Biomolecules, Michaelis–Menten kinetics with inhibition and deactivation, starch and cellulose hydrolysis, immobilised enzymes, media and sterilisation, oxygen transfer, Monod growth and chemostats, bioreactor types and downstream processing from the ASTU CHE1817PE31 syllabus (2018-19 scheme).
What is inside
- Enzyme kinetics and inhibition
- Sterilisation and oxygen transfer
- Cell growth, chemostats and bioreactors
- Downstream processing
Syllabus: ASTU CHE1817PE31 Biochemical Engineering, semester 7, 2018-19 scheme (programme elective 3). Official syllabus PDF.
Applications of bioprocesses in various fields
Topics: Applications of bioprocesses in industry, food, medicine, agriculture, energy and environment.
What bioprocesses make
A bioprocess uses living cells or their enzymes to make or transform materials. Traditional products: fermented foods and beverages (beer, wine, bread, curd, cheese, soy sauce), vinegar, ethanol. Industrial chemicals: ethanol for fuel (sugarcane molasses and grain in India; 2G ethanol from bagasse and straw), citric acid (Aspergillus niger), lactic acid for PLA, acetone–butanol (Clostridium), glutamic acid and lysine (Corynebacterium), 1,3-propanediol, succinic acid, xanthan gum.
Health care: antibiotics (penicillin by Penicillium chrysogenum, streptomycin, cephalosporins), vaccines, steroids by biotransformation, vitamins (B₂, B₁₂), and recombinant proteins — human insulin (E. coli, yeast), growth hormone, erythropoietin, interferons, monoclonal antibodies in CHO cells, enzymes for diagnostics. Enzymes as products: amylases, proteases (detergents), glucose isomerase (high-fructose syrup), lipases, cellulases, rennet (chymosin), penicillin acylase.
Agriculture and environment: biofertilisers (Rhizobium, Azotobacter), biopesticides (Bt toxin), single-cell protein; wastewater treatment (activated sludge, anaerobic digestion producing biogas), bioremediation of oil spills, biofiltration of odours, biomining (bioleaching of copper and gold). Energy: bioethanol, biodiesel by lipase transesterification, biogas, biohydrogen. Engineering aspects common to all: sterile operation, oxygen supply, heat removal, scale-up, and downstream purification.
- Foods, beverages, ethanol.
- Organic acids, amino acids, solvents.
- Antibiotics, vaccines, recombinant proteins, mAbs.
- Wastewater, biogas, bioremediation, biofuels.
Example: Theoretical ethanol from 1 t of glucose (C₆H₁₂O₆ → 2C₂H₅OH + 2CO₂).
- 180 g glucose → 2 × 46 = 92 g ethanol: yield 0.511 g/g.
- 1000 kg × 0.511 = 511 kg ethanol.
- At 789 kg/m³: 648 L. Real plants get 90–95 % of this.
Answer: 511 kg (about 650 L) theoretical.
Bioprocesses use cells or enzymes: fermented foods and beverages; bulk products (ethanol, citric, lactic and glutamic acids, solvents, gums); health care (antibiotics, vaccines, vitamins, recombinant insulin, monoclonal antibodies); industrial enzymes (amylases, proteases, glucose isomerase, lipases); agriculture (biofertilisers, Bt); environment (activated sludge, biogas, bioremediation, biofiltration, bioleaching); bioenergy. Common engineering issues: sterility, aeration, heat removal, scale-up, downstream processing.
- Ethanol from glucose: 0.511 g/g theoretical.
- Penicillin from Penicillium chrysogenum.
- Insulin made in recombinant E. coli and yeast.
- mAbs made in CHO cells.
- Biogas: about 60 % CH₄.
Key formulas
- C₆H₁₂O₆ → 2C₂H₅OH + 2CO₂
- Y_P/S(theory) = 92/180 = 0.511
Practice questions
Citric acid is produced industrially by
- E. coli
- Aspergillus niger
- CHO cells
- Bt
Show the answer
Answer: B. Aspergillus niger Fungal fermentation.
Monoclonal antibodies are commonly produced in
- yeast only
- CHO mammalian cells
- Clostridium
- algae
Show the answer
Answer: B. CHO mammalian cells Correct glycosylation.
