Units and dimensions
Topics: Physical quantities, units and SI; errors, accuracy, precision and significant figures; dimensional analysis and its limitations.
Physical quantities and units
Anything we can measure is a physical quantity, and every measurement has two parts: a number and a unit. Saying a rod is “5” means nothing until we add metres or centimetres. A unit is simply an agreed standard that we compare against.
Seven quantities are chosen as fundamental because they do not depend on one another: length, mass, time, electric current, temperature, amount of substance and luminous intensity. Their SI units are the metre, kilogram, second, ampere, kelvin, mole and candela. Every other quantity is derived from these. Speed, for example, is length divided by time, so its unit is m/s.
- Force: newton, 1 N = 1 kg m/s²
- Energy: joule, 1 J = 1 N m
- Power: watt, 1 W = 1 J/s
- Pressure: pascal, 1 Pa = 1 N/m²
- Older systems: CGS (cm, g, s) and FPS (foot, pound, second)
Example: Express 1 newton in dynes, the CGS unit of force.
- 1 N = 1 kg × 1 m/s².
- Change the units: 1 kg = 1000 g and 1 m = 100 cm.
- 1 N = 1000 g × 100 cm/s² = 100000 g cm/s².
Answer: 1 N = 10⁵ dyne
Errors, accuracy and significant figures
No measurement is perfect. Systematic errors push every reading the same way, for example a scale with a bent zero, and they can be corrected once found. Random errors scatter the readings above and below the true value, and taking an average of many readings reduces them.
Accuracy means being close to the true value. Precision means repeated readings agree with each other. A set of readings can be precise and still inaccurate, as happens with an instrument that has a zero error. The smallest division an instrument can read is its least count, and that limits how exactly it can measure.
Significant figures show how exactly a value is known. All non-zero digits count. Zeros between digits count, and trailing zeros after a decimal point count, but leading zeros only mark the place value. So 0.00450 has three significant figures. When multiplying or dividing, keep as many significant figures as the least exact value has.
- Absolute error = |measured value − true value|
- Relative error = absolute error/true value
- Percentage error = relative error × 100
- In a product or quotient, percentage errors add
Example: A length of 10.0 cm is measured as 9.8 cm. Find the absolute, relative and percentage errors.
- Absolute error = |9.8 − 10.0| = 0.2 cm.
- Relative error = 0.2/10.0 = 0.02.
- Percentage error = 0.02 × 100.
Answer: 0.2 cm, 0.02 and 2%
Example: Voltage is measured with a 2% error and current with a 1% error. Find the percentage error in R = V/I.
- R is a quotient, so percentage errors add.
- Error in R = 2% + 1%.
Answer: 3%
Example: Give 3.2 × 1.456 to the correct number of significant figures.
- The calculator gives 4.6592.
- 3.2 has two significant figures and 1.456 has four.
- Keep two, the smaller number.
Answer: 4.7
Dimensions and what they are used for
The dimensions of a quantity show how it is built from mass [M], length [L] and time [T]. Velocity is length/time, so its dimensional formula is [LT⁻¹]. Force is mass × acceleration, which gives [MLT⁻²]. Pure numbers and ratios such as strain and angle have no dimensions.
The principle of homogeneity says that every term in a correct equation must have the same dimensions, because you cannot add metres to seconds. This gives us three uses: checking an equation, converting units, and working out the form of a relation.
The method has limits. It cannot find number constants such as the 2π in a pendulum’s formula. It cannot derive relations that contain sums of terms, or trigonometric and exponential functions. An equation with correct dimensions may still be wrong, for example if a constant is wrong.
- Force [MLT⁻²]
- Work and energy [ML²T⁻²]
- Power [ML²T⁻³]
- Pressure and stress [ML⁻¹T⁻²]
- Momentum and impulse [MLT⁻¹]
Example: Check v² = u² + 2as by dimensions.
- Left side: [v²] = [LT⁻¹]² = [L²T⁻²].
- First right term: [u²] = [L²T⁻²].
- Second right term: [as] = [LT⁻²][L] = [L²T⁻²]. The number 2 has no dimensions.
- All terms match.
Answer: The equation is dimensionally correct
Example: Using dimensions, find how the period T of a pendulum depends on its length l and g.
- Suppose T = k lᵃ gᵇ, where k is a pure number.
- Dimensions: [T] = [L]ᵃ[LT⁻²]ᵇ = [Lᵃ⁺ᵇ T⁻²ᵇ].
- Compare powers of T: −2b = 1, so b = −1/2.
- Compare powers of L: a + b = 0, so a = 1/2.
Answer: T = k√(l/g); experiment gives k = 2π
A physical quantity is a number with a unit. Fundamental quantities such as length, mass and time are independent, and derived ones are built from them. SI is the standard system. A measurement can have random or systematic errors. Dimensions show how a quantity depends on M, L and T, and the principle of homogeneity says that both sides of a correct equation must have the same dimensions.
- Accuracy is closeness to the true value; precision is closeness of repeated readings.
- Relative error = absolute error/true value; multiply by 100 for percentage error.
- Dimensional analysis can convert units, check equations and derive relations.
- It cannot find numerical constants or handle sums of terms.
Key formulas
- % error = (Δa/a) × 100
- Force [MLT⁻²]
- Work, energy [ML²T⁻²]
- Power [ML²T⁻³]
- Pressure [ML⁻¹T⁻²]
Practice questions
The SI unit of force is
- dyne
- newton
- joule
- pascal
Show the answer
Answer: B. newton 1 N = 1 kg m/s².
The dimensional formula of energy is
- MLT⁻²
- ML²T⁻²
- ML²T⁻³
- MLT⁻¹
Show the answer
Answer: B. ML²T⁻² Force × distance.
Which is a fundamental quantity?
- Force
- Velocity
- Time
- Energy
Show the answer
Answer: C. Time SI base quantity.
The number of significant figures in 0.00450 is
- 2
- 3
- 5
- 6
Show the answer
Answer: B. 3 Leading zeros do not count; the trailing zero does.
Errors from a faulty instrument are
- random
- systematic
- gross only
- none
Show the answer
Answer: B. systematic They shift all readings the same way.
Dimensional analysis cannot find
- unit conversions
- dimensionless constants
- equation checks
- forms of relations
Show the answer
Answer: B. dimensionless constants Constants have no dimensions.
Theory questions
Distinguish between accuracy and precision. (2 marks)
Show the model answer
Accuracy is how close a measurement is to the true value; precision is how close repeated measurements are to one another.
Check the correctness of s = ut + ½at² by dimensions. (3 marks)
Show the model answer
[s] = L; [ut] = LT⁻¹·T = L; [at²] = LT⁻²·T² = L. All terms are L, so the equation is dimensionally correct.
State the principle of homogeneity. Derive by dimensions the time period of a simple pendulum, given that it depends on length and g. (8 marks)
Show the model answer
Both sides of a correct equation must have the same dimensions. Let T = k lᵃgᵇ. Then T¹ = Lᵃ(LT⁻²)ᵇ, so a + b = 0 and −2b = 1, giving b = −1/2 and a = 1/2. So T = k√(l/g); experiment gives k = 2π.
Basic mechanics (force and motion)
Topics: Vectors; equations of motion; Newton’s laws, momentum, impulse; circular motion, banking; rotational motion, torque, moment of inertia.
