IITIAN1997 STUDIO

Ethanol (Industrial Alcohol)

Molasses fermentation, distillation and dehydration

Watch the animated P&ID →

In India, industrial alcohol is made mainly from cane molasses — the by-product of the sugar industry — and increasingly from cane juice and grains for the ethanol blending programme (E20). Diluted molasses is fermented by yeast to a "wash" of 8–10 % ethanol. Distillation in analyser and rectifier columns gives rectified spirit (≈ 95 % v/v, near the azeotrope), and molecular-sieve dehydration gives anhydrous fuel ethanol (99.8 %). The large volume of spent wash is the main environmental problem.

Raw materials

  • Cane molasses (≈ 45–50 % fermentable sugars; ≈ 230–250 L alcohol per tonne)
  • Cane juice / B-heavy molasses, or grain (maize, rice) after liquefaction and saccharification
  • Yeast (Saccharomyces cerevisiae), nutrients (urea, DAP), sulphuric acid (pH)
  • Water, steam, cooling water

Products

  • Rectified spirit (95 % v/v) and extra-neutral alcohol (potable)
  • Anhydrous / fuel ethanol (99.8 %) for petrol blending
  • By-products: CO₂ (liquefied/dry ice), fusel oil (amyl alcohols), spent wash → biogas, potash-rich ash, bio-compost

Uses

  • Fuel blending (E10–E20), solvent
  • Chemicals: acetic acid, ethyl acetate, acetaldehyde, ethylene (bio-PE)
  • Potable liquor, pharmaceuticals, sanitisers

Reactions

  • Inversion: C₁₂H₂₂O₁₁ + H₂O → C₆H₁₂O₆ (glucose) + C₆H₁₂O₆ (fructose) (invertase)
  • Fermentation: C₆H₁₂O₆ → 2C₂H₅OH + 2CO₂ ΔH ≈ −84 kJ/mol (Embden–Meyerhof pathway)
  • Theoretical yield: 0.511 kg ethanol per kg glucose (Gay-Lussac); practical 90–92 %
  • By-products: glycerol, succinic acid, higher alcohols (fusel oil), acetaldehyde

Operating conditions

WashMolasses diluted to 15–18 % sugar, pH 4.5–5.0
Fermentation30–35 °C, 30–48 h (batch) or continuous cascade; 8–10 % v/v ethanol
Yeast recycleMelle–Boinot: yeast separated by centrifuge and reused
DistillationAnalyser (beer) column + rectifier; azeotrope 95.6 % w/w (97.2 % v/v), 78.15 °C
DehydrationMolecular sieve 3 Å, PSA, to 99.8 %
Spent wash8–12 L per L alcohol, BOD 45 000–60 000 mg/L

Process, step by step

  1. Molasses preparation. Molasses is weighed, diluted with water to 15–18 % sugar, acidified with sulphuric acid to pH 4.5–5.0 (inhibiting bacteria) and supplemented with urea and DAP as yeast nutrients. Sludge may be removed by clarification.
  2. Yeast propagation. Pure yeast culture is propagated with aeration in yeast vessels of increasing size to obtain a large, vigorous inoculum (about 10 % of the fermenter volume).
  3. Fermentation. Diluted molasses and yeast are fermented in large closed fermenters (batch or continuous cascade) at 30–35 °C; yeast inverts sucrose and converts the sugars to ethanol and CO₂. The reaction is exothermic — plate heat exchangers on recirculation loops keep the temperature below 35 °C. CO₂ is scrubbed to recover entrained alcohol and may be bottled.
  4. Yeast separation. The fermented wash (8–10 % v/v) passes through centrifugal separators; concentrated yeast cream is recycled to the fermenters (Melle–Boinot), saving sugar and time.
  5. Analyser (beer) column. Wash is preheated and fed to the analyser (stripping) column heated by steam. Ethanol with water vapour leaves the top at about 40–50 % strength; the stillage (spent wash) leaves the bottom.
  6. Rectification. Vapours go to the rectifying column, where ethanol is concentrated to ≈ 95 % v/v (rectified spirit) and drawn off a tray near the top. Aldehydes (heads) are taken from the top; fusel oil (higher alcohols) is withdrawn as a side stream from the middle trays and decanted.
  7. Dehydration. Ethanol cannot pass the azeotrope by ordinary distillation. Superheated rectified spirit vapour passes through one of two molecular-sieve beds (3 Å zeolite) that adsorb water but not ethanol; the beds alternate between adsorption and regeneration under vacuum (pressure-swing adsorption). Anhydrous ethanol (99.8 %) is denatured and stored.
  8. Spent wash treatment. Spent wash is treated by biomethanation (biogas used as boiler fuel), then concentrated in multiple-effect evaporators and incinerated (potash-rich ash) or composted with press mud — zero liquid discharge.

Major engineering problems

Spent wash pollution (huge volume, high BOD/COD, dark colour)

Biomethanation, concentration and incineration, bio-composting, ZLD; reduce volume by high-gravity fermentation and recycle.

Contamination by bacteria (lactic, acetic)

Low pH, hygiene, antibiotics/biocides, clean-in-place.

