: e^(3x)(3 sin x + cos x).
Applications of derivatives
Topics: Tangent and normal; angle between curves; second derivative; maxima and minima.
Tangents, normals and motion
The derivative at a point gives the slope of the tangent there, so its equation follows from the point-slope form. The normal is perpendicular to the tangent, so its slope is the negative reciprocal. If distance s depends on time, then velocity is v = ds/dt and acceleration is a = dv/dt.
Example: Find the tangent and normal to y = x² + 1 at (1, 2).
- dy/dx = 2x, which equals 2 at x = 1.
- Tangent: y − 2 = 2(x − 1), so y = 2x.
- Normal slope = −1/2.
- Normal: y − 2 = −(1/2)(x − 1), so x + 2y = 5.
Answer: Tangent y = 2x, normal x + 2y = 5
Example: A particle moves with s = t³ − 6t² + 9t. Find when it stops, and its acceleration at t = 3.
- v = ds/dt = 3t² − 12t + 9 = 3(t − 1)(t − 3).
- It stops when v = 0, at t = 1 and t = 3.
- a = dv/dt = 6t − 12.
- At t = 3, a = 18 − 12 = 6.
Answer: It stops at t = 1 and 3; the acceleration at t = 3 is 6
Maxima and minima
At the top of a hill or the bottom of a valley on a curve, the tangent is flat, so f′(x) = 0. These stationary points are the candidates. The second derivative tells which is which. If f″ is negative, the curve bends downward, which gives a maximum. If f″ is positive, the curve bends upward, which gives a minimum.
For a practical problem, write the quantity to be maximised in terms of one variable, differentiate, set the result to zero, and confirm with the second derivative.
- Step 1: find f′(x) and solve f′(x) = 0.
- Step 2: find f″(x) at each solution.
- Step 3: negative means maximum, positive means minimum.
- Step 4: put x into f(x) to get the value.
Example: Find the maximum and minimum values of y = x³ − 6x² + 9x.
- y′ = 3x² − 12x + 9 = 3(x − 1)(x − 3), so x = 1 or 3.
- y″ = 6x − 12.
- At x = 1: y″ = −6, a maximum, and y = 1 − 6 + 9 = 4.
- At x = 3: y″ = 6, a minimum, and y = 27 − 54 + 27 = 0.
Answer: Maximum 4 at x = 1; minimum 0 at x = 3
Example: Show that of all rectangles of perimeter 40 cm, the square has the greatest area.
- Let the sides be x and 20 − x.
- A = x(20 − x) = 20x − x².
- A′ = 20 − 2x = 0, so x = 10.
- A″ = −2, which is negative, so this is a maximum.
- Both sides are then 10 cm.
Answer: A square of side 10 cm, with an area of 100 cm²
Example: An open box is made from a 12 cm square sheet by cutting equal squares of side x from the corners. Find x for the largest volume.
- The base has side 12 − 2x, and the height is x.
- V = x(12 − 2x)².
- V′ = (12 − 2x)² − 4x(12 − 2x) = (12 − 2x)(12 − 6x).
- V′ = 0 at x = 6 (no box) or x = 2.
- At x = 2: V = 2 × 8² = 128.
Answer: x = 2 cm, with a volume of 128 cm³
The first derivative at a point is the slope of the tangent there, and the normal is perpendicular to it. To find a maximum or minimum, set f′(x) = 0 and test the sign of f″(x): negative means a maximum and positive a minimum. In motion, velocity is ds/dt and acceleration is d²s/dt².
- Tangent: y − y₁ = m(x − x₁).
- Normal: y − y₁ = −(1/m)(x − x₁).
- A stationary point has f′(x) = 0.
- In a problem, express the quantity in one variable before differentiating.
- The angle between two curves at a common point is the angle between their tangents there.
Key formulas
- v = ds/dt, a = dv/dt = d²s/dt²
- y − y₁ = f′(x₁)(x − x₁)
Practice questions
At a maximum, f″(x) is
- positive
- negative
- zero always
- infinite
Show the answer
Answer: B. negative Second-derivative test.
The slope of the tangent to y = x² at x = 1 is
- 1
- 2
- 3
- 0
Show the answer
Answer: B. 2 dy/dx = 2x.
If s = t², velocity at t = 3 is
- 3
- 6
- 9
- 2
Show the answer
Answer: B. 6 v = 2t.
