IITIAN1997 STUDIO

Safety in Chemical Engineering

Learn from accidents. Design them out.

Open the interactive studio →

Accident case studies, PPE, toxicology and TLVs, fire and explosion, relief, HAZOP, fault trees, dispersion and nuclear safety from the ASTU CHE1818PE42 syllabus.

What is inside

  • Bhopal, Flixborough and other lessons
  • TLV, TWA and toxic exposure
  • Flammability limits, TNT equivalence and relief
  • HAZOP, reliability and gas dispersion

Syllabus: ASTU CHE1818PE42 Safety in Chemical Industry, semester 8, 2018 scheme (programme elective). Official syllabus PDF.

Review of industrial accidents

Topics: Bhopal (1984), Flixborough (1974), Seveso (1976), Piper Alpha (1988), Texas City (2005), Vizag LG Polymers (2020), Jaipur IOC (2009); causes, consequences and lessons; accident statistics: FAR, OSHA incidence rate, fatality rate.

Major accidents share causes: unsafe changes made without review (Flixborough’s temporary bypass pipe), disabled safety systems and poor maintenance (Bhopal’s MIC release, ~3800 immediate deaths), inadequate siting near populations, and weak emergency planning. Safety performance is measured by the OSHA incidence rate = injuries × 200 000/hours worked, and the fatal accident rate FAR = deaths per 10⁸ working hours.

  • Flixborough: cyclohexane leak through a temporary bypass; 28 dead; lesson: management of change.
  • Bhopal: water entered an MIC tank; refrigeration, scrubber and flare were not working; lesson: inherent safety, minimise inventory.
  • Seveso: dioxin release; led to EU Seveso directives.
  • Heinrich’s pyramid: many near-misses for each serious injury.

Key formulas

  • OSHA incidence rate = N × 200 000/total hours
  • FAR = deaths × 10⁸/total hours
  • Deaths/person/year = FAR × hours per year/10⁸

Practice questions

The chemical released at Bhopal was

  1. chlorine
  2. methyl isocyanate
  3. ammonia
  4. phosgene
Show the answer

Answer: B. methyl isocyanate MIC.

FAR is based on

  1. 10⁶ hours
  2. 10⁸ hours
  3. 200 000 hours
  4. 1 year
Show the answer

Answer: B. 10⁸ hours Deaths per 10⁸ working hours.

Flixborough taught the importance of

  1. management of change
  2. colour coding
  3. noise control
  4. lighting
Show the answer

Answer: A. management of change Unreviewed modification.

OSHA incidence rate uses a base of

  1. 1000 h
  2. 200 000 h
  3. 10⁸ h
  4. 1 year
Show the answer

Answer: B. 200 000 h 100 workers × 2000 h.

Theory questions

A plant of 500 workers (2000 h/year each) had 6 recordable injuries. Find the OSHA incidence rate. (3 marks)

Show the model answer

Hours = 10⁶. Rate = 6 × 200 000/10⁶ = 1.2 per 100 worker-years.

Describe the Bhopal disaster, its causes and lessons. (5 marks)

Show the model answer

December 1984, Union Carbide Bhopal: water entered MIC tank E610, an exothermic reaction raised pressure, ~40 t MIC escaped. Causes: large MIC inventory, refrigeration off, scrubber and flare not working, poor maintenance, plant near dense housing, no emergency plan. Lessons: inherent safety (reduce hazardous inventory), keep safeguards working, siting, community emergency planning.

Laboratory safety and personal protective equipment

Topics: Safe laboratory practice; storage and labelling of chemicals; MSDS/SDS; GHS pictograms; fume hoods; handling of gas cylinders; personal protective equipment for eyes, face, hands, body, respiratory and hearing protection; selection and maintenance.

Safety starts with the hierarchy of controls: elimination, substitution, engineering controls (fume hoods, ventilation), administrative controls (procedures, training, permits) and only then PPE. SDS documents (16 sections) give hazards, first aid, PPE and spill response. GHS pictograms flag flammables, toxics, corrosives and oxidisers. Incompatible chemicals are stored apart (acids from bases, oxidisers from flammables). Respirators must match the contaminant and its concentration (assigned protection factor).