Glucose isomerase is used to make
- ethanol
- high-fructose syrup
- penicillin
- biogas
Show the answer
Answer: B. high-fructose syrup Glucose ⇌ fructose.
Theoretical ethanol yield from glucose is
- 0.25 g/g
- 0.511 g/g
- 1 g/g
- 0.9 g/g
Show the answer
Answer: B. 0.511 g/g 92/180.
Activated sludge is a
- food process
- biological wastewater treatment
- enzyme
- antibiotic
Show the answer
Answer: B. biological wastewater treatment Aerobic treatment.
Theory questions
Compare chemical and biochemical processes. (5 marks)
Show the model answer
Biochemical processes use living cells or enzymes as catalysts; they operate at mild conditions (20–40 °C, near-neutral pH, atmospheric pressure), are highly specific (stereo- and regioselective), use renewable feedstocks and produce biodegradable wastes. However, reaction rates and product concentrations are low (dilute aqueous broths), sterility must be maintained, organisms can mutate or be contaminated, oxygen supply and heat removal limit scale, and downstream recovery is costly. Chemical processes use high temperatures and pressures with inorganic catalysts, achieve high rates and concentrations and are robust, but can be energy-intensive, less selective and produce hazardous wastes. Many modern processes combine both (chemoenzymatic synthesis).
Discuss the applications of bioprocess engineering in different fields with examples. (10 marks)
Show the model answer
Food and beverages: brewing, wine, baking yeast, dairy (yogurt, cheese with rennet), vinegar, enzymes in starch processing (amylases, glucoamylase, glucose isomerase for HFCS), single-cell protein. Chemicals and fuels: ethanol (molasses, grain, lignocellulose), butanol, organic acids (citric, lactic, gluconic, succinic), amino acids (glutamate, lysine), polysaccharides (xanthan, dextran), bioplastics (PLA, PHB), biodiesel. Pharmaceuticals: antibiotics (penicillin, streptomycin), vitamins, steroids by microbial transformation, vaccines, recombinant therapeutics (insulin, EPO, interferon, growth hormone, mAbs), diagnostic enzymes. Agriculture: biofertilisers, biopesticides (Bacillus thuringiensis), plant tissue culture. Environment: activated sludge and trickling filters, anaerobic digestion to biogas, bioremediation, biofiltration, biosorption of metals, bioleaching. Detergents and textiles: proteases, lipases, cellulases. Engineering roles: reactor design, sterilisation, mass and heat transfer, scale-up, control, downstream processing and validation (GMP).
Chemicals of life
Topics: Introduction and basic functions of lipids; sugars and polysaccharides; nucleotides, RNA and DNA; amino acids and proteins; hybrid biochemicals.
The four families of biomolecules
Lipids are water-insoluble molecules: fatty acids (saturated, unsaturated), triglycerides (energy storage — fats and oils), phospholipids (amphipathic: polar head, two non-polar tails; they form the bilayer of cell membranes), steroids (cholesterol, hormones) and waxes. Membranes control what enters and leaves cells, so they matter for product secretion and for extraction.
Carbohydrates: monosaccharides (glucose, fructose, galactose; pentoses ribose and xylose), disaccharides (sucrose, lactose, maltose), and polysaccharides — starch (amylose with α-1,4 links; amylopectin with α-1,6 branches) and glycogen as energy stores; cellulose (β-1,4 glucose, crystalline fibres, the most abundant organic polymer) and chitin as structural materials. The α vs β linkage decides digestibility and enzyme choice (amylases vs cellulases).
Nucleotides contain a base (A, G, C, T or U), a pentose sugar and phosphate. DNA is a double helix with complementary base pairs (A–T, G–C) holding the genetic code; RNA (single strand; mRNA, tRNA, rRNA) carries and translates it. Central dogma: DNA → (transcription) → mRNA → (translation on ribosomes) → protein. ATP is the energy currency; NAD(P)H carries reducing power. Proteins are chains of 20 amino acids joined by peptide bonds; their structure has four levels (primary sequence, secondary α-helix and β-sheet, tertiary fold, quaternary assembly); they act as enzymes, structural materials, transporters, antibodies and hormones. Denaturation by heat, pH or solvents destroys function. Hybrid biochemicals combine classes: glycoproteins (antibodies), lipoproteins, glycolipids, peptidoglycan of bacterial cell walls.