If the tangent’s slope is 2, the normal’s slope is
- 2
- −2
- 1/2
- −1/2
Show the answer
Answer: D. −1/2 −1/m.
x² − 4x has a minimum at x =
- 0
- 2
- 4
- −2
Show the answer
Answer: B. 2 f′ = 2x − 4 = 0.
The angle of intersection of two curves is the angle between their
- normals only
- tangents
- axes
- chords
Show the answer
Answer: B. tangents Tangents at the common point.
Theory questions
Find the equation of the tangent to y = x² + 1 at (1, 2). (3 marks)
Show the model answer
Slope = 2x = 2. y − 2 = 2(x − 1), so y = 2x.
Find the maximum value of f(x) = 12x − x². (5 marks)
Show the model answer
f′ = 12 − 2x = 0, so x = 6. f″ = −2 < 0, a maximum. f(6) = 36.
Show that of all rectangles with a fixed perimeter of 40 cm the square has the greatest area. (8 marks)
Show the model answer
Sides x and 20 − x. A = 20x − x². A′ = 20 − 2x = 0, so x = 10; A″ = −2 < 0, a maximum. Both sides are 10 cm, which is a square, with an area of 100 cm².
Integration
Topics: Inverse of differentiation; standard functions.
Integration as reverse differentiation
Integration undoes differentiation. If F′(x) = f(x), then ∫f(x) dx = F(x) + C. The constant C is needed because every constant differentiates to zero, so a whole family of curves has the same slope at each x. A further condition, such as a point on the curve, fixes C.
- ∫xⁿ dx = xⁿ⁺¹/(n + 1) + C, for n ≠ −1
- ∫1/x dx = ln|x| + C
- ∫eˣ dx = eˣ + C; ∫aˣ dx = aˣ/ln a + C
- ∫sin x dx = −cos x + C; ∫cos x dx = sin x + C
- ∫sec²x dx = tan x + C
- ∫1/(1 + x²) dx = tan⁻¹x + C; ∫1/√(1 − x²) dx = sin⁻¹x + C
Example: Evaluate ∫(3x² + 2x + 1) dx.
- Integrate term by term.
- ∫3x² dx = x³; ∫2x dx = x²; ∫1 dx = x.
Answer: x³ + x² + x + C
Example: Evaluate ∫(x² + 1)/x dx.
- Split: (x² + 1)/x = x + 1/x.
- ∫x dx = x²/2, and ∫1/x dx = ln|x|.
Answer: x²/2 + ln|x| + C
Example: Evaluate ∫tan²x dx.
- There is no direct formula, so use tan²x = sec²x − 1.
- ∫sec²x dx − ∫1 dx.
Answer: tan x − x + C
Example: A curve has dy/dx = 2x and passes through (1, 3). Find its equation.
- y = ∫2x dx = x² + C.
- At (1, 3): 3 = 1 + C, so C = 2.
Answer: y = x² + 2
Integration is the reverse of differentiation: if F′(x) = f(x), then ∫f(x) dx = F(x) + C. The constant C appears because a constant vanishes on differentiation. Use the list of standard results and the fact that the integral of a sum is the sum of the integrals. Constants can be taken outside the integral sign.
- ∫xⁿ dx fails for n = −1, which gives ln|x|.
- ∫sec²x dx = tan x + C.
- ∫1/(1 + x²) dx = tan⁻¹x + C.
- ∫1/√(1 − x²) dx = sin⁻¹x + C.
Key formulas
- ∫xⁿ dx = xⁿ⁺¹/(n + 1) + C, n ≠ −1
- ∫aˣ dx = aˣ/ln a + C
- ∫sec²x dx = tan x + C
Practice questions
∫x² dx is
- x³/3 + C
- 2x + C
- x³ + C
- x²/2 + C
Show the answer
Answer: A. x³/3 + C Power rule.
∫cos x dx is
- −sin x + C
- sin x + C
- cos x + C
- tan x + C
Show the answer
Answer: B. sin x + C Standard result.
∫1/x dx is
- x + C
- ln|x| + C
- −1/x² + C
- eˣ + C
Show the answer
Answer: B. ln|x| + C Standard result.
∫eˣ dx is
- eˣ + C
- xeˣ + C
- ln x + C
- e + C
Show the answer
Answer: A. eˣ + C Standard result.
Integration is the inverse of
- addition
- differentiation
- multiplication
- division
Show the answer
Answer: B. differentiation Definition.
Theory questions
Evaluate ∫(3x² + 2x + 1) dx. (3 marks)
Show the model answer
x³ + x² + x + C.