Scalars, vectors and resolving
A scalar has size only, such as mass, time or energy. A vector has size and direction, such as displacement, velocity or force. Direction changes the answer: two 5 N forces can add to 10 N, cancel to zero, or give anything in between, depending on the angle between them.
To add two vectors at an angle, use the parallelogram law, which gives the resultant in the formula below. It is often easier to do the opposite: split a vector into two parts at right angles. A force F at angle θ to the horizontal has a horizontal part F cos θ and a vertical part F sin θ, and these two parts together do the same job as F itself.
- R² = A² + B² + 2AB cos θ
- Direction: tan α = B sin θ/(A + B cos θ)
- Same direction: R = A + B. Opposite: R = A − B
- Fx = F cos θ, Fy = F sin θ
Example: Forces of 3 N and 4 N act at right angles. Find the resultant.
- With θ = 90°, cos θ = 0, so R² = 3² + 4² = 25.
- R = 5 N.
- Direction from the 3 N force: tan α = 4/3, so α ≈ 53.1°.
Answer: 5 N, at about 53.1° to the 3 N force
Example: Two 5 N forces act at 60° to each other. Find the resultant.
- R² = 5² + 5² + 2(5)(5) cos 60°.
- = 25 + 25 + 25 = 75.
- R = √75.
Answer: About 8.66 N
Example: Resolve a 100 N force at 30° to the ground.
- Horizontal part: 100 cos 30° = 100 × 0.866.
- Vertical part: 100 sin 30° = 100 × 0.5.
Answer: 86.6 N horizontally and 50 N vertically
Equations of motion
For a body moving in a straight line with constant acceleration, three equations connect initial velocity u, final velocity v, acceleration a, time t and displacement s. Each equation leaves out one quantity, so choose the one that leaves out what you neither know nor need.
A slowing body has negative acceleration. Take one direction as positive and keep to it throughout the question. A body falling freely uses the same equations with a = g, which is about 9.8 m/s² downward.
- v = u + at
- s = ut + ½at²
- v² = u² + 2as
Example: A car at 10 m/s accelerates at 2 m/s² for 5 s. Find its final speed and the distance covered.
- v = u + at = 10 + 2 × 5 = 20 m/s.
- s = ut + ½at² = 10 × 5 + ½ × 2 × 25 = 50 + 25 = 75 m.
- Check using the third equation: v² = 100 + 2 × 2 × 75 = 400, so v = 20 m/s.
Answer: 20 m/s and 75 m
Example: A ball is thrown straight up at 20 m/s. Taking g = 10 m/s², find the greatest height and the time to reach it.
- At the top v = 0, and gravity opposes the motion, so a = −10.
- 0 = 20² − 2 × 10 × s, which gives s = 400/20 = 20 m.
- 0 = 20 − 10t, which gives t = 2 s.
Answer: 20 m in 2 s
Newton’s laws, momentum and impulse
The first law says that a body keeps its state of rest or uniform motion unless a net force acts on it. This tendency is called inertia, and mass measures it. The second law says that force equals the rate of change of momentum, which gives F = ma when mass is constant. The third law says that forces come in equal and opposite pairs that act on different bodies, so they never cancel each other.
Momentum p = mv measures the quantity of motion. If no external force acts on a system, its total momentum stays constant. When a gun fires, the total momentum was zero before, so it must be zero after: the bullet goes forward and the gun recoils backward. The gun is far heavier, so it moves far more slowly.
Impulse is force multiplied by the time it acts, and it equals the change in momentum. This explains why a cricketer pulls the hands back when catching a ball. The same change in momentum over a longer time needs a smaller force. Airbags and vehicle crumple zones work on the same idea.
- p = mv
- F = ma = Δp/t
- Impulse = Ft = mv − mu
- Recoil: mv + MV = 0
Example: A 2000 kg car travelling at 20 m/s stops in 10 s. Find the average braking force.
- a = (0 − 20)/10 = −2 m/s².
- F = ma = 2000 × (−2) = −4000 N.
- The minus sign shows that the force opposes the motion.
Answer: 4000 N
Example: A 5 kg gun fires a 50 g bullet at 200 m/s. Find the recoil velocity.
- Change the mass of the bullet: m = 0.05 kg.
- Total momentum before firing is 0.
- 0 = 0.05 × 200 + 5V, so 5V = −10.
- V = −2 m/s. The minus sign means opposite to the bullet.
Answer: 2 m/s backwards
Example: A 0.15 kg ball reaches a bat at 20 m/s and goes back at 20 m/s. Contact lasts 0.01 s. Find the impulse and the average force.
- The direction reverses, so the change in velocity is 20 − (−20) = 40 m/s.
- Impulse = 0.15 × 40 = 6 N s.
- F = impulse/time = 6/0.01.
Answer: 6 N s and 600 N
Circular motion and banking of roads
A body moving in a circle at constant speed is still accelerating, because its direction keeps changing. The velocity lies along the tangent, and the acceleration points toward the centre. The force causing this, the centripetal force, is F = mv²/r. It is not a new kind of force: tension, friction or gravity supplies it.
Angle turned in unit time is the angular velocity ω, measured in rad/s, and v = rω. On a flat road, only friction provides the centripetal force for a car taking a bend. On a wet road this may not be enough. So the outer edge of the road is raised, which is called banking. A part of the normal reaction then provides the force, and the correct angle is given by tan θ = v²/(rg).
- ω = 2π/T = 2πf
- v = rω
- a = v²/r = rω²
- F = mv²/r
- tan θ = v²/(rg)
Example: A 1000 kg car takes a curve of radius 100 m at 20 m/s. Find the centripetal force.
- F = mv²/r.
- = 1000 × 20²/100.
- = 1000 × 4.
Answer: 4000 N
Example: A wheel of radius 0.5 m turns at 120 revolutions per minute. Find its rim speed.
- f = 120/60 = 2 revolutions per second.
- ω = 2πf = 4π ≈ 12.57 rad/s.
- v = rω = 0.5 × 12.57.
Answer: About 6.28 m/s
Example: Find the banking angle for 20 m/s on a bend of radius 100 m. Take g = 10 m/s².
- tan θ = v²/(rg) = 400/(100 × 10).
- tan θ = 0.4.
- θ = tan⁻¹(0.4).
Answer: About 21.8°
Rotational motion
Rotation has a matching quantity for each quantity in straight-line motion. Torque plays the part of force: it is the force multiplied by its perpendicular distance from the axis, which is why a door handle sits far from the hinges. Moment of inertia plays the part of mass. It depends on the mass and on how far that mass lies from the axis: I = Σmr².
So a ring is harder to spin than a disc of the same mass and radius, because all its mass lies at the rim. A skater pulling the arms in reduces I. Since angular momentum L = Iω stays constant with no external torque, ω rises and the spin gets faster.
- τ = Fr, and τ = Iα
- L = Iω
- KE = ½Iω²
- Ring about its axis: I = MR²
- Disc about its axis: I = ½MR²
Example: A flywheel with I = 2 kg m² starts from rest under a torque of 10 N m. Find α, and also ω, L and KE after 4 s.
- α = τ/I = 10/2 = 5 rad/s².
- ω = αt = 5 × 4 = 20 rad/s.
- L = Iω = 2 × 20 = 40 kg m²/s.
- KE = ½Iω² = ½ × 2 × 400 = 400 J.
