IITIAN1997 STUDIO

Soap

Saponification — kettle (full-boiled) and continuous fat-splitting processes

Watch the animated P&ID →

Soap is the sodium (hard soap) or potassium (soft soap) salt of long-chain fatty acids. It is made either by saponifying fats directly with caustic soda — in the traditional kettle process or continuous saponifiers — or by first splitting fats into fatty acids and glycerine with high-pressure steam, distilling the fatty acids and neutralising them. Glycerine is recovered from the spent lye or sweet water. Neat soap is dried under vacuum and finished into bars by milling, plodding and stamping.

Raw materials

  • Fats and oils: tallow, palm, palm kernel, coconut, rice-bran and acid oils (blend sets lather and hardness)
  • Caustic soda (NaOH) or caustic potash (KOH)
  • Common salt (graining), water
  • Additives: perfume, colour, preservatives (EDTA), fillers (talc, sodium silicate)

Products

  • Toilet and laundry soap (bars, flakes), soft/liquid soap
  • By-product: glycerine (crude 80 %, refined 99.5 %)

Uses

  • Personal hygiene and laundry
  • Glycerine: pharmaceuticals, cosmetics, explosives (nitroglycerine), food

Reactions

  • Saponification: (RCOO)₃C₃H₅ + 3NaOH → 3RCOONa + C₃H₅(OH)₃ (exothermic)
  • Fat splitting: (RCOO)₃C₃H₅ + 3H₂O ⇌ 3RCOOH + C₃H₅(OH)₃ (250 °C, 50 bar)
  • Neutralisation: RCOOH + NaOH → RCOONa + H₂O
  • Hard water: 2RCOONa + Ca²⁺ → (RCOO)₂Ca↓ (scum) + 2Na⁺

Operating conditions

Kettle boiling≈ 100 °C with open steam, several days per batch
Fat splitting (Colgate–Emery)Counter-current column, 250–260 °C, 50 bar, 98–99 % hydrolysis
Fatty acid distillationVacuum, 200–250 °C
Neat soap≈ 63–65 % TFM, 30 % water
Vacuum spray dryingTo 78–80 % TFM for bars
Grade 1 toilet soapTFM ≥ 76 % (BIS)

Process, step by step

  1. Fat blending and preparation. Fats and oils are blended for the desired properties: tallow/palm give hard, long-lasting bars; coconut/palm kernel give quick, abundant lather. The blend is bleached and deodorised if necessary.
  2. Fat splitting (continuous route). In the Colgate–Emery process molten fat is pumped into the bottom of a tall splitting column and hot water enters the top; at 250 °C and 50 bar the fat is hydrolysed counter-currently to 98–99 %. Fatty acids leave the top, sweet water (12–20 % glycerine) the bottom.
  3. Fatty acid distillation. Crude fatty acids are distilled under vacuum to remove colour and odour bodies; fractionation can separate lauric, palmitic, stearic and oleic cuts.
  4. Neutralisation / saponification. Distilled fatty acids are neutralised with caustic soda in a continuous mixer to neat soap. (In the kettle process, fat is boiled with caustic, then salt is added to "grain out" the soap from the spent lye containing glycerine; after several washings the soap is "fitted" to give neat soap and nigre.)
  5. Drying. Neat soap (≈ 30 % water) is heated and sprayed into a vacuum spray dryer where it flashes to soap noodles of about 12–20 % moisture.
  6. Finishing. Noodles are mixed with perfume, colour and additives in an amalgamator, milled between rolls, compacted and extruded in a vacuum plodder as a continuous bar, cut into billets and stamped into tablets, then wrapped.
  7. Glycerine recovery. Sweet water or spent lye is purified (removal of fatty matter and salts), concentrated in evaporators to crude glycerine (80–88 %), and vacuum-distilled and bleached to refined glycerine (99.5 %).

Major engineering problems

Long batch times of the kettle process

Continuous saponification or fat splitting + neutralisation.