Evaluate ∫(eˣ + sin x + 1/x) dx and explain why a constant is added. (8 marks)
Show the model answer
eˣ − cos x + ln|x| + C. The derivative of any constant is zero, so all antiderivatives differ by a constant.
Methods of integration
Topics: Substitution, parts and algebraic fractions.
Substitution
Look for a function together with its derivative. Replace the function by t, and replace its derivative with dx by dt. The integral becomes a standard form. Afterwards, put back the original variable. Two useful results follow: ∫f′(x)/f(x) dx = ln|f(x)| + C, and ∫[f(x)]ⁿf′(x) dx = [f(x)]ⁿ⁺¹/(n + 1) + C.
Example: Evaluate ∫2x(x² + 1)³ dx.
- Let t = x² + 1, so dt = 2x dx.
- The integral becomes ∫t³ dt = t⁴/4 + C.
- Put back t.
Answer: (x² + 1)⁴/4 + C
Example: Evaluate ∫tan x dx.
- Write tan x = sin x/cos x.
- Let t = cos x, so dt = −sin x dx.
- ∫−dt/t = −ln|t| + C.
Answer: −ln|cos x| + C
Integration by parts
For a product of two different kinds of function, use ∫u dv = uv − ∫v du. It comes from the product rule. The choice of u matters: pick the one that gets simpler when differentiated, using the order ILATE (Inverse, Logarithmic, Algebraic, Trigonometric, Exponential). The earlier in the list, the better a choice for u.
Example: Evaluate ∫x cos x dx.
- Algebraic comes before trigonometric: u = x and dv = cos x dx.
- du = dx and v = sin x.
- x sin x − ∫sin x dx.
Answer: x sin x + cos x + C
Example: Evaluate ∫ln x dx.
- Take u = ln x and dv = dx.
- du = dx/x and v = x.
- x ln x − ∫x(1/x) dx = x ln x − ∫1 dx.
Answer: x ln x − x + C
Example: Evaluate ∫x²eˣ dx.
- u = x², dv = eˣ dx: this gives x²eˣ − ∫2xeˣ dx.
- Apply parts again to ∫xeˣ dx = xeˣ − eˣ.
- x²eˣ − 2(xeˣ − eˣ).
Answer: eˣ(x² − 2x + 2) + C
Algebraic fractions
To integrate a rational function, split it into partial fractions. Each piece then gives a logarithm. If the fraction is improper, divide first.
Example: Evaluate ∫(3x + 5)/((x + 1)(x + 2)) dx.
- Partial fractions: 2/(x + 1) + 1/(x + 2).
- Integrate each one.
Answer: 2 ln|x + 1| + ln|x + 2| + C
Example: Evaluate ∫1/(x² − 1) dx.
- 1/((x − 1)(x + 1)) = (1/2)[1/(x − 1) − 1/(x + 1)].
- Integrate: (1/2)[ln|x − 1| − ln|x + 1|].
Answer: (1/2) ln|(x − 1)/(x + 1)| + C
Substitution replaces a part of the integrand by t, so that its derivative also appears. Integration by parts handles products: ∫u dv = uv − ∫v du, choosing u by the ILATE order (inverse, logarithmic, algebraic, trigonometric, exponential). A rational function is split into partial fractions, and each part is then integrated.
- ∫f′(x)/f(x) dx = ln|f(x)| + C.
- ∫[f(x)]ⁿ f′(x) dx = [f(x)]ⁿ⁺¹/(n + 1) + C.
- Change everything to the new variable, including dx.
- A fraction needs its numerator degree below the denominator’s before splitting.
Key formulas
- ∫u dv = uv − ∫v du
- ∫f′/f dx = ln|f| + C
Practice questions
∫2x/(x² + 1) dx is
- ln(x² + 1) + C
- 2x + C
- tan⁻¹x + C
- x² + C
Show the answer
Answer: A. ln(x² + 1) + C f′/f form.
∫x eˣ dx is
- xeˣ + C
- eˣ(x − 1) + C
- eˣ(x + 1) + C
- x²eˣ/2 + C
Show the answer
Answer: B. eˣ(x − 1) + C By parts.
In ILATE, “L” stands for
- linear
- logarithmic
- limit
- lambda
Show the answer
Answer: B. logarithmic Order for choosing u.
∫sin x cos x dx with t = sin x is
- t²/2 + C
- t + C
- −t + C
- 2t + C
Show the answer
Answer: A. t²/2 + C dt = cos x dx.
