IITIAN1997 STUDIO

Polymer Fundamentals

Raw materials, formation criteria, classification — from crude oil to plastics

Watch the animated P&ID →

Polymers are giant molecules built from many repeating units (monomers). Almost all synthetic polymers start from petrochemical building blocks — ethylene, propylene, butadiene, benzene, toluene and xylenes — obtained by steam cracking and catalytic reforming of naphtha and natural gas liquids. A molecule can form a polymer only if it is at least bifunctional: it must have a double bond (addition/chain-growth polymerisation) or two reactive groups such as –OH, –COOH, –NH₂ (condensation/step-growth polymerisation). Polymers are classified by origin, structure, mechanism, thermal behaviour and application.

Raw materials

  • Petrochemical feedstocks: naphtha, ethane/propane (NGL), refinery gases
  • Basic petrochemicals: ethylene, propylene, C₄ (butadiene), aromatics (BTX)
  • Natural sources: cellulose, natural rubber latex, starch, vegetable oils
  • Initiators/catalysts: peroxides, Ziegler–Natta, metallocenes, acids/bases

Products

  • Thermoplastics: PE, PP, PVC, PS, PET, nylons
  • Thermosets: phenol-formaldehyde, epoxy, unsaturated polyester, urea/melamine resins
  • Elastomers: NR, SBR, BR, NBR, neoprene, EPDM
  • Fibres: polyester, nylon, acrylic, polypropylene

Uses

  • Packaging, pipes, cables, automotive and electrical parts
  • Textiles and tyres
  • Adhesives, coatings and composites

Reactions

  • Addition (chain growth): n CH₂=CH₂ → –(CH₂–CH₂)ₙ– (initiation, propagation, termination)
  • Condensation (step growth): n HOOC–R–COOH + n HO–R′–OH → –(OC–R–COO–R′–O)ₙ– + 2n H₂O
  • Carothers equation: Xₙ = 1/(1 − p) (p = extent of reaction)
  • Vulcanisation: rubber chains cross-linked with sulphur bridges

Operating conditions

Degree of polymerisationDP = Mₙ / M(repeat unit), typically 10³–10⁵
Molecular weightMₙ (number average), M_w (weight average); PDI = M_w/Mₙ
Glass transition (T_g)Below T_g glassy; above it rubbery (PE −120 °C, PVC 80 °C, PS 100 °C)
CrystallinityHDPE 70–80 %, LDPE 40–50 %; raises density, stiffness and melting point
Polymerisation techniquesBulk, solution, suspension, emulsion, gas-phase, slurry, melt polycondensation

Process, step by step

  1. Crude oil and gas processing. Refineries distil crude oil; naphtha and LPG streams, together with ethane/propane separated from natural gas, are the feedstocks of the petrochemical industry.
  2. Cracking and reforming. Steam crackers break naphtha or ethane into olefins (ethylene, propylene, butadiene) and pyrolysis gasoline; catalytic reformers make aromatics (benzene, toluene, xylenes). These are the monomers or monomer precursors.
  3. Monomer synthesis. Further reactions give other monomers: vinyl chloride (ethylene + Cl₂), styrene (benzene + ethylene), terephthalic acid (p-xylene oxidation), ethylene glycol, caprolactam, phenol and acetone (cumene), acrylonitrile (propylene ammoxidation).
  4. Polymerisation. Monomers are polymerised by chain-growth (free radical, ionic, coordination with Ziegler–Natta or metallocene catalysts) or step-growth reactions in bulk, solution, suspension, emulsion, slurry or gas-phase reactors chosen to control heat removal and molecular weight.
  5. Compounding and processing. Polymer is degassed, mixed with additives (stabilisers, plasticisers, fillers, pigments), extruded and pelletised. Converters shape the pellets by extrusion, injection moulding, blow moulding, calendering, spinning (fibres) or compression moulding (thermosets) into products.

Major engineering problems

Heat removal in exothermic polymerisation

Suspension/emulsion/slurry media, cooled jackets and loop reactors, cycle-gas cooling (gas phase), controlled initiator dosing.

