IITIAN1997 STUDIO

Common Salt

Solar evaporation of sea water; vacuum salt

Watch the animated P&ID →

Common salt (NaCl) is the raw material of the whole chlor-alkali and soda-ash industry, besides its use as edible salt. Most Indian salt is made by solar evaporation of sea water or sub-soil brine in Gujarat, Tamil Nadu and Rajasthan. Brine is concentrated in shallow condenser pans where impurities precipitate in sequence, and NaCl crystallises in crystalliser pans between 25 and 29 °Bé. High-purity vacuum salt is made by evaporating purified brine in multiple-effect vacuum evaporators.

Raw materials

  • Sea water (≈ 3.5 % total salts, 2.7 % NaCl, 3.5 °Bé)
  • Sub-soil / lake brines (Rann of Kutch, Sambhar)
  • Rock salt deposits (solution mining)
  • Potassium iodate (iodisation), anti-caking agents

Products

  • Solar salt (94–98 % NaCl)
  • Refined vacuum salt (99.5–99.9 % NaCl)
  • Iodised edible salt
  • Bittern by-products: bromine, MgCl₂, MgSO₄, KCl

Uses

  • Chlor-alkali (Cl₂ + NaOH) and soda ash — the largest industrial use
  • Edible salt, food processing, leather curing, de-icing
  • Water softener regeneration, metallurgy, dyes

Reactions

  • Fractional crystallisation by evaporation (physical process)
  • CaCO₃ and Fe₂O₃ precipitate first (< 7 °Bé); CaSO₄·2H₂O (gypsum) at 13–25 °Bé
  • NaCl crystallises at 25.5–29 °Bé
  • Bittern (> 29–30 °Bé): MgSO₄, MgCl₂, KCl, NaBr remain in solution

Operating conditions

Condenser/reservoir pans3.5 → 25 °Bé (several weeks)
Crystalliser pans25.5 → 29 °Bé, brine depth 10–20 cm
HarvestEvery 2–3 weeks, crust scraped manually or mechanically
Vacuum saltMultiple-effect (3–5) vacuum evaporators, 50–130 °C
Iodisation30 ppm iodine at production (KIO₃ spray)

Process, step by step

  1. Intake and reservoir. Sea water is pumped at high tide into large reservoirs where suspended matter settles. Evaporation begins and density rises slowly from 3.5 °Bé.
  2. Condensers (evaporating ponds). Brine flows by gravity through a series of shallow condenser pans. Sun and wind evaporate water; calcium carbonate and iron oxide deposit first and gypsum precipitates between 13 and 25 °Bé. Keeping gypsum out of the crystallisers is the key to purer salt.
  3. Crystallisers. Saturated brine at 25.5 °Bé is fed to levelled crystalliser beds with compacted clay floors. NaCl crystallises as the brine is concentrated to about 29 °Bé. Beyond this, magnesium salts would co-crystallise, so the mother liquor (bittern) is drained off and sent to bromine/potash recovery.
  4. Harvesting and washing. Salt is scraped, heaped, and washed in salt washeries with saturated brine to remove adhering bittern, clay and gypsum, which raises purity to 97–99 %.
  5. Refining (vacuum salt). For refined salt, raw salt or brine is dissolved, purified with soda ash and caustic (Ca, Mg removal), and evaporated in multiple-effect vacuum evaporators. The salt slurry is centrifuged and dried in a fluid-bed dryer.
  6. Iodisation and packing. Potassium iodate solution is sprayed on the dried salt in a mixer (30 ppm iodine), an anti-caking agent may be added, and the salt is packed.

Major engineering problems

Dependence on weather

Production limited to the dry season; cyclones and rain dissolve stocks — covered storage, quick harvesting.

Impurities (Ca, Mg, SO₄)

Proper density control in pans, gypsum removal before crystallisers, washing; chemical purification for vacuum salt.

Bittern disposal

Recover bromine, magnesium and potash compounds instead of discharging.

Caking and moisture

Drying, anti-caking agents (e.g. sodium ferrocyanide, silicates), moisture-proof packing.

Scaling in evaporators

Brine pre-treatment, seeded evaporation, periodic boil-outs.

Notes

  • Degree Baumé for liquids heavier than water: °Bé = 145 − 145/SG.
  • Gujarat produces about three-quarters of India’s salt; India is the third largest producer in the world.
  • Rock salt is mined or solution-mined by pumping water into the deposit and withdrawing saturated brine.

Practice questions

Common salt crystallises from sea-water brine at about

  1. 10–15 °Bé
  2. 25.5–29 °Bé
  3. 35 °Bé
  4. 3.5 °Bé
Show the answer

Answer: B. 25.5–29 °Bé Below this gypsum deposits; above it Mg salts.

The mother liquor left after NaCl crystallisation is called

  1. brine
  2. bittern
  3. lye
  4. spent wash
Show the answer

Answer: B. bittern Rich in Mg, K and Br salts.

Which impurity deposits mainly in the condenser pans between 13 and 25 °Bé?

  1. NaCl
  2. gypsum (CaSO₄·2H₂O)
  3. MgCl₂
  4. KCl
Show the answer

Answer: B. gypsum (CaSO₄·2H₂O) Removing it improves salt purity.

Edible salt is iodised with

  1. NaI
  2. KIO₃
  3. I₂
  4. CaI₂
Show the answer

Answer: B. KIO₃ Potassium iodate is more stable.

Vacuum salt is produced in

  1. solar pans
  2. multiple-effect vacuum evaporators
  3. rotary kilns
  4. electrolytic cells
Show the answer

Answer: B. multiple-effect vacuum evaporators From purified brine.

Theory questions

Describe the manufacture of salt from sea water by solar evaporation. (8 marks)

Show the model answer

Intake to reservoirs; condensers where water evaporates and CaCO₃, Fe₂O₃, gypsum deposit (to 25 °Bé); crystallisers 25.5–29 °Bé; draining bittern; harvesting; washing in washeries; refining/drying; iodisation; packing. Problems: weather, impurities, bittern disposal.

What is bittern? How is it utilised? (3 marks)

Show the model answer

Mother liquor after salt crystallisation (≈ 29–30 °Bé) rich in MgCl₂, MgSO₄, KCl and NaBr; used for bromine (chlorine oxidation, air blowing), magnesium compounds, potassium sulphate/chloride.

Frequently asked questions

How is common salt manufactured?

Solar evaporation of sea water; vacuum salt. Common salt (NaCl) is the raw material of the whole chlor-alkali and soda-ash industry, besides its use as edible salt. Most Indian salt is made by solar evaporation of sea water or sub-soil brine in Gujarat, Tamil Nadu and Rajasthan. Brine is concentrated in shallow condenser pans where impurities precipitate in sequence, and NaCl crystallises in crystalliser pans between 25 and 29 °Bé. High-purity vacuum salt is made by evaporating purified brine in multiple-effect vacuum evaporators.

What raw materials are used to make common salt?

Sea water (≈ 3.5 % total salts, 2.7 % NaCl, 3.5 °Bé); Sub-soil / lake brines (Rann of Kutch, Sambhar); Rock salt deposits (solution mining); Potassium iodate (iodisation), anti-caking agents

What catalyst is used in common salt production?

no catalyst (solar evaporation)

What is common salt used for?

Chlor-alkali (Cl₂ + NaOH) and soda ash — the largest industrial use; Edible salt, food processing, leather curing, de-icing; Water softener regeneration, metallurgy, dyes

Watch the animated P&ID →