Answer: α = 5 rad/s², ω = 20 rad/s, L = 40 kg m²/s and KE = 400 J
Example: Find the moment of inertia about its axis of a disc of mass 4 kg and radius 0.5 m.
- I = ½MR².
- = ½ × 4 × 0.25.
Answer: 0.5 kg m²
A scalar has magnitude only, and a vector also has direction. Vectors combine by the triangle or parallelogram law. Newton’s laws connect force and motion: F = ma, and momentum is conserved when no external force acts, as in the recoil of a gun. In circular motion a centripetal force acts toward the centre, which is why roads are banked. Rotation has its own quantities: torque, angular momentum and moment of inertia.
- Equations of motion: v = u + at, s = ut + ½at², v² = u² + 2as.
- Impulse = force × time = change of momentum.
- v = rω links linear and angular speed.
- Banking: tan θ = v²/(rg).
- τ = Iα is the rotational form of F = ma.
Key formulas
- R² = A² + B² + 2AB cos θ
- F = ma
- F_c = mv²/r
- v = rω
- tan θ = v²/(rg)
- τ = Iα, L = Iω, KE = ½Iω²
Practice questions
Which is a vector?
- Speed
- Mass
- Velocity
- Time
Show the answer
Answer: C. Velocity It has direction.
The SI unit of momentum is
- kg m/s
- N/m
- J
- kg m/s²
Show the answer
Answer: A. kg m/s p = mv.
Recoil of a gun follows from
- energy conservation only
- momentum conservation
- gravity
- friction
Show the answer
Answer: B. momentum conservation Total momentum remains zero.
Centripetal force is directed
- along the tangent
- toward the centre
- away from the centre
- upward
Show the answer
Answer: B. toward the centre It keeps the body on the circle.
Roads are banked to
- reduce friction
- provide centripetal force
- increase mass
- drain water only
Show the answer
Answer: B. provide centripetal force The normal force supplies it.
The rotational analogue of mass is
- torque
- moment of inertia
- angular velocity
- radius
Show the answer
Answer: B. moment of inertia τ = Iα.
Theory questions
Define impulse and state its relation to momentum. (2 marks)
Show the model answer
Impulse is force × time of action. It equals the change of momentum of the body.
A 2 kg body moves at 3 m/s in a circle of radius 1.5 m. Find the centripetal force. (3 marks)
Show the model answer
F = mv²/r = 2 × 9/1.5 = 12 N.
State the law of conservation of linear momentum. A 5 kg gun fires a 50 g bullet at 200 m/s. Find the recoil velocity. (8 marks)
Show the model answer
With no external force, the total momentum is constant. 0 = 0.05 × 200 + 5V, so V = −2 m/s: the gun recoils at 2 m/s opposite to the bullet.
Work, power and energy
Topics: Work, power, kinetic and potential energy; work-energy theorem; conservation of energy.
Work and power
In physics, work is done only when a force causes movement in its own direction. W = Fs cos θ, where θ is the angle between the force and the displacement. Holding a heavy bag still does no work, and neither does carrying it level at a steady speed, because the lifting force is at 90° to the motion and cos 90° = 0. Friction does negative work, since it opposes the motion.
Power tells us how fast work is done. Two people climbing the same stairs do the same work if they have the same weight, but the quicker one develops more power. The bill for electricity counts energy in kilowatt-hours, which is a unit of energy and not of power.
- W = Fs cos θ, in joules
- P = W/t = Fv, in watts
- 1 horsepower = 746 W
- 1 kWh = 3.6 × 10⁶ J
Example: A 50 N force pulls a block 10 m along the floor, at 60° to the floor. Find the work done.
- W = Fs cos θ.
- = 50 × 10 × cos 60°.
- = 500 × 0.5.
Answer: 250 J
Example: A pump lifts 100 kg of water through 10 m in 20 s. Find the power in watts and horsepower, with g = 10 m/s².
- Work = mgh = 100 × 10 × 10 = 10000 J.
- P = 10000/20 = 500 W.
- In horsepower: 500/746.
Answer: 500 W, or about 0.67 hp
Example: A 2 kW heater runs for 3 hours. Find the energy in kWh and in joules.
- E = 2 × 3 = 6 kWh.
- In joules: 6 × 3.6 × 10⁶.
Answer: 6 kWh = 2.16 × 10⁷ J
Energy and its conservation
Energy is the ability to do work. Kinetic energy comes from motion and potential energy comes from position. KE depends on the square of the speed, so doubling a car’s speed gives it four times the energy, which is why braking distance grows so quickly.
The work-energy theorem says that the net work done on a body equals its change in KE. The law of conservation of energy says that energy cannot be created or destroyed, only changed from one form to another. As a body falls freely, its PE falls by just as much as its KE rises, so the total stays the same at every height. Friction does not destroy energy. It changes some into heat.
- KE = ½mv²
- PE = mgh
- Net work = ½mv² − ½mu²
- Free fall: mgh + ½mv² = constant
Example: A 2 kg body speeds up from 3 m/s to 5 m/s. Find the net work done on it.
- Initial KE = ½ × 2 × 9 = 9 J.
- Final KE = ½ × 2 × 25 = 25 J.
- Work = 25 − 9.
Answer: 16 J
Example: A 2 kg ball falls from rest from 10 m, with g = 10 m/s². Find PE, KE and speed when it is 5 m up, and the speed at the ground.
- Total energy = mgh = 2 × 10 × 10 = 200 J.
- At 5 m, PE = 2 × 10 × 5 = 100 J, so KE = 200 − 100 = 100 J.
- ½ × 2 × v² = 100, so v = 10 m/s.
- At the ground all 200 J is KE: v² = 200, so v ≈ 14.1 m/s.
Answer: PE = 100 J, KE = 100 J, 10 m/s, then about 14.1 m/s at the ground
Work is done when a force moves a body in its direction: W = Fs cos θ. Power is the rate of doing work. Kinetic energy comes from motion and potential energy from position. The work-energy theorem says that net work equals the change in kinetic energy. For a freely falling body, the total mechanical energy stays constant, with PE converted into KE.
- No work is done if the force is perpendicular to the displacement.
- 1 kWh = 3.6 × 10⁶ J.
- 1 horsepower = 746 W.
- Energy cannot be created or destroyed, only converted.
Key formulas
- W = Fs cos θ
- P = W/t = Fv
- KE = ½mv²
- PE = mgh
Practice questions
The SI unit of power is
- joule
- watt
- newton
- pascal
Show the answer
Answer: B. watt 1 W = 1 J/s.
KE of a 2 kg body at 3 m/s is
- 6 J
- 9 J
- 18 J
- 3 J
Show the answer
Answer: B. 9 J ½ × 2 × 9.
If speed doubles, KE becomes
- 2 times
- 4 times
- ½
- the same
Show the answer
Answer: B. 4 times KE ∝ v².
Work is zero when F and s are at
- 0°
- 45°
- 90°
- 180°
Show the answer
Answer: C. 90° cos 90° = 0.
1 horsepower is about
- 100 W
- 746 W
- 1000 W
- 500 W
Show the answer
Answer: B. 746 W Standard conversion.
Theory questions
State the work-energy theorem. (2 marks)
Show the model answer
The net work done on a body equals the change in its kinetic energy.