∫1/((x − 1)(x + 1)) dx needs
- parts
- partial fractions
- nothing
- the chain rule
Show the answer
Answer: B. partial fractions A product of linear factors.
Theory questions
Evaluate ∫x cos x dx. (5 marks)
Show the model answer
u = x, dv = cos x dx: x sin x − ∫sin x dx = x sin x + cos x + C.
Evaluate ∫(2x + 3)⁵ dx. (3 marks)
Show the model answer
With t = 2x + 3, dx = dt/2: t⁶/12 + C = (2x + 3)⁶/12 + C.
Evaluate ∫x²eˣ dx and ∫1/(x² − 1) dx. (8 marks)
Show the model answer
By parts twice: eˣ(x² − 2x + 2) + C. Partial fractions: (1/2)[1/(x − 1) − 1/(x + 1)], which integrates to (1/2) ln|(x − 1)/(x + 1)| + C.
Definite integral
Topics: Limit of a sum, fundamental theorem, properties and evaluation.
The definite integral
To find the area under a curve, cut it into thin strips and add their areas. As the strips get thinner, the total approaches an exact value: the definite integral ∫ₐᵇ f(x) dx. The fundamental theorem gives a far quicker way than adding strips: find any antiderivative F and calculate F(b) − F(a). The constant C cancels, so it is not written.
Example: Evaluate ∫₀² (3x² + 1) dx.
- The antiderivative is x³ + x.
- At x = 2: 8 + 2 = 10.
- At x = 0: 0.
- Subtract.
Answer: 10
Example: Evaluate ∫₀¹ x dx as the limit of a sum.
- Divide [0, 1] into n strips of width 1/n, with heights 1/n, 2/n, … n/n.
- Sum = (1/n)(1/n + 2/n + … + n/n) = (1/n²)(n(n + 1)/2).
- = (1 + 1/n)/2.
- As n → ∞, 1/n → 0.
Answer: 1/2
Example: Evaluate ∫₀¹ 2x(x² + 1)³ dx.
- Let t = x² + 1, so dt = 2x dx.
- Change the limits: x = 0 gives t = 1, and x = 1 gives t = 2.
- ∫₁² t³ dt = [t⁴/4] from 1 to 2.
- = 16/4 − 1/4.
Answer: 15/4
Properties
Properties of definite integrals can make difficult problems short, so check for them first. Recognising an odd function over a symmetric interval, for instance, gives zero immediately.
- ∫ₐᵇ f = −∫ᵦₐ f
- ∫ₐᵇ f = ∫ₐᶜ f + ∫꜀ᵇ f
- ∫₀ᵃ f(x) dx = ∫₀ᵃ f(a − x) dx
- ∫₋ₐᵃ f = 2∫₀ᵃ f if f is even, and 0 if f is odd
Example: Evaluate ∫₋₁¹ (x³ + x) dx.
- f(−x) = −x³ − x = −f(x), so f is odd.
- The interval is symmetric about 0.
Answer: 0
Example: Evaluate ∫₀^(π/2) sin x/(sin x + cos x) dx.
- Call the integral I, and replace x by π/2 − x.
- sin(π/2 − x) = cos x and cos(π/2 − x) = sin x, so I = ∫₀^(π/2) cos x/(cos x + sin x) dx.
- Add the two forms: 2I = ∫₀^(π/2) 1 dx = π/2.
Answer: π/4
A definite integral is the limit of a sum and has a number as its value. By the fundamental theorem, find an antiderivative and subtract its values at the limits, so no constant is needed. Its properties, such as splitting the interval and replacing x by a − x, simplify many problems.
- ∫ₐᵃ f dx = 0.
- ∫ₐᵇ f = ∫ₐᶜ f + ∫꜀ᵇ f.
- For an even function, ∫₋ₐᵃ f = 2∫₀ᵃ f.
- When substituting, change the limits too.
Key formulas
- ∫ₐᵇ f(x) dx = F(b) − F(a)
- ∫₀ᵃ f(x) dx = ∫₀ᵃ f(a − x) dx
Practice questions
∫₀¹ x dx is
- 1
- 1/2
- 2
- 0
Show the answer
Answer: B. 1/2 [x²/2] from 0 to 1.
∫₀^π sin x dx is
- 0
- 1
- 2
- π
Show the answer
Answer: C. 2 [−cos x] = 1 + 1.