Temperature rise during fermentation

External plate coolers; thermotolerant yeast.

Azeotrope limit

Molecular sieves (PSA); older azeotropic distillation with benzene/cyclohexane.

Molasses quality and availability

Blending feedstocks — cane juice, B-heavy molasses, grain.

Fire hazard

Flameproof plant, vapour recovery, bonding and earthing.

Notes

  • Gay-Lussac: 180 g glucose → 92 g ethanol + 88 g CO₂, i.e. 0.511 kg/kg; from sucrose 0.538 kg/kg.
  • Ethanol density 0.789 g/mL ⇒ 1 kg glucose → ≈ 0.648 L ethanol (theoretical).
  • Rectified spirit ≈ 94.5–95 % v/v; absolute alcohol ≥ 99.5 %.
  • India’s ethanol blending target: 20 % (E20) by 2025–26.

Practice questions

Ethanol concentration in fermented wash is about

  1. 1–2 %
  2. 8–10 %
  3. 40 %
  4. 95 %
Show the answer

Answer: B. 8–10 % Yeast is inhibited above ≈ 12–14 %.

Rectified spirit cannot exceed about 95.6 % w/w ethanol because of

  1. decomposition
  2. the ethanol–water azeotrope
  3. yeast inhibition
  4. corrosion
Show the answer

Answer: B. the ethanol–water azeotrope Minimum-boiling azeotrope at 78.15 °C.

Anhydrous ethanol for petrol blending is obtained by

  1. simple distillation
  2. molecular-sieve dehydration
  3. freezing
  4. adding NaOH
Show the answer

Answer: B. molecular-sieve dehydration 3 Å zeolite PSA.

Theoretical ethanol yield from glucose is

  1. 0.25 kg/kg
  2. 0.511 kg/kg
  3. 0.75 kg/kg
  4. 1.0 kg/kg
Show the answer

Answer: B. 0.511 kg/kg 92/180.

Fusel oil consists mainly of

  1. methanol
  2. higher (amyl) alcohols
  3. acetic acid
  4. glycerol
Show the answer

Answer: B. higher (amyl) alcohols Side draw from the rectifier.

The Melle–Boinot process involves

  1. yeast recycling by centrifuge
  2. continuous distillation
  3. acid hydrolysis
  4. spent-wash incineration
Show the answer

Answer: A. yeast recycling by centrifuge Saves sugar and time.

Theory questions

Describe the manufacture of ethanol from molasses with a flow diagram. (10 marks)

Show the model answer

Molasses diluted to 15–18 % sugar, pH 4.5 with H₂SO₄, urea/DAP nutrients; yeast propagation; fermentation 30–35 °C, 30–48 h to 8–10 % ethanol, CO₂ recovery; yeast separation and recycle; analyser column (vapour 40–50 %, spent wash); rectifier (RS 95 %, heads, fusel oil side draw); molecular-sieve dehydration to 99.8 %; spent wash biomethanation/incineration.

Why can’t absolute alcohol be obtained by ordinary distillation? How is it made? (4 marks)

Show the model answer

Ethanol and water form a minimum-boiling azeotrope (95.6 % w/w at 78.15 °C); vapour and liquid then have the same composition. Water is removed by molecular sieves (PSA), azeotropic distillation with an entrainer (benzene/cyclohexane), extractive distillation (ethylene glycol) or pervaporation membranes.

What is spent wash? How is it treated? (3 marks)

Show the model answer

Distillery stillage, 8–12 L per L alcohol, dark brown, BOD 45 000–60 000 mg/L, rich in potassium. Treated by biomethanation (biogas), multiple-effect evaporation and incineration (potash ash), composting with press mud, or concentration for ZLD.

Frequently asked questions

How is ethanol (industrial alcohol) manufactured?

Molasses fermentation, distillation and dehydration. In India, industrial alcohol is made mainly from cane molasses — the by-product of the sugar industry — and increasingly from cane juice and grains for the ethanol blending programme (E20). Diluted molasses is fermented by yeast to a "wash" of 8–10 % ethanol. Distillation in analyser and rectifier columns gives rectified spirit (≈ 95 % v/v, near the azeotrope), and molecular-sieve dehydration gives anhydrous fuel ethanol (99.8 %). The large volume of spent wash is the main environmental problem.

What raw materials are used to make ethanol (industrial alcohol)?

Cane molasses (≈ 45–50 % fermentable sugars; ≈ 230–250 L alcohol per tonne); Cane juice / B-heavy molasses, or grain (maize, rice) after liquefaction and saccharification; Yeast (Saccharomyces cerevisiae), nutrients (urea, DAP), sulphuric acid (pH); Water, steam, cooling water

What catalyst is used in ethanol (industrial alcohol) production?

yeast Saccharomyces cerevisiae

What is ethanol (industrial alcohol) used for?

Fuel blending (E10–E20), solvent; Chemicals: acetic acid, ethyl acetate, acetaldehyde, ethylene (bio-PE); Potable liquor, pharmaceuticals, sanitisers

Watch the animated P&ID →