Show that the mechanical energy of a freely falling body is conserved. (8 marks)
Show the model answer
At height h from rest, total E = mgh. After falling x, v² = 2gx, KE = mgx and PE = mg(h − x), so the total is mgh. On reaching the ground, v² = 2gh and KE = mgh. The total is the same everywhere.
Gravity and gravitation
Topics: Newton’s law, g and G, variation of g, centre of gravity; escape and orbital velocity, satellites.
Newton’s law, G and g
Every two masses in the universe attract each other. The force is proportional to the product of the masses and inversely proportional to the square of the distance between their centres. G is a universal constant, 6.67 × 10⁻¹¹ N m²/kg², with the same value everywhere. It is so small that we notice gravity only when one of the masses is enormous, like the Earth.
Do not confuse G with g. The acceleration due to gravity, g, is what the force of the Earth gives to a falling body. A body of mass m on the surface has weight mg, and this equals GMm/R², so g = GM/R². It does not depend on the mass of the falling body, which is why all bodies fall at the same rate when air resistance is absent.
Mass is the amount of matter and is the same everywhere. Weight is a force and changes from place to place. The centre of gravity is the point where the whole weight seems to act, and the centre of mass is the point where the mass seems to be concentrated. They coincide when g is uniform across the body.
- F = Gm₁m₂/r²
- g = GM/R² ≈ 9.8 m/s²
- Weight W = mg
Example: Find the force between two 100 kg masses 1 m apart.
- F = Gm₁m₂/r².
- = 6.67 × 10⁻¹¹ × 100 × 100/1².
- = 6.67 × 10⁻¹¹ × 10⁴.
Answer: 6.67 × 10⁻⁷ N, which is far too small to feel
Example: Find g from M = 6 × 10²⁴ kg and R = 6.4 × 10⁶ m.
- g = GM/R².
- GM = 6.67 × 10⁻¹¹ × 6 × 10²⁴ = 4.0 × 10¹⁴.
- R² = 4.096 × 10¹³.
- g = 4.0 × 10¹⁴/4.096 × 10¹³.
Answer: About 9.8 m/s²
How g changes with height and depth
Going up increases the distance from the centre of the Earth, so g falls. For small heights, g_h ≈ g(1 − 2h/R). Going down also reduces g, but for another reason: only the part of the Earth below you pulls effectively. This gives g_d = g(1 − d/R), which falls in a straight line and reaches zero at the centre, where d = R.
So g is greatest at the surface. It also changes with latitude: it is a little smaller at the equator than at the poles, because the Earth bulges at the equator and its rotation reduces the effective value.
- Height: g_h ≈ g(1 − 2h/R), for h much less than R
- Depth: g_d = g(1 − d/R)
- At the centre: g = 0
Example: Find g at a height of 64 km, with R = 6400 km and g = 9.8 m/s².
- 2h/R = 2 × 64/6400 = 0.02.
- g_h = 9.8 × (1 − 0.02).
- = 9.8 × 0.98.
Answer: About 9.60 m/s²
Example: Find g at a depth of 1600 km.
- d/R = 1600/6400 = 0.25.
- g_d = 9.8 × (1 − 0.25).
- = 9.8 × 0.75.
Answer: 7.35 m/s²
Escape velocity and satellites
Throw a ball faster and it lands farther away. At a great enough speed, the ground curves away as fast as the ball falls, so it never lands: it is in orbit. For a low orbit this needs v₀ = √(gR), about 7.9 km/s. Gravity provides exactly the centripetal force, since mg = mv²/R.
At a still greater speed, the body leaves the Earth for good. This is the escape velocity. The starting KE must equal the work needed against gravity, which gives vₑ = √(2gR), about 11.2 km/s. It does not depend on the mass of the body. Note that vₑ = √2 v₀.
A geostationary satellite orbits above the equator, in the direction of the Earth’s spin, with a period of 24 hours. It seems to stay fixed over one place, at a height of about 36000 km, which suits communication and weather observation.
- v₀ = √(gR) ≈ 7.9 km/s
- vₑ = √(2gR) ≈ 11.2 km/s
- vₑ = √2 × v₀
Example: Find the escape and low-orbit speeds, with g = 9.8 m/s² and R = 6.4 × 10⁶ m.
- 2gR = 2 × 9.8 × 6.4 × 10⁶ = 1.2544 × 10⁸.
- vₑ = √(1.2544 × 10⁸) = 11200 m/s.
- v₀ = vₑ/√2 = 11200/1.414.
Answer: vₑ ≈ 11.2 km/s and v₀ ≈ 7.9 km/s
Every two masses attract with a force proportional to the product of the masses and inversely to the square of the distance. Near Earth this gives g, which falls with altitude and with depth. A satellite needs orbital speed v₀ = √(gR), and to leave Earth a body needs escape speed √2 times larger. A geostationary satellite orbits over the equator with a 24-hour period.
- G = 6.67 × 10⁻¹¹ N m²/kg² is universal; g varies by place.
- Mass is constant; weight = mg changes.
- g at the centre of the Earth is zero.
- The centre of gravity and centre of mass coincide in a uniform field.
Key formulas
- F = Gm₁m₂/r²
- g = GM/R²
- g_h ≈ g(1 − 2h/R)
- g_d = g(1 − d/R)
- vₑ = √(2gR)
- v₀ = √(gR)
Practice questions
The value of G is
- 9.8 m/s²
- 6.67 × 10⁻¹¹ N m²/kg²
- 3 × 10⁸ m/s
- 1.6 × 10⁻¹⁹
Show the answer
Answer: B. 6.67 × 10⁻¹¹ N m²/kg² Universal constant.
g at Earth’s centre is
- 9.8
- infinite
- zero
- 4.9
Show the answer
Answer: C. zero g_d = g(1 − d/R), with d = R.
The escape velocity from Earth is about
- 7.9 km/s
- 11.2 km/s
- 3 km/s
- 30 km/s
Show the answer
Answer: B. 11.2 km/s √(2gR).
The period of a geostationary satellite is
- 12 h
- 24 h
- 1 h
- 365 d
Show the answer
Answer: B. 24 h It matches Earth’s rotation.
Weight on going up from Earth’s surface
- increases
- decreases
- stays the same
- becomes zero at once
Show the answer
Answer: B. decreases g decreases with height.
Theory questions
Distinguish between G and g. (2 marks)
Show the model answer
G is the universal gravitational constant, the same everywhere. g is the acceleration due to gravity, which varies with place.
Derive the relation between g and G. (5 marks)
Show the model answer
A mass m on the surface has weight mg = GMm/R², so g = GM/R².
What is escape velocity? Compare it with orbital velocity near the Earth’s surface. (8 marks)
Show the model answer
Escape velocity is the least speed at which a body leaves Earth’s field: vₑ = √(2gR) ≈ 11.2 km/s. A close orbit needs v₀ = √(gR) ≈ 7.9 km/s, so vₑ = √2 v₀.
Electrostatics
Topics: Charge, Coulomb’s law, field, flux, Gauss’s law; potential; capacitors, combinations and dielectrics.
Charge, Coulomb’s law and the field
Rubbing a plastic comb moves electrons between the comb and the hair. A body with extra electrons is negative, and one short of electrons is positive. Charge is conserved, and it comes in whole numbers of the electronic charge, 1.6 × 10⁻¹⁹ C. Like charges repel and unlike charges attract.
