IITIAN1997 STUDIO

Cane Sugar

Double sulphitation process (plantation white sugar)

Watch the animated P&ID →

Sugar (sucrose) is extracted from sugar cane, which contains about 12–15 % sucrose. India’s mills mostly make plantation white sugar by the double sulphitation process: juice is extracted by milling, clarified with lime and sulphur dioxide, concentrated in multiple-effect evaporators, and crystallised in vacuum pans; crystals are separated from the mother liquor in centrifuges and dried. Bagasse fuels the boilers and molasses — the final mother liquor — feeds the distillery, making the sugar factory the raw-material base of the bio-based industry.

Raw materials

  • Sugar cane (12–15 % sucrose, 12–15 % fibre)
  • Lime (milk of lime), sulphur (burnt to SO₂), phosphoric acid, flocculants
  • Imbibition water, steam (from bagasse boilers)

Products

  • Plantation white sugar (99.7 % sucrose), raw sugar, refined sugar
  • By-products: bagasse (≈ 30 % of cane: fuel, paper, cogeneration), molasses (≈ 4–4.5 % of cane: distillery), press mud (≈ 3–4 %: compost)

Uses

  • Food and beverages
  • Molasses → ethanol, yeast, citric acid; bagasse → power, paper, particle board

Reactions

  • Defecation: Ca(OH)₂ + H₃PO₄ → Ca₃(PO₄)₂ floc (entraps colloids)
  • Sulphitation: Ca(OH)₂ + SO₂ → CaSO₃↓ + H₂O ; SO₂ also bleaches colour
  • Inversion loss (avoid): C₁₂H₂₂O₁₁ + H₂O → glucose + fructose (acid, heat)
  • Caramelisation and Maillard colour formation at high temperature

Operating conditions

Milling4–6 tandem three-roller mills with imbibition; extraction ≈ 95 %
ClarificationpH 7.0–7.2 after liming and sulphitation, juice heated to 102–105 °C
EvaporationQuadruple/quintuple effect, juice 15 → 60–65 °Brix
Pan boilingVacuum pans at 60–65 °C, three-massecuite (A, B, C) system
Recovery≈ 10–11 % sugar on cane

Process, step by step

  1. Cane preparation and milling. Cane is cut by knives and shredded to open the cells, then crushed in a tandem of three-roller mills. Hot imbibition water is added before the last mills (compound imbibition) to wash out sugar; mixed juice is collected and the residual fibre — bagasse — goes to the boilers.
  2. Juice heating, liming and sulphitation. Raw juice is heated to about 70 °C, treated with milk of lime and SO₂ gas (from burning sulphur) in the juice sulphiter, which precipitates calcium sulphite and phosphate along with colloids and colouring matter, keeping the pH near neutral to avoid inversion.
  3. Clarification. Treated juice is heated to 102–105 °C, flashed and settled in a continuous clarifier with flocculant. Clear juice overflows; the mud is filtered on rotary vacuum filters to recover sugar, leaving press mud (filter cake).
  4. Evaporation. Clear juice (≈ 15 °Brix) is concentrated to syrup of 60–65 °Brix in a quadruple or quintuple-effect evaporator. Vapour from each body heats the next, and vapour bleeds heat the juice heaters and pans — a key energy saving. The syrup is sulphited again (double sulphitation) for colour.
  5. Crystallisation in vacuum pans. Syrup is boiled under vacuum (60–65 °C) in pans, seeded with fine sugar slurry and fed until a massecuite of crystals in mother liquor forms. Massecuite is dropped into crystallisers where cooling and stirring complete crystal growth. A three-massecuite boiling scheme exhausts the sugar from the molasses.
  6. Centrifuging, drying and grading. High-speed batch centrifuges separate crystals from the mother liquor (molasses), washing them with water/steam. Sugar is dried and cooled in a hopper or rotary dryer, graded by size (L-30, M-30, S-30) and bagged. Final molasses goes to the distillery.