  • PPE is the last line of defence.
  • Fume-hood face velocity ≈ 0.4–0.5 m/s.
  • Cylinders: chained upright, cap on, away from heat; oxygen apart from fuel gases.
  • Max use concentration = APF × exposure limit.

Key formulas

  • Max use concentration = APF × TLV
  • Noise dose D = Σ C_i/T_i (≤ 1)

Practice questions

The most effective control is

  1. PPE
  2. elimination
  3. training
  4. signage
Show the answer

Answer: B. elimination Top of the hierarchy.

An SDS has how many sections?

  1. 8
  2. 12
  3. 16
  4. 20
Show the answer

Answer: C. 16 GHS format.

A half-mask respirator with APF 10 used for a gas with TLV 5 ppm is good up to

  1. 5 ppm
  2. 50 ppm
  3. 500 ppm
  4. 0.5 ppm
Show the answer

Answer: B. 50 ppm 10 × 5.

Oxidisers should be stored away from

  1. water
  2. flammables
  3. labels
  4. shelves
Show the answer

Answer: B. flammables Fire risk.

Theory questions

A worker is exposed to 90 dB for 4 h and 95 dB for 2 h; permitted times are 8 h and 4 h. Find the noise dose. (3 marks)

Show the model answer

D = 4/8 + 2/4 = 1.0 = 100 %: at the limit; reduce exposure or use hearing protection.

Explain the hierarchy of hazard controls with examples. (4 marks)

Show the model answer

Elimination (remove a step), substitution (toluene for benzene), engineering (enclosure, local exhaust), administrative (permits, rotation, training), PPE (goggles, gloves, respirators). Higher levels act on the hazard itself and do not depend on behaviour.

Toxic substances and industrial hygiene

Topics: Toxicology: routes of entry, dose–response, LD₅₀ and LC₅₀; threshold limit values (TWA, STEL, ceiling); exposure evaluation; mixtures; ventilation for dilution; industrial hygiene: anticipation, identification, evaluation, control.

Toxicants enter by inhalation (most important in industry), skin, ingestion and injection. Dose–response curves give LD₅₀ (dose killing half the test population). Workplace limits: TLV–TWA (8-hour average), STEL (15-minute) and ceiling. The 8-hour TWA = Σ C_i t_i/8. For several chemicals with similar effects, Σ C_i/TLV_i ≤ 1. Dilution ventilation needs Q = (Q_m K/(C_ppm)) scaled for vapour: Q_v = 10⁶ R T Q_m K/(M P C).

  • Lower TLV means more toxic.
  • Mixture rule: Σ C/TLV ≤ 1.
  • Mixing factor K = 1 (perfect) to 10 (poor).
  • Industrial hygiene: anticipate, identify, evaluate, control.

Key formulas

  • TWA = (1/8) Σ C_i t_i
  • Σ C_i/TLV_i ≤ 1
  • TLV_mix = 1/Σ(f_i/TLV_i)
  • Q_v = 10⁶ R T Q_m K/(M P C_ppm)

Practice questions

TLV–TWA is averaged over

  1. 15 min
  2. 1 h
  3. 8 h
  4. 24 h
Show the answer

Answer: C. 8 h Working day.

LD₅₀ is the dose that kills

  1. all
  2. half
  3. none
  4. 10 %
Show the answer

Answer: B. half Median lethal dose.

For a mixture, exposure is acceptable when Σ C/TLV is

  1. ≤ 1
  2. ≥ 1
  3. = 0
  4. ≤ 10
Show the answer

Answer: A. ≤ 1 Additive effects.

The most common route of entry in industry is

  1. ingestion
  2. inhalation
  3. injection
  4. eyes
Show the answer

Answer: B. inhalation Breathing vapours and dusts.

Theory questions

A worker is exposed to toluene (TLV 20 ppm) at 30 ppm for 2 h, 10 ppm for 4 h and 0 for 2 h. Is the TWA exceeded? (3 marks)

Show the model answer

TWA = (30 × 2 + 10 × 4)/8 = 12.5 ppm < 20 ppm: within the limit.