Coulomb’s law gives the force between point charges: proportional to the product of the charges and inversely proportional to the square of the distance. Double the distance, and the force falls to a quarter. A medium with dielectric constant K reduces the force K times.
The electric field at a point is the force on a unit positive charge placed there. Lines of force show its direction. They start on positive charges, end on negative ones and never cross. They are closest where the field is strongest.
- F = kq₁q₂/r², with k = 9 × 10⁹ N m²/C²
- E = F/q = kq/r², in N/C
- Force on a charge: F = qE
Example: Charges of 1 μC and 2 μC are 10 cm apart. Find the force.
- F = 9 × 10⁹ × (1 × 10⁻⁶)(2 × 10⁻⁶)/(0.1)².
- Numerator: 9 × 10⁹ × 2 × 10⁻¹² = 0.018.
- F = 0.018/0.01.
Answer: 1.8 N, repelling
Example: Find the field 20 cm from a 4 nC charge.
- E = kq/r².
- = 9 × 10⁹ × 4 × 10⁻⁹/(0.2)².
- = 36/0.04.
Answer: 900 N/C
Flux and Gauss’s law
Electric flux measures how many field lines pass through a surface. Through a flat area A at angle θ to the field, it is Φ = EA cos θ. Gauss’s law says that the total flux through any closed surface equals the charge inside divided by ε₀. Charges outside add nothing to the total, since each line entering also leaves.
The law is useful when a charge arrangement has symmetry, such as a point charge, a long wire or a large sheet. Then the field can be found without long calculation.
- Φ = EA cos θ
- Φ = q/ε₀, for a closed surface
- ε₀ = 8.85 × 10⁻¹² C²/N m²
Example: A closed surface holds a charge of 8.85 nC. Find the total flux through it.
- Φ = q/ε₀.
- = 8.85 × 10⁻⁹/(8.85 × 10⁻¹²).
Answer: 1000 N m²/C
Electric potential
Potential at a point is the work done in bringing a unit positive charge from infinity to that point. It is a scalar, so potentials from several charges simply add. Positive charge moves naturally from higher potential to lower potential, just as water flows downhill. Potential difference is measured in volts, and 1 V = 1 J/C.
Field and potential are connected: the field is the rate at which potential falls with distance. Between two parallel plates, the field is uniform, and E = V/d.
- V = kq/r
- Work: W = qV
- E = −dV/dx; in a uniform field E = V/d
Example: Find the potential 20 cm from a 4 nC charge, and the work to bring a 2 μC charge there from far away.
- V = kq/r = 9 × 10⁹ × 4 × 10⁻⁹/0.2 = 180 V.
- W = qV = 2 × 10⁻⁶ × 180.
Answer: 180 V and 3.6 × 10⁻⁴ J
Capacitors
A capacitor stores charge on two conducting plates separated by an insulator. Connected to a battery, it charges until its voltage matches the battery. The charge is proportional to the voltage, and the constant is the capacitance, measured in farads. A farad is very large, so μF and pF are common.
Bigger plates and a smaller gap give a larger capacitance. A dielectric between the plates raises it K times. Capacitors in parallel share the voltage, and their capacitances add. In series they carry the same charge, and their reciprocals add, so the total is less than the smallest one. The stored energy is released quickly on discharge, as in a camera flash.
- C = Q/V
- C = Kε₀A/d
- Parallel: C = C₁ + C₂
- Series: 1/C = 1/C₁ + 1/C₂
- U = ½CV²
Example: Plates of area 0.1 m² are 1 mm apart with air between them. Find C, and then C with a dielectric of K = 5.
- C = ε₀A/d = 8.85 × 10⁻¹² × 0.1/10⁻³.
- = 8.85 × 10⁻¹⁰ F = 885 pF.
- With the dielectric: 5 × 885 pF.
Answer: 885 pF and 4425 pF
Example: 3 μF and 6 μF in series are connected to 12 V. Find the total capacitance, the charge and each voltage.
- 1/C = 1/3 + 1/6 = 1/2, so C = 2 μF.
- Q = CV = 2 × 12 = 24 μC on each.
- V₁ = 24/3 = 8 V and V₂ = 24/6 = 4 V, which add to 12 V.
Answer: 2 μF, 24 μC, 8 V and 4 V
Example: Find the energy in a 10 μF capacitor at 100 V.
- U = ½CV².
- = ½ × 10⁻⁵ × 100².
- = ½ × 10⁻⁵ × 10⁴.
Answer: 0.05 J
Charge comes from an excess or shortage of electrons. Coulomb’s law gives the force between charges, and the electric field is the force per unit positive charge. Potential is work per unit charge. A capacitor stores charge, and its capacitance depends on plate area, separation and the dielectric between the plates. Capacitors in parallel add directly, and in series their reciprocals add.
- Field lines start on positive and end on negative charges and never cross.
- A dielectric of constant K multiplies capacitance by K.
- Gauss’s law links flux through a closed surface to the charge inside.
- E = −dV/dx links field and potential.
Key formulas
- F = kq₁q₂/r², k = 9 × 10⁹
- E = F/q = kq/r²
- V = kq/r
- C = Q/V
- C = Kε₀A/d
- C_p = C₁ + C₂
- 1/C_s = 1/C₁ + 1/C₂
- U = ½CV²
Practice questions
The SI unit of charge is
- ampere
- coulomb
- volt
- farad
Show the answer
Answer: B. coulomb Definition.
If distance doubles, Coulomb force becomes
- double
- half
- one quarter
- four times
Show the answer
Answer: C. one quarter Inverse square law.
Capacitance is measured in
- henry
- farad
- ohm
- tesla
Show the answer
Answer: B. farad C = Q/V.
A dielectric makes capacitance
- fall
- rise
- zero
- unchanged
Show the answer
Answer: B. rise C ∝ K.
Two 6 μF capacitors in series give
- 12 μF
- 6 μF
- 3 μF
- 36 μF
Show the answer
Answer: C. 3 μF 1/C = 1/6 + 1/6.
Electric field lines
- cross each other
- form loops in electrostatics
- start on + and end on −
- are always circular
Show the answer
Answer: C. start on + and end on − Property.
Theory questions
State Coulomb’s law. (2 marks)
Show the model answer
The force between two point charges is proportional to the product of the charges and inversely to the square of the distance between them.
Find the equivalent of 2 μF and 3 μF in series, and in parallel. (3 marks)
Show the model answer
Series: 6/5 = 1.2 μF. Parallel: 5 μF.
Derive the relation for capacitors in series and find the charge on each when 3 μF and 6 μF in series are connected to 12 V. (8 marks)
Show the model answer
In series the charge is the same and V = V₁ + V₂ = Q/C₁ + Q/C₂, so 1/C = 1/C₁ + 1/C₂. Here C = 2 μF and Q = CV = 24 μC on each.
Current electricity
Topics: Emf and potential difference; cells and grouping; Ohm’s law, resistivity; Kirchhoff’s laws, Wheatstone bridge; Joule heating, power.
Current, Ohm’s law and resistance
Current is the rate of flow of charge. Metals conduct because they have free electrons that drift when a potential difference is applied. Conventional current is taken from positive to negative, which is opposite to the electrons’ movement. One ampere means one coulomb passing every second.
