Potassium fertilisers are mined, not synthesised. Sylvinite ore (a mixture of KCl and NaCl) is refined either by froth flotation or by hot leaching and crystallisation, exploiting the fact that KCl solubility rises steeply with temperature while that of NaCl hardly changes. The product, muriate of potash (MOP), contains about 60 % K₂O. Sulphate of potash (SOP, 50 % K₂O) is preferred for chloride-sensitive crops and is made from KCl by the Mannheim process or from natural sulphate minerals and bitterns. India imports all its MOP.
Raw materials
- Sylvinite ore (KCl + NaCl), carnallite (KCl·MgCl₂·6H₂O)
- Natural brines and sea bittern (India: schoenite route)
- Sulphuric acid (Mannheim SOP)
Products
- Muriate of potash (MOP) 60–62 % K₂O, standard and granular
- Sulphate of potash (SOP) 50 % K₂O
- Potassium magnesium sulphate
Uses
- Potassic fertiliser (≈ 95 %)
- KOH, K₂CO₃ manufacture
- Industrial: drilling fluids, glass, soaps
Reactions
- Physical separation: KCl solubility ≈ 34 g/100 g water at 20 °C vs 56 g at 100 °C; NaCl ≈ 36 → 39 g
- Mannheim SOP: 2KCl + H₂SO₄ → K₂SO₄ + 2HCl (≈ 600 °C)
- K₂O equivalent: % K₂O = % K × 1.205; KCl = 63.2 % K₂O
Operating conditions
| Hot leach | Brine saturated in NaCl at ≈ 100 °C dissolves KCl selectively |
|---|---|
| Crystallisation | Vacuum cooling crystallisers, 100 → 25 °C |
| Flotation alternative | Amine collector at ambient temperature, sylvite floated from halite |
| Drying | Fluid-bed or rotary dryer, granulation by compaction |
Process, step by step
- Mining and crushing. Sylvinite is mined by underground room-and-pillar mining or solution mining and crushed and ground to liberate KCl crystals from halite (NaCl).
- Hot leaching. The ore is contacted with recycled mother liquor heated to about 100 °C, which is already saturated with NaCl. Only KCl dissolves (its solubility increases sharply with temperature); NaCl and clay remain undissolved.
- Solid–liquid separation. The hot slurry is settled in a thickener and filtered; the NaCl residue (tailings) is washed and discharged, and the clear hot KCl-rich brine goes to the crystallisers.
- Vacuum crystallisation. Hot brine is cooled in stages in vacuum crystallisers by flashing; KCl crystallises out while NaCl stays in solution because its solubility barely changes. The vapour flashed off is condensed and its heat recovered.
- Centrifuging and drying. KCl crystals are separated in centrifuges, washed and dried in a fluid-bed dryer. Fine product is compacted between rolls and crushed to granular MOP.
- Mother-liquor recycle. Cold mother liquor is reheated (using condensing vapour from the crystallisers and steam) and returned to the leaching tanks, closing the cycle.
Major engineering problems
Large volumes of salt tailings
Back-filling of mines, dry stacking, sale as road salt.
Energy for heating and cooling the brine
Heat recovery between flash crystallisers and mother-liquor heaters.
Corrosion by hot chloride brines
Rubber-lined, FRP and stainless equipment.
Caking of KCl
Anti-caking amines, granulation by compaction.
Import dependence (India)
Recovery of potash from sea bittern and molasses spent wash (potash-rich ash).
Notes
- Nutrient content is quoted as K₂O even though no K₂O is present.
- Flotation (amine collectors on sylvite) is the most common process in Canada.
- Carnallite is decomposed with water to leave KCl.
Practice questions
Muriate of potash is
- K₂SO₄
- KCl
- KNO₃
- K₂CO₃
Show the answer
Answer: B. KCl MOP ≈ 60 % K₂O.
Hot leaching separates KCl from NaCl because
- NaCl is insoluble
- KCl solubility rises sharply with temperature while NaCl’s hardly changes
- KCl is magnetic
- NaCl decomposes
Show the answer
Answer: B. KCl solubility rises sharply with temperature while NaCl’s hardly changes Basis of the process.
K₂O content of pure KCl is about
- 39 %
- 52 %
- 63 %
- 83 %
Show the answer
Answer: C. 63 % 94.2/(2 × 74.55) = 63.2 %.
SOP is preferred for
- rice
- chloride-sensitive crops like tobacco and potato
- wheat
- all crops
Show the answer
Answer: B. chloride-sensitive crops like tobacco and potato Chloride lowers quality.
The Mannheim process makes SOP from
- KCl + H₂SO₄
- K₂CO₃ + CaSO₄
- KOH + SO₂
- carnallite + water
Show the answer
Answer: A. KCl + H₂SO₄ Co-produces HCl.
Theory questions
How is muriate of potash obtained from sylvinite? (6 marks)
Show the model answer
Crushing; hot leaching with NaCl-saturated recycle brine at 100 °C (KCl dissolves); thickening/filtering off NaCl; vacuum cooling crystallisation of KCl; centrifuging, drying, compaction; mother liquor reheated and recycled. Alternatively flotation with amine collectors.
Give the grades and uses of potassic fertilisers. (3 marks)
Show the model answer
MOP (KCl) 60 % K₂O — general use; SOP (K₂SO₄) 50 % K₂O — chloride-sensitive crops; potassium magnesium sulphate; potassium nitrate (13-0-44) for horticulture.
Frequently asked questions
How is potassic fertilisers manufactured?
Muriate of potash (KCl) from sylvinite; sulphate of potash. Potassium fertilisers are mined, not synthesised. Sylvinite ore (a mixture of KCl and NaCl) is refined either by froth flotation or by hot leaching and crystallisation, exploiting the fact that KCl solubility rises steeply with temperature while that of NaCl hardly changes. The product, muriate of potash (MOP), contains about 60 % K₂O. Sulphate of potash (SOP, 50 % K₂O) is preferred for chloride-sensitive crops and is made from KCl by the Mannheim process or from natural sulphate minerals and bitterns. India imports all its MOP.
What raw materials are used to make potassic fertilisers?
Sylvinite ore (KCl + NaCl), carnallite (KCl·MgCl₂·6H₂O); Natural brines and sea bittern (India: schoenite route); Sulphuric acid (Mannheim SOP)
What catalyst is used in potassic fertilisers production?
no catalyst (selective dissolution and crystallisation)
What is potassic fertilisers used for?
Potassic fertiliser (≈ 95 %); KOH, K₂CO₃ manufacture; Industrial: drilling fluids, glass, soaps