Air contains acetone 300 ppm (TLV 250) and MEK 50 ppm (TLV 200). Is it safe? (3 marks)

Show the model answer

300/250 + 50/200 = 1.2 + 0.25 = 1.45 > 1: unsafe, controls needed.

Fire and explosion

Topics: Fire triangle and tetrahedron; flash point, fire point, autoignition temperature; flammability limits (LFL/UFL), Le Chatelier’s rule, limiting oxygen concentration; classes of fire and extinguishers; explosions: deflagration and detonation, BLEVE, UVCE, dust explosions; TNT equivalence; inerting and venting.

Fire needs fuel, oxygen and ignition (plus the chain reaction). A vapour burns only between its lower and upper flammability limits; for mixtures Le Chatelier gives LFL_mix = 1/Σ(y_i/LFL_i) (y_i fuel-only fractions). The limiting oxygen concentration LOC ≈ LFL × stoichiometric O₂ moles sets the inerting target. Explosion energy is often expressed as TNT equivalent (4686 kJ/kg); overpressure is read from the scaled distance Z = R/m_TNT^(1/3). Prevention: inerting, ventilation, removing ignition sources (grounding, bonding), relief and flame arresters.

  • Flash point < 37.8 °C: flammable liquid (NFPA).
  • Fire classes: A solids, B liquids, C gases (India) / electrical (US), D metals.
  • BLEVE: a pressurised liquefied gas vessel fails in fire.
  • Dust explosion pentagon: fuel, O₂, ignition, dispersion, confinement.

Key formulas

  • LFL_mix = 1/Σ(y_i/LFL_i)
  • LOC = LFL × z (moles O₂ per mole fuel)
  • LFL ≈ 0.55 C_st (Jones)
  • m_TNT = η m ΔH_c/4686
  • Z = R/m_TNT^(1/3)

Practice questions

A mixture below its LFL

  1. burns violently
  2. is too lean to burn
  3. is too rich to burn
  4. detonates
Show the answer

Answer: B. is too lean to burn Not enough fuel.

The LOC for methane (LFL 5 %, CH₄ + 2O₂) is about

  1. 5 %
  2. 10 %
  3. 21 %
  4. 2 %
Show the answer

Answer: B. 10 % 5 × 2.

A BLEVE involves

  1. a liquefied gas vessel failing
  2. dust only
  3. water hammer
  4. cold liquids only
Show the answer

Answer: A. a liquefied gas vessel failing Boiling liquid expanding vapour explosion.

Class B fires involve

  1. wood
  2. flammable liquids
  3. metals
  4. paper
Show the answer

Answer: B. flammable liquids Oils, solvents.

Theory questions

Find the LFL of a fuel gas: 80 % methane (LFL 5 %), 15 % ethane (3 %), 5 % propane (2.1 %). (3 marks)

Show the model answer

LFL = 1/(0.8/5 + 0.15/3 + 0.05/2.1) = 1/(0.16 + 0.05 + 0.0238) = 4.28 %.

1000 kg of propane (ΔH_c = 46 000 kJ/kg) forms a vapour cloud; yield η = 0.03. Find the TNT equivalent. (3 marks)

Show the model answer

m_TNT = 0.03 × 1000 × 46 000/4686 = 294 kg TNT. At 100 m, Z = 100/294^(1/3) = 15 m/kg^(1/3): overpressure ≈ 10 kPa (window breakage).

Safety hazards in plants

Topics: Mechanical, electrical, pressure, thermal, noise and radiation hazards; confined spaces; work permits; lockout–tagout; static electricity; relief systems and sizing basics; plant layout and spacing; storage tank safety.

Hot work, confined-space entry and line breaking need written permits; lockout–tagout isolates energy before maintenance. Static charge from flowing liquids and powders ignites vapours unless bonded and grounded. Every pressure vessel needs relief against overpressure scenarios (blocked outlet, fire, runaway); relief devices are sized for the worst credible case and discharge to a safe place (flare, scrubber). Layout keeps hazardous units apart and away from control rooms, with clear escape routes.