Ohm’s law says that the current in a conductor is proportional to the potential difference across it, as long as temperature and other conditions stay the same. The ratio V/I is the resistance. It depends on the length, the area and the material: a long, thin wire resists more. Resistivity ρ is a property of the material. In metals, resistance rises with temperature, because the atoms vibrate more and obstruct the electrons.
- I = q/t
- V = IR
- R = ρL/A
- R_t = R₀(1 + αt)
- Series: R = R₁ + R₂ + …
- Parallel: 1/R = 1/R₁ + 1/R₂ + …
Example: Find the resistance of a copper wire 100 m long with an area of 1 mm², where ρ = 1.7 × 10⁻⁸ Ω m.
- A = 10⁻⁶ m².
- R = ρL/A = 1.7 × 10⁻⁸ × 100/10⁻⁶.
Answer: 1.7 Ω
Example: A coil has 10 Ω at 0 °C and α = 0.004 per °C. Find its resistance at 100 °C.
- R = R₀(1 + αt).
- = 10 × (1 + 0.004 × 100).
- = 10 × 1.4.
Answer: 14 Ω
Example: 2 Ω, 3 Ω and 6 Ω in parallel are in series with 4 Ω, across 10 V. Find the current from the source.
- Parallel part: 1/R = 1/2 + 1/3 + 1/6 = 1, so R = 1 Ω.
- Total: 1 + 4 = 5 Ω.
- I = 10/5.
Answer: 2 A
Cells, emf and internal resistance
A cell turns chemical energy into electrical energy. Its emf is the energy it gives to each coulomb, measured when no current flows. When current does flow, some voltage is lost inside the cell because of its internal resistance, so the terminal voltage is less than the emf.
Cells in series add their emfs, which suits a load that needs a higher voltage. Equal cells in parallel keep the same emf, but their internal resistance falls, which suits a load that needs a larger current. A primary cell, such as a dry cell, cannot be recharged. A secondary cell, such as a lead-acid battery, can be.
- I = E/(R + r)
- V = E − Ir
- n in series: I = nE/(R + nr)
- n equal in parallel: I = E/(R + r/n)
Example: A 12 V cell with r = 1 Ω feeds a 5 Ω resistor. Find the current and terminal voltage.
- I = E/(R + r) = 12/6 = 2 A.
- V = E − Ir = 12 − 2 × 1.
Answer: 2 A and 10 V
Example: Six 1.5 V cells, each with r = 0.5 Ω, are in series with a 6 Ω load. Find the current.
- Total emf = 6 × 1.5 = 9 V.
- Total internal resistance = 6 × 0.5 = 3 Ω.
- I = 9/(6 + 3).
Answer: 1 A
Example: Three 1.5 V cells, each with r = 0.6 Ω, are in parallel with a 2.8 Ω load. Find the current.
- The emf stays 1.5 V.
- r/n = 0.6/3 = 0.2 Ω.
- I = 1.5/(2.8 + 0.2).
Answer: 0.5 A
Kirchhoff’s laws and the Wheatstone bridge
Kirchhoff’s current law says the currents entering a junction equal the currents leaving it, because charge does not pile up anywhere. His voltage law says that around any closed loop, the sum of the emfs equals the sum of the IR drops, because energy is conserved. Take a direction for each current. If the answer is negative, the current runs the opposite way.
The Wheatstone bridge has four resistors with a galvanometer across the middle. Adjust one resistor until the galvanometer reads zero. Then the two midpoints are at the same potential, and the ratio of the resistors on one side equals that on the other. This allows an unknown resistance to be measured very accurately, without knowing the current or the supply voltage.
- ΣI = 0 at a junction
- ΣE = ΣIR around a loop
- Balance: P/Q = R/S
Example: A 12 V and a 9 V cell push currents I₁ and I₂ through separate 2 Ω resistors, and the two currents join to flow through a shared 2 Ω resistor. Find the currents.
- The shared resistor carries I₁ + I₂.
- Loop 1: 12 = 2I₁ + 2(I₁ + I₂), so 2I₁ + I₂ = 6.
- Loop 2: 9 = 2I₂ + 2(I₁ + I₂), so 2I₁ + 4I₂ = 9.
- Subtract: 3I₂ = 3, so I₂ = 1 A.
- Then 2I₁ = 5, so I₁ = 2.5 A. Check loop 1: 5 + 7 = 12.
Answer: I₁ = 2.5 A, I₂ = 1 A, and 3.5 A through the shared resistor
Example: A bridge balances with P = 10 Ω, Q = 20 Ω and R = 30 Ω. Find S.
- P/Q = R/S.
- 10/20 = 30/S.
- S = 30 × 20/10.
Answer: 60 Ω
Heating and electric power
A current in a resistor produces heat, because moving electrons give energy to the atoms. Joule’s law says this heat is proportional to the square of the current, the resistance and the time. Electric power is the rate of energy use. A 100 W lamp on 220 V has a definite resistance, found from P = V²/R.
- H = I²Rt
- P = VI = I²R = V²/R
- 1 kWh = 1 unit
Example: A lamp is rated 100 W, 220 V. Find its current and resistance.
- I = P/V = 100/220 ≈ 0.45 A.
- R = V²/P = 48400/100.
Answer: About 0.45 A and 484 Ω
Current is the rate of flow of charge, driven by a potential difference. Ohm’s law says V = IR at a constant temperature. Resistance depends on length, area and material, and usually rises with temperature in metals. Kirchhoff’s laws solve networks: the current law expresses charge conservation and the voltage law expresses energy conservation. A cell’s emf exceeds its terminal voltage because of internal resistance, and the balanced Wheatstone bridge finds an unknown resistance.
- Series: R = R₁ + R₂; parallel: 1/R = 1/R₁ + 1/R₂.
- Bridge balance: P/Q = R/S.
- Cells in series add emf; cells in parallel add capacity at the same emf.
- A primary cell cannot be recharged; a secondary cell can.
- Joule’s law: heat H = I²Rt.
Key formulas
- V = IR
- R = ρL/A
- R_t = R₀(1 + αt)
- I = E/(R + r)
- P = VI = I²R
- H = I²Rt
Practice questions
The SI unit of resistance is
- volt
- ampere
- ohm
- watt
Show the answer
Answer: C. ohm R = V/I.
Doubling a wire’s length makes its resistance
- half
- double
- four times
- the same
Show the answer
Answer: B. double R ∝ L.
Kirchhoff’s current law is based on conservation of
- energy
- charge
- momentum
- mass
Show the answer
Answer: B. charge Nothing accumulates at a node.
Two 4 Ω resistors in parallel give
- 8 Ω
- 4 Ω
- 2 Ω
- 1 Ω
Show the answer
Answer: C. 2 Ω 4/2.
A dry cell is a
- secondary cell
- primary cell
- fuel cell
- solar cell
Show the answer
Answer: B. primary cell Not rechargeable.
Power in a 10 Ω resistor with 2 A is
- 20 W
- 40 W
- 5 W
- 200 W
Show the answer
Answer: B. 40 W I²R.
Theory questions
Distinguish between emf and potential difference. (3 marks)
Show the model answer
Emf is the energy per unit charge given by a source, measured when no current flows. Potential difference is the energy per unit charge used between two points. V = E − Ir.
A 12 V cell with r = 1 Ω feeds a 5 Ω resistor. Find the current and terminal voltage. (3 marks)
Show the model answer
I = 12/6 = 2 A. V = E − Ir = 10 V.