Major engineering problems

Inversion and colour formation

Neutral pH, short residence at high temperature, clarification and sulphitation.

Scaling of evaporator tubes

Good clarification, chemical/mechanical descaling during off-season or weekly.

Energy and bagasse balance

Vapour bleeding, high-pressure boilers and cogeneration (surplus power export).

Sulphur in sugar (health/export)

Defecation–remelt or carbonation processes, refined sugar via ion exchange.

Effluents and press mud

Effluent treatment, composting press mud with spent wash.

Seasonal operation (120–180 days)

Diversification: cogeneration, distillery, off-season maintenance.

Notes

  • °Brix = % dissolved solids by mass; purity = sucrose / Brix × 100.
  • Carbonation process (lime + CO₂) gives better quality and is used in refineries.
  • Raw sugar is refined by affination, carbonation/phosphatation, decolourisation (carbon/ion exchange) and recrystallisation.

Practice questions

The main fuel of a sugar factory is

  1. coal
  2. bagasse
  3. molasses
  4. natural gas
Show the answer

Answer: B. bagasse Fibrous residue of cane.

In the double sulphitation process juice is clarified with

  1. lime and CO₂
  2. lime and SO₂
  3. alum
  4. activated carbon only
Show the answer

Answer: B. lime and SO₂ Plantation white sugar.

Final molasses is used mainly for

  1. fuel in boilers
  2. alcohol production
  3. cattle feed only
  4. paper
Show the answer

Answer: B. alcohol production Distillery raw material.

Massecuite is

  1. clarified juice
  2. mixture of sugar crystals and mother liquor
  3. filter cake
  4. bagasse
Show the answer

Answer: B. mixture of sugar crystals and mother liquor From the vacuum pan.

Sugar is boiled in vacuum pans to

  1. avoid inversion and caramelisation at high temperature
  2. remove SO₂
  3. sterilise
  4. increase pH
Show the answer

Answer: A. avoid inversion and caramelisation at high temperature Low boiling point.

°Brix measures

  1. purity
  2. dissolved solids by mass
  3. pH
  4. colour
Show the answer

Answer: B. dissolved solids by mass Refractometric.

Theory questions

Describe the manufacture of cane sugar by the double sulphitation process. (8 marks)

Show the model answer

Cane preparation and milling with imbibition (bagasse to boilers); juice heating, liming and sulphitation; heating to 102–105 °C, clarification, mud filtration (press mud); multiple-effect evaporation to 60–65 °Brix; syrup sulphitation; vacuum pan boiling and seeding, crystallisers; centrifugals separating molasses; drying, grading, bagging.

List the by-products of a sugar mill and their uses. (3 marks)

Show the model answer

Bagasse — boiler fuel, cogeneration, paper, particle board; molasses — ethanol, yeast, citric acid, cattle feed; press mud — compost, wax; also surplus power.

Frequently asked questions

How is cane sugar manufactured?

Double sulphitation process (plantation white sugar). Sugar (sucrose) is extracted from sugar cane, which contains about 12–15 % sucrose. India’s mills mostly make plantation white sugar by the double sulphitation process: juice is extracted by milling, clarified with lime and sulphur dioxide, concentrated in multiple-effect evaporators, and crystallised in vacuum pans; crystals are separated from the mother liquor in centrifuges and dried. Bagasse fuels the boilers and molasses — the final mother liquor — feeds the distillery, making the sugar factory the raw-material base of the bio-based industry.

What raw materials are used to make cane sugar?

Sugar cane (12–15 % sucrose, 12–15 % fibre); Lime (milk of lime), sulphur (burnt to SO₂), phosphoric acid, flocculants; Imbibition water, steam (from bagasse boilers)

What catalyst is used in cane sugar production?

no catalyst (physical separation with lime/SO₂ clarification)

What is cane sugar used for?

Food and beverages; Molasses → ethanol, yeast, citric acid; bagasse → power, paper, particle board

Watch the animated P&ID →