IITIAN1997 STUDIO

Soda Ash

Solvay (ammonia–soda) process

Watch the animated P&ID →

Soda ash (sodium carbonate) is made from salt and limestone by the Solvay ammonia–soda process. Ammoniated brine is carbonated with CO₂ from a lime kiln; sparingly soluble sodium bicarbonate precipitates and is filtered and calcined to soda ash. Ammonia is recovered by distilling the filter liquor with milk of lime, and CO₂ from the calciner is recycled — so the net reaction is simply 2NaCl + CaCO₃ → Na₂CO₃ + CaCl₂. In India, the dual (modified Solvay) process recovers ammonium chloride as a fertiliser instead of discharging calcium chloride.

Raw materials

  • Brine (purified, saturated NaCl ≈ 310 g/L)
  • Limestone (CaCO₃) and coke for the lime kiln
  • Ammonia (make-up only; mostly recycled)
  • Water and steam

Products

  • Light soda ash (bulk density ≈ 0.5 t/m³)
  • Dense soda ash (≈ 1.0 t/m³, via monohydrate)
  • Sodium bicarbonate (refined)
  • By-product: calcium chloride liquor (or NH₄Cl in the dual process)

Uses

  • Glass manufacture — about half of soda ash
  • Soaps and detergents, sodium silicate
  • Chemicals (caustic soda by causticisation, sodium phosphates), pulp and paper, water treatment, metallurgy

Reactions

  • CaCO₃ → CaO + CO₂ (lime kiln ≈ 1000 °C, endothermic)
  • NaCl + NH₃ + CO₂ + H₂O → NaHCO₃↓ + NH₄Cl (carbonating tower, 25–30 °C at the bottom)
  • 2NaHCO₃ → Na₂CO₃ + CO₂ + H₂O (calciner 160–200 °C)
  • CaO + H₂O → Ca(OH)₂ ; 2NH₄Cl + Ca(OH)₂ → 2NH₃ + CaCl₂ + 2H₂O (ammonia recovery)
  • Overall: 2NaCl + CaCO₃ → Na₂CO₃ + CaCl₂

Operating conditions

Brine purificationRemove Ca²⁺ and Mg²⁺ with Na₂CO₃/NaOH (or lime–soda)
CarbonationSolvay tower ≈ 25 m, bubble-cap trays, cooled bottom, 25–30 °C
CO₂ gasKiln gas 35–40 % CO₂ + calciner gas ≈ 90 % CO₂, compressed to 2–3 bar
CalcinerSteam-heated rotary dryer, 160–200 °C
Salt utilisation≈ 70–75 % (limited by the NaHCO₃–NH₄Cl equilibrium)

Process, step by step

  1. Lime kiln. Limestone and coke are charged to a vertical shaft kiln; calcination at about 1000 °C gives quicklime and kiln gas with 35–40 % CO₂. The gas is cleaned (washed) and compressed for carbonation.
  2. Brine purification and ammoniation. Saturated brine is purified to remove calcium and magnesium (which would scale the towers and contaminate the product), then flows down the ammonia absorber where it absorbs ammonia gas recovered from the ammonia still. Heat of absorption is removed by coolers. Ammoniated brine contains about 90–100 g/L NH₃.
  3. Carbonation (Solvay tower). Ammoniated brine enters the top of the carbonating tower and meets CO₂ rising from the bottom. NH₄HCO₃ forms and reacts with NaCl; the less soluble NaHCO₃ crystallises. The lower part of the tower is cooled to 25–30 °C to increase yield and give coarse crystals. Towers alternate between carbonating and cleaning (dissolving scale) duty.
  4. Filtration. The bicarbonate slurry is filtered on rotary vacuum filters and washed to remove chloride. The filter liquor (NH₄Cl + unreacted NaCl) goes to ammonia recovery.
  5. Calcination. Wet bicarbonate is decomposed in a steam-heated rotary calciner at 160–200 °C. The CO₂ released (≈ 90 %) is cooled and recycled to the carbonating towers. Light soda ash is cooled and stored; dense ash is made by hydrating to the monohydrate and recalcining.
  6. Ammonia recovery. Quicklime is slaked to milk of lime. Filter liquor is first heated in the upper (heater) section of the ammonia still to drive off free NH₃ and CO₂, then mixed with milk of lime in the prelimer, and the fixed ammonia (NH₄Cl) is liberated and stripped with steam in the lower section. The recovered ammonia returns to the absorber; the waste CaCl₂ liquor leaves the bottom.

Major engineering problems

Disposal of calcium chloride waste

Huge volumes of CaCl₂/NaCl liquor with suspended solids — settling ponds, sale of CaCl₂, or the dual process (recover NH₄Cl as fertiliser).

Low salt utilisation (≈ 70–75 %)

Optimise NH₃/CO₂ ratio and temperature; dual process uses the remaining liquor.