  • Confined spaces: test O₂ (19.5–23.5 %), flammables (< 10 % LFL), toxics before entry.
  • Spring-loaded relief valves reclose; rupture discs do not.
  • Bonding equalises potential; grounding sends charge to earth.
  • Fire relief: Q = 43.2 F A^0.82 kW (API 521, wetted area A in m²).

Key formulas

  • Confined-space O₂: 19.5–23.5 %
  • API fire heat input Q = 43.2 F A_w^0.82 kW
  • Relief load ṁ = Q/λ

Practice questions

A safe oxygen level for confined-space entry is

  1. 15 %
  2. 19.5–23.5 %
  3. 30 %
  4. 10 %
Show the answer

Answer: B. 19.5–23.5 % OSHA range.

LOTO stands for

  1. lock-out tag-out
  2. low oxygen test only
  3. lift-off take-off
  4. level of tolerance
Show the answer

Answer: A. lock-out tag-out Energy isolation.

A rupture disc

  1. recloses
  2. does not reclose
  3. controls flow
  4. measures pressure
Show the answer

Answer: B. does not reclose One-shot.

Bonding of containers is done to

  1. prevent spills
  2. equalise static potential
  3. save power
  4. cool them
Show the answer

Answer: B. equalise static potential Prevents sparks.

Theory questions

A tank with wetted area 50 m² holds hexane (λ = 335 kJ/kg). Estimate the fire relief load (F = 1). (3 marks)

Show the model answer

Q = 43.2 × 50^0.82 = 43.2 × 24.6 = 1063 kW; ṁ = 1063/335 = 3.17 kg/s of vapour to relieve.

Explain the permit-to-work system. (4 marks)

Show the model answer

Written authorisation for non-routine hazardous jobs (hot work, confined space, electrical). It lists hazards, isolations (LOTO), gas tests, PPE and precautions; signed by issuer and receiver; displayed at the job; closed out and handed back when the plant is safe.

Chemical process safety

Topics: Hazard identification: checklists, what-if, HAZOP with guide words, FMEA; risk assessment: fault trees, event trees, reliability, failure rate, probability of failure on demand; consequence modelling: source models and Gaussian dispersion; inherent safety; layers of protection (LOPA); runaway reactions.

HAZOP examines each line with guide words (no, more, less, reverse, other than) applied to parameters (flow, temperature, pressure, level) to find causes, consequences and safeguards. Risk = frequency × consequence. Reliability R = e^(−μt); for parallel (redundant) components failure probabilities multiply, for series components reliabilities multiply. A fault tree combines events with AND (multiply) and OR (P = 1 − Π(1 − P_i)) gates. Gaussian dispersion estimates downwind concentration C = Q/(πσ_yσ_z u) on the centreline at ground level for a ground source.

  • Inherent safety: minimise, substitute, moderate, simplify.
  • LOPA: each independent layer cuts frequency by its PFD.
  • Interlock with PFD 0.01 ≈ SIL 2.
  • Runaway: heat generation grows exponentially with T, removal only linearly.

Key formulas

  • R = e^(−μt), P = 1 − R
  • Series: R = Π R_i; parallel: P = Π P_i
  • OR gate: P = 1 − Π(1 − P_i); AND gate: P = Π P_i
  • C(x,0,0) = Q/(π σ_y σ_z u)

Practice questions

HAZOP uses

  1. guide words
  2. Pareto charts
  3. Gantt charts
  4. Moody diagram
Show the answer

Answer: A. guide words No, more, less…

Two independent safeguards each with PFD 0.1 give a combined PFD of

  1. 0.2
  2. 0.01
  3. 0.1
  4. 0.05
Show the answer

Answer: B. 0.01 Both must fail.

Reliability of a component with μ = 0.1/yr over 1 year is

  1. 0.905
  2. 0.1
  3. 0.9
  4. 0.5
Show the answer

Answer: A. 0.905 e^(−0.1).

Substituting a less hazardous material is

  1. inherent safety
  2. PPE
  3. emergency response
  4. insurance
Show the answer

Answer: A. inherent safety Removes the hazard.