- Phospholipid bilayer membranes.
- Starch α-1,4/α-1,6; cellulose β-1,4.
- DNA → RNA → protein.
- Protein structure: primary to quaternary.
Example: A gene codes a protein of 300 amino acids. How many nucleotides are needed in the coding region, and what is the approximate protein mass?
- Three nucleotides per codon plus a stop codon: 3 × 301 = 903 nucleotides.
- Average residue mass ≈ 110 Da: 300 × 110 = 33 000 Da.
Answer: 903 nucleotides; about 33 kDa.
Lipids: fatty acids, triglycerides (storage), phospholipids (membrane bilayers), steroids. Carbohydrates: monosaccharides, disaccharides, polysaccharides — starch and glycogen (α links, storage), cellulose and chitin (β links, structure). Nucleic acids: nucleotides (base + pentose + phosphate), DNA double helix (A–T, G–C), RNA types; central dogma DNA → RNA → protein; ATP and NAD(P)H. Proteins: 20 amino acids, peptide bonds, four levels of structure, functions, denaturation. Hybrids: glycoproteins, lipoproteins, peptidoglycan.
- Amphipathic phospholipids self-assemble.
- Cellulose is crystalline and hard to hydrolyse.
- Codons are triplets.
- Enzymes are (mostly) proteins.
- Denaturation destroys tertiary structure.
Key formulas
- 3 nucleotides per codon
- protein mass ≈ 110 Da × residues
Practice questions
Cellulose consists of glucose linked by
- α-1,4
- β-1,4
- α-1,6
- peptide
Show the answer
Answer: B. β-1,4 Structural polymer.
In DNA, adenine pairs with
- cytosine
- thymine
- guanine
- uracil
Show the answer
Answer: B. thymine A–T.
Cell membranes are mainly
- triglycerides
- phospholipid bilayers
- cellulose
- DNA
Show the answer
Answer: B. phospholipid bilayers Amphipathic.
The α-helix is part of protein
- primary structure
- secondary structure
- quaternary structure
- none
Show the answer
Answer: B. secondary structure Local H-bonding.
The energy currency of cells is
- glucose
- ATP
- DNA
- cholesterol
Show the answer
Answer: B. ATP Adenosine triphosphate.
Theory questions
Describe the structure and biological functions of carbohydrates. (5 marks)
Show the model answer
Carbohydrates are polyhydroxy aldehydes or ketones and their polymers, empirical formula (CH₂O)ₙ. Monosaccharides: trioses to hexoses (glucose, fructose, galactose) and pentoses (ribose, deoxyribose, xylose), existing as ring forms with α and β anomers. Disaccharides formed by glycosidic bonds: sucrose (glucose + fructose), lactose (glucose + galactose), maltose (two glucose). Polysaccharides: storage — starch (amylose α-1,4, amylopectin with α-1,6 branches) in plants, glycogen in animals; structural — cellulose (β-1,4 glucose, hydrogen-bonded microfibrils) in plant cell walls, chitin in insect and fungal walls, peptidoglycan in bacteria. Functions: energy source (glucose oxidation gives ATP), energy storage, structural support, components of nucleotides (ribose), recognition and signalling (glycoproteins and glycolipids on cell surfaces). In bioprocessing they are the main carbon sources.
Describe the structure and functions of proteins. (10 marks)
Show the model answer
Proteins are polymers of the 20 L-α-amino acids, each with an amino group, a carboxyl group and a side chain (non-polar, polar, acidic, basic) on the α-carbon, joined by peptide bonds (–CO–NH–) formed by condensation. Primary structure: amino-acid sequence coded by the gene. Secondary: α-helices and β-pleated sheets stabilised by backbone hydrogen bonds. Tertiary: overall 3-D fold stabilised by hydrophobic interactions, H-bonds, ionic bonds and disulphide bridges. Quaternary: assembly of several polypeptide subunits (haemoglobin). Functions: catalysis (enzymes), structure (collagen, keratin), transport (haemoglobin, membrane carriers), defence (antibodies), regulation (insulin), motion (actin, myosin), storage. Properties: amphoteric, isoelectric point (lowest solubility, used in precipitation), denaturation by heat, extreme pH, organic solvents and shear — important in bioprocessing and purification.