State Kirchhoff’s laws and derive the balance condition of a Wheatstone bridge. (8 marks)
Show the model answer
KCL: the sum of currents at a junction is zero. KVL: the sum of emfs and voltage drops round a loop is zero. With no galvanometer current, I₁ flows through P and Q and I₂ through R and S. The midpoints are at equal potential, so I₁P = I₂R and I₁Q = I₂S. Dividing gives P/Q = R/S.
Electromagnetism
Topics: Magnetic field; Biot-Savart; force on charges and conductors; Faraday’s and Lenz’s laws, induction; transformer and long-distance transmission.
The magnetic effect of current
Oersted found that a current deflects a compass, so a current produces a magnetic field. Around a straight wire, the field lines are circles. The right-hand thumb rule gives the direction: point the thumb along the current, and the fingers curl in the direction of the field. Winding the wire into a coil strengthens the field.
- Straight wire: B = μ₀I/(2πr)
- Centre of a coil: B = μ₀NI/(2r)
- μ₀ = 4π × 10⁻⁷ T m/A
Example: Find the field 5 cm from a long wire carrying 10 A.
- B = μ₀I/(2πr) = (4π × 10⁻⁷ × 10)/(2π × 0.05).
- This simplifies to 2 × 10⁻⁷ × 10/0.05.
Answer: 4 × 10⁻⁵ T
Example: A coil of 100 turns and radius 10 cm carries 1 A. Find the field at its centre.
- B = μ₀NI/(2r).
- = 4π × 10⁻⁷ × 100 × 1/(2 × 0.1).
- = 2π × 10⁻⁴.
Answer: About 6.28 × 10⁻⁴ T
Biot-Savart law
The Biot-Savart law gives the field from a small piece of a current-carrying wire. It depends on the current and the piece’s length, and it falls with the square of the distance. It also depends on the sine of the angle between the piece and the line to the point. Adding up all the pieces of a wire gives the formulas for a long straight wire and for a circular coil.
- dB = (μ₀/4π) I dl sin θ/r²
Force on a charge and on a conductor
A charge moving in a magnetic field feels a force at right angles to both its velocity and the field. Because this force is sideways, it changes the direction and not the speed. A current is many moving charges, so a wire carrying current also feels a force. This is how an electric motor works.
Fleming’s left-hand rule gives the direction. Hold the thumb, first finger and second finger at right angles. The first finger points along the field, the second along the current, and the thumb gives the motion. Two parallel wires with current in the same direction attract each other, and with opposite currents they repel.
- F = qvB sin θ
- F = BIL sin θ
- Parallel wires: F/L = μ₀I₁I₂/(2πd)
Example: An electron at 10⁶ m/s moves at right angles to a 0.5 T field. Find the force.
- F = qvB sin 90°.
- = 1.6 × 10⁻¹⁹ × 10⁶ × 0.5.
Answer: 8 × 10⁻¹⁴ N
Example: A 20 cm wire carrying 4 A lies at right angles to a 0.5 T field. Find the force.
- F = BIL.
- = 0.5 × 4 × 0.2.
Answer: 0.4 N
Example: Parallel wires 10 cm apart carry 10 A and 20 A in the same direction. Find the force per metre.
- F/L = 2 × 10⁻⁷ × I₁I₂/d.
- = 2 × 10⁻⁷ × 200/0.1.
Answer: 4 × 10⁻⁴ N/m, attracting
Electromagnetic induction
Faraday found the reverse effect: a changing magnetic flux through a coil produces an emf, and the emf lasts only while the flux is changing. Move a magnet toward a coil and the meter deflects. Hold it still and the reading drops to zero. Move it away and the meter deflects the other way. The faster the change and the more turns in the coil, the larger the emf.
Lenz’s law gives the direction: the induced current opposes the change that causes it. Push a north pole in, and the coil’s near face becomes north and pushes back. So you must do work against it, and this work becomes electrical energy. This is why Lenz’s law is a form of energy conservation. For a wire moving through a field, Fleming’s right-hand rule gives the direction of the current.
- Φ = BA cos θ, in weber
- e = −N dΦ/dt
- Moving wire: e = BLv
Example: The flux through a coil of 100 turns changes by 0.02 Wb in 0.1 s. Find the emf.
- e = N ΔΦ/Δt.
- = 100 × 0.02/0.1.
Answer: 20 V
Example: A 20 cm wire moves at 10 m/s at right angles to a 0.5 T field. Find the emf.
- e = BLv.
- = 0.5 × 0.2 × 10.
Answer: 1 V
Transformers and long-distance transmission
A transformer has two coils on an iron core. Alternating current in the primary creates a changing flux in the core, and this flux induces an emf in the secondary. It works only with AC, since a steady DC gives no change in flux. A step-up transformer has more secondary turns, and a step-down one has fewer. If the voltage goes up, the current comes down, because power cannot increase.
Real transformers have copper losses in the windings, eddy-current and hysteresis losses in the core, and some flux leakage. A laminated soft iron core reduces the core losses.
Power stations send electricity at very high voltage. For a given power, a higher voltage means a smaller current, and the heat lost in the lines is I²R. Ten times the voltage gives a tenth of the current and only a hundredth of the loss. Transformers near homes then step it down to a safe voltage.
- V₂/V₁ = N₂/N₁
- Ideal: V₁I₁ = V₂I₂
- η = output power/input power
- Line loss = I²R
Example: A transformer has 200 primary and 1000 secondary turns, with 230 V input. Find the output voltage, and the primary current if the secondary gives 1 A (ideal).
- V₂ = 230 × 1000/200 = 1150 V.
- V₁I₁ = V₂I₂, so I₁ = 1150 × 1/230.
Answer: 1150 V and 5 A
Example: 100 kW is sent through a line of 1 Ω. Compare the loss at 1 kV and at 10 kV.
- At 1 kV: I = 100000/1000 = 100 A, and the loss = 100² × 1 = 10 kW.
- At 10 kV: I = 10 A, and the loss = 10² × 1 = 100 W.
Answer: 10 kW against 0.1 kW: a hundred times less
A current produces a magnetic field whose direction follows the right-hand thumb rule. A charge moving in a field feels a force, and a current-carrying conductor feels a force given by Fleming’s left-hand rule. Faraday’s law says a changing flux induces an emf, and Lenz’s law says it opposes the change. A transformer uses mutual induction to change AC voltage, which lets power travel long distances with low losses.
- Parallel currents in the same direction attract each other.
- Fleming’s right-hand rule gives induced current direction.
- A transformer works only on AC.
- High-voltage transmission means low current and low I²R loss.
- Losses: copper, iron (eddy, hysteresis), flux leakage.
Key formulas
- F = qvB sin θ
- F = BIL sin θ
- e = −N dΦ/dt
- B = μ₀I/(2πr)
- V₂/V₁ = N₂/N₁ = I₁/I₂
Practice questions
Lenz’s law is based on conservation of
- charge
- energy
- mass
- momentum
Show the answer
Answer: B. energy The induced effect opposes the cause.
A transformer works on
- DC
- AC
- both equally
- batteries
Show the answer
Answer: B. AC It needs changing flux.
Fleming’s left-hand rule gives
- induced emf
- the force on a conductor
- resistance
- capacitance
Show the answer
Answer: B. the force on a conductor Motor rule.