Viscosity rise (gel/Trommsdorff effect)

Solution/suspension processes, limiting conversion, good agitation.

Molecular-weight control

Chain-transfer agents (H₂ in Ziegler processes), temperature, catalyst choice.

Residual monomer and safety

Stripping/degassing (VCM is carcinogenic), closed systems.

Plastic waste

Recycling (mechanical, chemical), biodegradable polymers, extended producer responsibility.

Notes

  • Formation criterion: monomer functionality ≥ 2; a trifunctional monomer gives branched or cross-linked (network) polymers.
  • Initiators for free-radical polymerisation: benzoyl peroxide, AIBN, persulphates (emulsion), redox systems.
  • Number-average Mₙ = ΣNᵢMᵢ/ΣNᵢ; weight-average M_w = ΣNᵢMᵢ²/ΣNᵢMᵢ.

Practice questions

A monomer can form a linear polymer only if its functionality is at least

  1. 1
  2. 2
  3. 3
  4. 4
Show the answer

Answer: B. 2 Bifunctional.

Nylon-6,6 is an example of

  1. addition polymer
  2. condensation polymer
  3. natural polymer
  4. elastomer
Show the answer

Answer: B. condensation polymer Adipic acid + hexamethylenediamine.

Bakelite is a

  1. thermoplastic
  2. thermoset
  3. elastomer
  4. fibre
Show the answer

Answer: B. thermoset Cross-linked phenol–formaldehyde.

SBR is a

  1. homopolymer
  2. copolymer
  3. natural polymer
  4. thermoset
Show the answer

Answer: B. copolymer Styrene + butadiene.

Carothers equation gives Xₙ = 100 when p equals

  1. 0.90
  2. 0.99
  3. 0.999
  4. 0.5
Show the answer

Answer: B. 0.99 1/(1 − 0.99) = 100.

The main source of ethylene and propylene is

  1. catalytic reforming
  2. steam cracking
  3. fermentation
  4. coal tar
Show the answer

Answer: B. steam cracking Of naphtha or ethane.

Theory questions

Classify polymers with examples. (5 marks)

Show the model answer

Origin (natural, semi-synthetic, synthetic); mechanism (addition — PE, PVC; condensation — PET, nylon); structure (linear, branched, cross-linked); thermal behaviour (thermoplastic, thermoset); composition (homo-, copolymer); tacticity; application (plastics, elastomers, fibres, coatings).

Distinguish between addition and condensation polymerisation. (4 marks)

Show the model answer

Addition: monomers with double bonds add without loss of atoms via initiation–propagation–termination; high MW quickly; e.g. PE. Condensation: bifunctional monomers react with elimination of small molecules (H₂O, HCl); MW builds slowly, needs high conversion (Carothers); e.g. PET, nylon.

Frequently asked questions

How is polymer fundamentals manufactured?

Raw materials, formation criteria, classification — from crude oil to plastics. Polymers are giant molecules built from many repeating units (monomers). Almost all synthetic polymers start from petrochemical building blocks — ethylene, propylene, butadiene, benzene, toluene and xylenes — obtained by steam cracking and catalytic reforming of naphtha and natural gas liquids. A molecule can form a polymer only if it is at least bifunctional: it must have a double bond (addition/chain-growth polymerisation) or two reactive groups such as –OH, –COOH, –NH₂ (condensation/step-growth polymerisation). Polymers are classified by origin, structure, mechanism, thermal behaviour and application.

What raw materials are used to make polymer fundamentals?

Petrochemical feedstocks: naphtha, ethane/propane (NGL), refinery gases; Basic petrochemicals: ethylene, propylene, C₄ (butadiene), aromatics (BTX); Natural sources: cellulose, natural rubber latex, starch, vegetable oils; Initiators/catalysts: peroxides, Ziegler–Natta, metallocenes, acids/bases

What catalyst is used in polymer fundamentals production?

initiators and coordination catalysts (Ziegler–Natta, metallocene)

What is polymer fundamentals used for?

Packaging, pipes, cables, automotive and electrical parts; Textiles and tyres; Adhesives, coatings and composites

Watch the animated P&ID →