Simple enzyme kinetics with one and two substrates
Topics: Michaelis–Menten kinetics; kinetics of reversible reactions; substrate activation and inhibition; multiple substrates on a single enzyme; factors influencing enzyme activity; enzyme deactivation.
Michaelis–Menten and its extensions
Mechanism: E + S ⇌ ES → E + P. With the quasi-steady-state (Briggs–Haldane) or rapid-equilibrium (Michaelis–Menten) assumption and total enzyme E₀ = E + ES: v = V_maxS/(K_m + S), V_max = k₂E₀, K_m = (k₋₁ + k₂)/k₁. At S ≪ K_m the rate is first order (V_max/K_m)S; at S ≫ K_m it is zero order V_max. Parameters come from Lineweaver–Burk (1/v vs 1/S), Eadie–Hofstee (v vs v/S), Hanes–Woolf (S/v vs S) plots or non-linear fitting. Reversible reactions: v = (V_fS/K_S − V_rP/K_P)/(1 + S/K_S + P/K_P), which vanishes at equilibrium.
Inhibition (I binding with constant K_i, α = 1 + I/K_i): competitive — K_m,app = αK_m, V_max unchanged; uncompetitive — both divided by α; non-competitive — V_max,app = V_max/α, K_m unchanged; mixed. Substrate inhibition at high S: v = V_maxS/(K_m + S + S²/K_SI), with a maximum at S = √(K_mK_SI). Substrate activation shows sigmoidal kinetics (allosteric enzymes, Hill equation v = V_maxSⁿ/(K + Sⁿ)). Two substrates (A + B → products): ordered, random or ping-pong mechanisms; for random rapid-equilibrium v = V_maxAB/(K_iaK_b + K_bA + K_aB + AB).
Activity depends on temperature (Arrhenius increase, then thermal deactivation above an optimum), pH (bell-shaped curve from ionisation of active-site groups), ionic strength, cofactors and shear. Deactivation is usually first order: E = E₀e^(−k_dt), half-life t½ = ln 2/k_d; k_d follows Arrhenius with a high activation energy, so enzymes lose activity fast above their optimum.
- v = V_maxS/(K_m + S).
- Lineweaver–Burk: slope K_m/V_max, intercept 1/V_max.
- Competitive: K_m up. Non-competitive: V_max down.
- Deactivation: E = E₀e^(−k_dt).
Example: Rates: S = 0.5, 1, 2, 4, 8 mM give v = 0.33, 0.50, 0.67, 0.80, 0.89 mM/min. Find K_m and V_max.
- 1/S: 2, 1, 0.5, 0.25, 0.125; 1/v: 3.03, 2.00, 1.49, 1.25, 1.12.
- Least-squares line: slope ≈ 1.02, intercept ≈ 0.99.
- V_max = 1/0.99 = 1.01 mM/min; K_m = 1.02 × 1.01 = 1.03 mM.
Answer: V_max ≈ 1.0 mM/min, K_m ≈ 1.0 mM.
Example: An enzyme has k_d = 0.02 h⁻¹ at 50 °C. What fraction of activity remains after 24 h, and what is its half-life?
- E/E₀ = e^(−0.02 × 24) = e^(−0.48) = 0.62.
- t½ = 0.693/0.02 = 34.7 h.
Answer: 62 % remains; half-life ≈ 35 h.
Michaelis–Menten: v = V_maxS/(K_m + S), V_max = k₂E₀, K_m = (k₋₁ + k₂)/k₁ (Briggs–Haldane). Linear plots: Lineweaver–Burk, Eadie–Hofstee, Hanes–Woolf. Reversible kinetics vanish at equilibrium. Inhibition: competitive (K_m × α), uncompetitive (both ÷ α), non-competitive (V_max ÷ α), substrate inhibition v = V_maxS/(K_m + S + S²/K_SI). Allosteric/sigmoidal kinetics (Hill). Two-substrate mechanisms: ordered, random, ping-pong. Effects of T, pH, ionic strength; first-order deactivation E = E₀e^(−k_dt).
- K_m = S at half V_max.
- Competitive inhibition overcome by excess S.
- Optimum S for substrate inhibition = √(K_mK_SI).
- Bell-shaped pH curve.
- Half-life = ln 2/k_d.