A step-up transformer has
- N₂ > N₁
- N₂ < N₁
- N₂ = N₁
- no core
Show the answer
Answer: A. N₂ > N₁ More turns on the secondary.
Long-distance power is sent at
- low voltage
- high voltage
- zero current
- DC only
Show the answer
Answer: B. high voltage Reduces I²R loss.
The unit of magnetic field is
- weber
- tesla
- henry
- farad
Show the answer
Answer: B. tesla B in tesla.
Theory questions
State Faraday’s laws of electromagnetic induction. (3 marks)
Show the model answer
A changing flux linked with a coil induces an emf, which lasts as long as the change does. Its magnitude is proportional to the rate of change of flux linkage.
A transformer has 200 primary and 1000 secondary turns. With 230 V input, find the output voltage. (3 marks)
Show the model answer
V₂ = 230 × 1000/200 = 1150 V.
Explain the principle and losses of a transformer and why AC power is transmitted at high voltage. (8 marks)
Show the model answer
An alternating primary current sets up a changing flux in the core, which induces an emf in the secondary by mutual induction. Losses: copper, eddy current, hysteresis and flux leakage. For a given power P = VI, higher V means lower I, so the I²R line loss falls greatly.
Electronics and semiconductors
Topics: Energy bands; intrinsic and extrinsic types; P-N diode, rectifiers, LED; PNP and NPN transistors (idea only).
Energy bands and doping
Electrons in a solid occupy bands of allowed energy. The valence band holds the bound electrons, and the conduction band holds those free to move. Between them may be a forbidden gap. In a conductor, these bands overlap, so plenty of electrons are free. In an insulator the gap is wide, about 5 eV or more. In a semiconductor it is small, about 1 eV, and heat can lift some electrons across. That is why a semiconductor’s resistance falls as temperature rises, unlike a metal’s.
Pure silicon or germanium is intrinsic, with equal numbers of electrons and holes. A hole is the vacancy left when an electron moves away, and it behaves like a positive charge. Adding a tiny amount of impurity is called doping. A pentavalent atom such as phosphorus or arsenic donates an extra electron, giving N-type material. A trivalent atom such as boron or aluminium leaves a hole, giving P-type material. Both types are still electrically neutral overall.
- Conductor: bands overlap
- Semiconductor: gap about 1 eV (Si 1.1 eV, Ge 0.7 eV)
- Insulator: gap of about 5 eV or more
- N-type: majority electrons
- P-type: majority holes
The P-N junction and rectifiers
Where P-type and N-type material meet, electrons and holes cross and cancel out near the junction. This leaves a thin depletion layer with a built-in barrier. In forward bias, with P connected to the positive terminal, the barrier falls and current flows once about 0.7 V is reached in silicon. In reverse bias the barrier rises, and almost no current flows. So a diode acts as a one-way valve.
A rectifier uses this to change AC into DC. A half-wave rectifier uses one diode and passes only one half of each cycle. A full-wave bridge uses four diodes, so both halves drive current the same way through the load. Its output has twice the frequency of the input and is easier to smooth with a capacitor filter.
A light emitting diode gives out light when forward biased, because electrons lose energy as they cross the junction. An LED needs a series resistor to limit its current.
- Half wave: V_dc = V_m/π, greatest efficiency ≈ 40.6%
- Full wave: V_dc = 2V_m/π, greatest efficiency ≈ 81.2%
- Ripple frequency: f for half wave, 2f for full wave
Example: A silicon diode and a 1 kΩ resistor are in series with a 5 V supply. Find the current, taking a 0.7 V drop across the diode.
- The voltage across the resistor = 5 − 0.7 = 4.3 V.
- I = 4.3/1000.
Answer: 4.3 mA
Example: An LED that drops 2 V and needs 20 mA runs from 9 V. Find the series resistor.
- The voltage across the resistor = 9 − 2 = 7 V.
- R = 7/0.02.
Answer: 350 Ω
Example: A peak voltage of 20 V is rectified. Find the DC output in half-wave and in full-wave.
- Half-wave: 20/π ≈ 6.37 V.
- Full-wave: 2 × 20/π ≈ 12.7 V.
Answer: About 6.4 V and 12.7 V
Transistors: the idea
A transistor has three layers, either NPN or PNP. The layers are the emitter, base and collector. The base is thin and lightly doped. With the emitter junction forward biased and the collector junction reverse biased, most carriers from the emitter pass through the base to the collector. So a small base current controls a much larger collector current, which allows the device to amplify or switch.
- I_E = I_B + I_C
- Current gain: β = I_C/I_B
Example: A transistor has β = 100 and a base current of 20 μA. Find the collector and emitter currents.
- I_C = βI_B = 100 × 20 μA = 2000 μA = 2 mA.
- I_E = 2 mA + 0.02 mA.
Answer: I_C = 2 mA and I_E = 2.02 mA
Energy bands explain conduction. Conductors have overlapping bands, insulators have a wide gap, and semiconductors have a small one. Doping creates N-type material (extra electrons) or P-type material (holes). A P-N junction conducts in forward bias and blocks in reverse bias, so it can rectify AC to DC. A transistor is a three-layer device, in PNP or NPN form. An LED gives out light in forward bias.
- Pure silicon or germanium is intrinsic; doped material is extrinsic.
- Pentavalent dopant (P, As) gives N-type; trivalent dopant (B, Al) gives P-type.
- A half-wave rectifier uses one diode; a bridge uses four.
- The resistance of a semiconductor falls as temperature rises.
Key formulas
- η_half-wave max ≈ 40.6%
- η_full-wave max ≈ 81.2%
- f_ripple(full) = 2f
Practice questions
Doping silicon with phosphorus gives
- P-type
- N-type
- an insulator
- a metal
Show the answer
Answer: B. N-type An extra electron.
In forward bias a diode has
- high resistance
- low resistance
- no current ever
- infinite voltage
Show the answer
Answer: B. low resistance It conducts.
A bridge rectifier uses
- 1 diode
- 2 diodes
- 4 diodes
- 8 diodes
Show the answer
Answer: C. 4 diodes Standard circuit.
The band gap is largest in
- conductors
- semiconductors
- insulators
- all equal
Show the answer
Answer: C. insulators Electrons cannot cross it.
Majority carriers in P-type are
- electrons
- holes
- ions
- protons
Show the answer
Answer: B. holes Trivalent doping.
LED stands for
- light emitting diode
- low energy device
- linear electronic diode
- light electric device
Show the answer
Answer: A. light emitting diode Definition.
Theory questions
Distinguish between intrinsic and extrinsic semiconductors. (2 marks)
Show the model answer
An intrinsic semiconductor is pure, with equal electrons and holes. An extrinsic one is doped, so one type of carrier dominates.
Explain conductors, semiconductors and insulators using energy bands. (5 marks)
Show the model answer
Conductors: valence and conduction bands overlap. Semiconductors: a small gap of about 1 eV is crossed by heat. Insulators: a large gap of about 5 eV or more stops conduction.
With a diagram, explain the working of a full-wave bridge rectifier. (8 marks)
Show the model answer
Four diodes form a bridge. In the positive half-cycle two opposite diodes conduct and current flows through the load in one direction. In the negative half-cycle the other two conduct and current through the load has the same direction. The output is pulsating DC at twice the input frequency, which a filter smooths.
Chapters follow the SCTE Assam syllabus. The notes and questions were written for this studio and are not official.