Glycerine recovery and effluent

Evaporation of lye/sweet water, salt recovery; treatment of fatty effluent.

Quality control (TFM, free alkali, moisture)

Precise caustic dosing, on-line analysis; free alkali < 0.05 %.

Corrosion and high-pressure splitting

Stainless steel (316L) columns; careful pressure control.

Rancidity and discolouration

Antioxidants and chelating agents (EDTA), good raw material quality.

Notes

  • TFM (total fatty matter) is the main quality index of soap.
  • Potassium soaps are softer and more soluble (liquid/shaving soaps).
  • Soaps fail in hard and acidic water — a key reason synthetic detergents replaced them for laundry.
  • Transparent soaps contain glycerine, alcohol and sugar.

Practice questions

Saponification of a fat with NaOH gives

  1. fatty acid and glycerol
  2. soap and glycerol
  3. ester and water
  4. soap and ethanol
Show the answer

Answer: B. soap and glycerol 3NaOH per triglyceride.

In the kettle process, soap is separated from glycerine by adding

  1. acid
  2. common salt (graining)
  3. sugar
  4. alcohol
Show the answer

Answer: B. common salt (graining) Salting out.

The Colgate–Emery process is a

  1. detergent sulphonation
  2. continuous high-pressure fat splitting
  3. oil extraction
  4. glycerine distillation
Show the answer

Answer: B. continuous high-pressure fat splitting 250 °C, 50 bar.

TFM stands for

  1. total fat mass
  2. total fatty matter
  3. true fatty material
  4. total free moisture
Show the answer

Answer: B. total fatty matter Grade 1 ≥ 76 %.

Soft soaps are made with

  1. NaOH
  2. KOH
  3. Ca(OH)₂
  4. NH₃
Show the answer

Answer: B. KOH Potassium soaps.

Soaps form scum in hard water because

  1. they decompose
  2. calcium and magnesium soaps are insoluble
  3. they oxidise
  4. they foam
Show the answer

Answer: B. calcium and magnesium soaps are insoluble (RCOO)₂Ca.

Theory questions

Describe the manufacture of soap by the continuous fat-splitting process. (8 marks)

Show the model answer

Fat blend; counter-current splitting column (250 °C, 50 bar) → fatty acids (top) and sweet water (bottom); vacuum distillation of fatty acids; continuous neutralisation with NaOH to neat soap; vacuum spray drying to noodles; amalgamation with perfume, milling, plodding, stamping; glycerine recovery from sweet water by evaporation and distillation.

Explain the kettle (full-boiled) process for soap. (5 marks)

Show the model answer

Fat boiled with caustic soda by open steam (saponification); salt added to grain out soap; spent lye with glycerine drawn off; washing changes; strengthening boil with excess caustic; fitting to obtain neat soap (top) and nigre (bottom); neat soap dried and finished.

Frequently asked questions

How is soap manufactured?

Saponification — kettle (full-boiled) and continuous fat-splitting processes. Soap is the sodium (hard soap) or potassium (soft soap) salt of long-chain fatty acids. It is made either by saponifying fats directly with caustic soda — in the traditional kettle process or continuous saponifiers — or by first splitting fats into fatty acids and glycerine with high-pressure steam, distilling the fatty acids and neutralising them. Glycerine is recovered from the spent lye or sweet water. Neat soap is dried under vacuum and finished into bars by milling, plodding and stamping.

What raw materials are used to make soap?

Fats and oils: tallow, palm, palm kernel, coconut, rice-bran and acid oils (blend sets lather and hardness); Caustic soda (NaOH) or caustic potash (KOH); Common salt (graining), water; Additives: perfume, colour, preservatives (EDTA), fillers (talc, sodium silicate)

What catalyst is used in soap production?

no catalyst (alkaline saponification)

What is soap used for?

Personal hygiene and laundry; Glycerine: pharmaceuticals, cosmetics, explosives (nitroglycerine), food

Watch the animated P&ID →