Key formulas
- v = V_maxS/(K_m + S)
- 1/v = (K_m/V_max)(1/S) + 1/V_max
- v = V_maxS/(αK_m + S) (competitive)
- E = E₀e^(−k_dt)
Practice questions
K_m equals the substrate concentration at which v equals
- V_max
- V_max/2
- 0
- 2V_max
Show the answer
Answer: B. V_max/2 Half saturation.
In a Lineweaver–Burk plot the y-intercept is
- K_m
- 1/V_max
- −1/K_m
- K_m/V_max
Show the answer
Answer: B. 1/V_max At 1/S = 0.
A competitive inhibitor
- lowers V_max
- raises apparent K_m
- lowers K_m
- has no effect
Show the answer
Answer: B. raises apparent K_m Same intercept.
Non-competitive inhibition lines on an L–B plot meet
- on the y-axis
- on the x-axis
- never (parallel)
- at the origin
Show the answer
Answer: B. on the x-axis Same K_m.
Enzyme deactivation is commonly
- zero order
- first order
- third order
- instantaneous
Show the answer
Answer: B. first order Exponential decay.
Theory questions
Derive the Michaelis–Menten equation using the quasi-steady-state assumption. (10 marks)
Show the model answer
Mechanism E + S ⇌(k₁, k₋₁) ES →(k₂) E + P. Rate v = dP/dt = k₂[ES]. Enzyme balance: [E₀] = [E] + [ES]. QSSA: d[ES]/dt = k₁[E][S] − (k₋₁ + k₂)[ES] ≈ 0 ⇒ k₁([E₀] − [ES])[S] = (k₋₁ + k₂)[ES] ⇒ [ES] = [E₀][S]/(K_m + [S]), K_m = (k₋₁ + k₂)/k₁. Hence v = k₂[E₀][S]/(K_m + [S]) = V_max[S]/(K_m + [S]). If k₂ ≪ k₋₁ (rapid equilibrium, Michaelis–Menten’s original), K_m → K_S = k₋₁/k₁, the dissociation constant. Limits: S ≪ K_m, v ≈ (V_max/K_m)S, first order; S ≫ K_m, v ≈ V_max, zero order. Validity: E₀ ≪ S₀. Evaluation by linearised plots or non-linear regression.
Explain the different types of reversible enzyme inhibition and how they are distinguished experimentally. (10 marks)
Show the model answer
Competitive: inhibitor resembles substrate and binds the free enzyme at the active site (E + I ⇌ EI); v = V_maxS/(K_m(1 + I/K_i) + S); V_max unchanged, apparent K_m increased; L–B lines intersect on the 1/v axis; overcome by high S (e.g. malonate on succinate dehydrogenase). Uncompetitive: inhibitor binds only ES; v = V_maxS/(K_m + S(1 + I/K_i)); both V_max and K_m reduced by the same factor; parallel L–B lines. Non-competitive (pure): binds E and ES equally at a different site; v = [V_max/(1 + I/K_i)]S/(K_m + S); V_max lowered, K_m unchanged; lines intersect on the −1/K_m axis (heavy metals). Mixed: different affinities for E and ES; lines intersect in the second quadrant. Experiment: measure initial rates at several S for several fixed I; plot 1/v vs 1/S; pattern identifies the type; replots of slopes or intercepts vs I give K_i. Substrate and product inhibition are special cases.
Applications of enzymes as catalysts
Topics: Hydrolysis of starch and cellulose by hydrolytic enzymes; medical applications; non-hydrolytic enzymes.
Enzymes at work
Starch processing is the largest enzyme industry. Liquefaction: thermostable α-amylase (Bacillus licheniformis) at 95–105 °C, pH 6 randomly cleaves α-1,4 bonds of gelatinised starch to dextrins. Saccharification: glucoamylase (Aspergillus niger) at 60 °C, pH 4.5 removes glucose units from non-reducing ends, also slowly breaking α-1,6 branches (helped by pullulanase), giving 95–97 % glucose syrup. Isomerisation: immobilised glucose isomerase converts glucose to fructose (42 % HFCS; chromatography enriches to 55 %). β-Amylase gives maltose syrups for brewing.