Scaling of carbonating towers

Alternate towers in carbonating and cleaning service; good brine purification.

Ammonia losses

Efficient stills and absorbers, scrubbing of vent gases (losses ≈ 1–3 kg NH₃ per t soda ash).

Corrosion

Chloride liquors at high temperature — cast iron towers, lined equipment.

Notes

  • India’s producers (Gujarat) use solar salt and sea-shell/limestone; several use the dual process giving equimolar soda ash and NH₄Cl.
  • Natural soda ash (trona, Na₂CO₃·NaHCO₃·2H₂O) mined in Wyoming competes with Solvay soda ash.
  • Leblanc process (salt + sulphuric acid → salt-cake → reduced with coal and limestone) is historic.
  • Theoretical: 117 kg NaCl → 106 kg Na₂CO₃; at 75 % salt utilisation about 1.5 t salt per t soda ash.

Practice questions

In the Solvay process, the product precipitated in the carbonating tower is

  1. Na₂CO₃
  2. NaHCO₃
  3. NH₄HCO₃
  4. CaCO₃
Show the answer

Answer: B. NaHCO₃ NaHCO₃ is least soluble in the ammoniated brine system.

The waste product of the Solvay process is

  1. NH₄Cl
  2. CaCl₂
  3. Na₂SO₄
  4. CaSO₄
Show the answer

Answer: B. CaCl₂ From ammonia recovery with lime.

The dual (modified Solvay) process co-produces

  1. CaCl₂
  2. NH₄Cl
  3. NaOH
  4. Na₂SO₄
Show the answer

Answer: B. NH₄Cl Ammonium chloride fertiliser.

Light soda ash is converted to dense soda ash by

  1. grinding
  2. hydration to monohydrate and recalcination
  3. compression
  4. melting
Show the answer

Answer: B. hydration to monohydrate and recalcination Recrystallisation as Na₂CO₃·H₂O.

Calcination of sodium bicarbonate takes place at about

  1. 60 °C
  2. 160–200 °C
  3. 500 °C
  4. 1000 °C
Show the answer

Answer: B. 160–200 °C Steam-heated rotary calciner.

Which raw material supplies CO₂ in the Solvay process?

  1. coke only
  2. limestone (and calciner recycle)
  3. natural gas
  4. air
Show the answer

Answer: B. limestone (and calciner recycle) Lime kiln gas plus recycled calciner gas.

Theory questions

Write the chemical reactions of the Solvay process and the overall reaction. (4 marks)

Show the model answer

CaCO₃ → CaO + CO₂; NaCl + NH₃ + CO₂ + H₂O → NaHCO₃ + NH₄Cl; 2NaHCO₃ → Na₂CO₃ + CO₂ + H₂O; CaO + H₂O → Ca(OH)₂; 2NH₄Cl + Ca(OH)₂ → 2NH₃ + CaCl₂ + 2H₂O. Overall 2NaCl + CaCO₃ → Na₂CO₃ + CaCl₂.

Explain with a flow diagram the manufacture of soda ash by the Solvay process. (10 marks)

Show the model answer

Lime kiln (CO₂ + CaO); brine purification and ammoniation in the absorber; carbonation in Solvay towers (cooled bottom) precipitating NaHCO₃; rotary vacuum filtration; calcination at 160–200 °C with CO₂ recycle; ammonia recovery in the still with milk of lime; CaCl₂ liquor discharge; light and dense ash.

What are the engineering problems of the Solvay process? (5 marks)

Show the model answer

CaCl₂ effluent disposal; incomplete salt utilisation; tower scaling (alternate cleaning); ammonia losses; corrosion of chloride equipment; large energy for calcination and distillation.

Frequently asked questions

How is soda ash manufactured?

Solvay (ammonia–soda) process. Soda ash (sodium carbonate) is made from salt and limestone by the Solvay ammonia–soda process. Ammoniated brine is carbonated with CO₂ from a lime kiln; sparingly soluble sodium bicarbonate precipitates and is filtered and calcined to soda ash. Ammonia is recovered by distilling the filter liquor with milk of lime, and CO₂ from the calciner is recycled — so the net reaction is simply 2NaCl + CaCO₃ → Na₂CO₃ + CaCl₂. In India, the dual (modified Solvay) process recovers ammonium chloride as a fertiliser instead of discharging calcium chloride.

What raw materials are used to make soda ash?

Brine (purified, saturated NaCl ≈ 310 g/L); Limestone (CaCO₃) and coke for the lime kiln; Ammonia (make-up only; mostly recycled); Water and steam

What catalyst is used in soda ash production?

no catalyst (ammonia as recycled reagent)

What is soda ash used for?

Glass manufacture — about half of soda ash; Soaps and detergents, sodium silicate; Chemicals (caustic soda by causticisation, sodium phosphates), pulp and paper, water treatment, metallurgy

Watch the animated P&ID →