∫₋₁¹ x³ dx is
- 0
- 1
- 2
- 1/2
Show the answer
Answer: A. 0 An odd function.
∫ₐᵃ f(x) dx is
- 0
- a
- f(a)
- 1
Show the answer
Answer: A. 0 Equal limits.
A definite integral has
- +C
- no constant
- always a positive value
- two values
Show the answer
Answer: B. no constant The constant cancels.
Theory questions
Evaluate ∫₀² (3x² + 1) dx. (3 marks)
Show the model answer
[x³ + x] from 0 to 2 = 8 + 2 = 10.
Evaluate ∫₀^(π/2) cos x dx. (3 marks)
Show the model answer
[sin x] = 1.
Using a property, evaluate ∫₀^(π/2) sin x/(sin x + cos x) dx. (8 marks)
Show the model answer
Let I be the integral. Replacing x by π/2 − x gives I = ∫ cos x/(sin x + cos x) dx. Adding, 2I = ∫₀^(π/2) 1 dx = π/2, so I = π/4.
Application of integration
Topics: Areas under curves.
Areas under and between curves
The area between y = f(x), the x-axis and the lines x = a and x = b is ∫ₐᵇ y dx. For the area between two curves, each thin strip runs from the lower curve up to the upper one, so integrate (upper − lower) between the x-values where they meet.
Always sketch the region first. A region below the x-axis gives a negative integral, so take its magnitude. If a curve crosses the axis, split the integral there, since otherwise the parts cancel.
Example: Find the area under y = x² + 1 from x = 0 to x = 3.
- A = ∫₀³ (x² + 1) dx = [x³/3 + x].
- At x = 3: 9 + 3 = 12.
- At x = 0: 0.
Answer: 12 square units
Example: Find the area between y = x and y = x².
- They meet where x = x², so x = 0 or 1.
- On this interval, y = x lies above y = x².
- A = ∫₀¹ (x − x²) dx = [x²/2 − x³/3].
- = 1/2 − 1/3.
Answer: 1/6 square unit
Example: Find the area bounded by y = x² − 1 and the x-axis from x = 0 to x = 1.
- ∫₀¹ (x² − 1) dx = [x³/3 − x] = 1/3 − 1 = −2/3.
- The region is below the axis, so the integral is negative.
- Take the magnitude.
Answer: 2/3 square unit
Example: Find the area enclosed by the parabola y² = 4x and the line x = 1.
- The curve is symmetric about the x-axis, so double the upper half, y = 2√x.
- A = 2∫₀¹ 2√x dx = 4∫₀¹ x^(1/2) dx.
- = 4 × [(2/3)x^(3/2)] from 0 to 1 = 4 × 2/3.
Answer: 8/3 square units
The area under y = f(x) between x = a and x = b, above the x-axis, is the definite integral of y. To find the area between two curves, integrate the upper curve minus the lower, between the x-values where they meet. An area below the x-axis gives a negative integral, so take its magnitude.
- Always sketch the region first.
- Area with the y-axis: ∫ x dy.
- Split the integral if the curve crosses the axis.
- A circle of radius a has area πa²: a useful check.
Key formulas
- A = ∫ₐᵇ y dx
- A = ∫ₐᵇ (y₁ − y₂) dx
Practice questions
The area under y = 2 from x = 0 to 3 is
- 2
- 3
- 5
- 6
Show the answer
Answer: D. 6 A rectangle.
The area under y = x from 0 to 2 is
- 1
- 2
- 4
- 8
Show the answer
Answer: B. 2 [x²/2] = 2.
Between curves, the integrand is
- upper + lower
- upper − lower
- upper × lower
- upper/lower
Show the answer
Answer: B. upper − lower Vertical strip height.
The area under y = x² from 0 to 3 is
- 3
- 9
- 27
- 6
Show the answer
Answer: B. 9 [x³/3] = 9.
A negative integral means the region is
- larger
- below the x-axis
- empty
- circular
Show the answer
Answer: B. below the x-axis Take the magnitude.
Theory questions
Find the area under y = x² + 1 from x = 0 to x = 3. (3 marks)
Show the model answer
[x³/3 + x] = 9 + 3 = 12 square units.
Find the area enclosed between y = x and y = x². (8 marks)
Show the model answer
They meet at x = 0 and 1, with y = x on top. A = ∫₀¹ (x − x²) dx = 1/2 − 1/3 = 1/6 square units.
Chapters follow the SCTE Assam syllabus. The notes and questions were written for this studio and are not official.