Theory questions

A reactor’s high-temperature alarm (failure rate 0.2/yr) and a shut-down interlock (0.1/yr) protect against runaway. With yearly testing, estimate the probability that both fail in a year. (4 marks)

Show the model answer

P_alarm = 1 − e^(−0.2) = 0.181; P_interlock = 1 − e^(−0.1) = 0.095. Both (AND): 0.181 × 0.095 = 0.0172 per year.

Carry out a short HAZOP for a cooling-water line to an exothermic reactor. (5 marks)

Show the model answer

Guide word NO flow: causes pump trip, valve closed, line blocked; consequence runaway; safeguards flow alarm, temperature interlock, standby pump. MORE flow: overcooling, poor conversion. LESS flow: fouling, partial closure, rising temperature. REVERSE: back-flow on pump stop, non-return valve. Actions recorded with owners.

Nuclear safety

Topics: Radiation types and units (Bq, Gy, Sv); biological effects; dose limits; shielding, time and distance; reactor safety systems; accidents: Three Mile Island, Chernobyl, Fukushima; radioactive waste management; AERB in India.

Radiation exposure is limited by time, distance and shielding. Intensity falls with the inverse square of distance and exponentially through a shield: I = I₀e^(−μx); the half-value layer is ln 2/μ. Dose limits: 20 mSv/year averaged for workers, 1 mSv/year for the public. Reactor safety relies on defence in depth: fuel cladding, pressure boundary, containment and emergency core cooling. Chernobyl (1986) combined an unstable reactor design with a test that disabled safety systems; Fukushima (2011) lost cooling after a tsunami.

  • Units: activity Bq; absorbed dose Gy; effective dose Sv.
  • Inverse square: doubling distance quarters the dose.
  • Half-value layer: lead ≈ 1 cm for Co-60 gamma (approx.).
  • AERB regulates nuclear and radiation safety in India.

Key formulas

  • I = I₀ e^(−μx)
  • HVL = ln 2/μ
  • I₂ = I₁(d₁/d₂)²
  • Dose = rate × time

Practice questions

Effective dose is measured in

  1. gray
  2. sievert
  3. becquerel
  4. curie
Show the answer

Answer: B. sievert Sv.

Doubling distance from a point source cuts dose rate to

  1. 1/2
  2. 1/4
  3. 1/8
  4. same
Show the answer

Answer: B. 1/4 Inverse square.

The public dose limit is about

  1. 1 mSv/yr
  2. 20 mSv/yr
  3. 100 mSv/yr
  4. 1 Sv/yr
Show the answer

Answer: A. 1 mSv/yr ICRP.

In India nuclear safety is regulated by

  1. AERB
  2. CPCB
  3. BIS
  4. DGMS
Show the answer

Answer: A. AERB Atomic Energy Regulatory Board.

Theory questions

A source gives 8 mSv/h at 1 m. How far must a worker stay for 0.02 mSv/h, and how many half-value layers would do the same at 1 m? (4 marks)

Show the model answer

Distance: 1 × √(8/0.02) = 20 m. Shielding: factor 400 = 2^n ⇒ n = 8.6 HVLs.

Explain the principle of defence in depth in reactor safety. (3 marks)

Show the model answer

Multiple independent barriers and layers: fuel matrix, cladding, reactor coolant boundary, containment; plus prevention, control and mitigation systems and emergency plans, so no single failure causes a release.

Notes, examples and questions were written for this studio; the prescribed books are listed in the studio for reference.

Frequently asked questions

What is the Safety in Chemical Engineering Studio?

Learn from accidents. Design them out. Accident case studies, PPE, toxicology and TLVs, fire and explosion, relief, HAZOP, fault trees, dispersion and nuclear safety from the ASTU CHE1818PE42 syllabus.

What can I do in the Safety in Chemical Engineering Studio?

Bhopal, Flixborough and other lessons; TLV, TWA and toxic exposure; Flammability limits, TNT equivalence and relief; HAZOP, reliability and gas dispersion.

Is the Safety in Chemical Engineering Studio free?

Yes. It is free and runs in your browser with no sign-up.

Open the interactive studio →