Cellulose hydrolysis is harder because cellulose is crystalline and shielded by lignin and hemicellulose; biomass is first pretreated (dilute acid, steam explosion, alkali, ammonia fibre expansion). Cellulase systems (Trichoderma reesei) act synergistically: endoglucanases cut internal bonds, exoglucanases (cellobiohydrolases) release cellobiose from chain ends, and β-glucosidase splits cellobiose to glucose (relieving product inhibition). Products feed second-generation ethanol. Other hydrolases: proteases in detergents, leather and cheese (chymosin), lipases in detergents and fats, pectinases for fruit-juice clarification, lactase for lactose-free milk, penicillin acylase to make 6-APA for semi-synthetic penicillins.
Medical uses: diagnostics (glucose oxidase and peroxidase in blood-glucose strips; enzyme-linked immunoassays), therapeutics (streptokinase and tissue plasminogen activator to dissolve clots, asparaginase for leukaemia, digestive enzymes, DNase for cystic fibrosis), and enzyme replacement therapy. Non-hydrolytic enzymes: glucose isomerase, oxidoreductases (glucose oxidase in food preservation, alcohol dehydrogenase), transferases, lyases (aspartase for L-aspartic acid), nitrile hydratase (acrylamide from acrylonitrile, Nitto process), ketoreductases and transaminases for chiral drug intermediates.
- α-Amylase liquefies; glucoamylase saccharifies.
- Cellulases: endo, exo, β-glucosidase in synergy.
- Medical: diagnostics and clot busters.
- Non-hydrolytic: isomerase, oxidases, nitrile hydratase.
Example: 1000 kg of starch (as anhydroglucose) is fully hydrolysed. What mass of glucose forms?
- (C₆H₁₀O₅)ₙ + nH₂O → nC₆H₁₂O₆: 162 → 180.
- 1000 × 180/162 = 1111 kg.
Answer: 1111 kg glucose: water adds 11 % to the mass.
Starch: liquefaction with thermostable α-amylase (95–105 °C), saccharification with glucoamylase (+ pullulanase), isomerisation with immobilised glucose isomerase to HFCS. Cellulose: pretreatment, then synergistic endoglucanase, exoglucanase and β-glucosidase (T. reesei) for 2G ethanol. Other hydrolases: proteases, lipases, pectinases, lactase, penicillin acylase. Medical: diagnostic oxidases, streptokinase, tPA, asparaginase. Non-hydrolytic: isomerases, oxidoreductases, lyases, nitrile hydratase (acrylamide).
- Starch hydrolysis adds water: 162 → 180.
- β-glucosidase relieves cellobiose inhibition.
- Lignin blocks cellulase access.
- Glucose strips use glucose oxidase.
- Nitrile hydratase makes acrylamide.
Key formulas
- (C₆H₁₀O₅)ₙ + nH₂O → nC₆H₁₂O₆
- glucose ⇌ fructose (K ≈ 1 at 60 °C)
Practice questions
Liquefaction of starch uses
- glucoamylase
- thermostable α-amylase
- cellulase
- lipase
Show the answer
Answer: B. thermostable α-amylase At ~105 °C.
Glucose isomerase produces
- maltose
- fructose
- ethanol
- lactose
Show the answer
Answer: B. fructose HFCS.
β-Glucosidase converts
- starch to dextrin
- cellobiose to glucose
- glucose to fructose
- fat to glycerol
Show the answer
Answer: B. cellobiose to glucose Last step of cellulose hydrolysis.
Streptokinase is used to
- make cheese
- dissolve blood clots
- clarify juice
- make bread
Show the answer
Answer: B. dissolve blood clots Thrombolytic.
Pretreatment of lignocellulose is needed because
- cellulose is soluble
- lignin and crystallinity limit enzyme access
- it adds sugar
- it kills enzymes
Show the answer
Answer: B. lignin and crystallinity limit enzyme access Opens the structure.
Theory questions
What are the advantages of enzymes as industrial catalysts? (5 marks)
Show the model answer
High specificity (substrate, regio- and stereo-) gives fewer by-products and enables chiral synthesis; very high activity under mild conditions (ambient temperature, neutral pH, atmospheric pressure), saving energy and protecting heat-sensitive materials; biodegradable and non-toxic, so environmentally friendly; can be produced cheaply by fermentation and improved by protein engineering; reactions can be performed in water. Limitations: sensitivity to temperature, pH, solvents and inhibitors, limited stability, cost of purification, possible allergenicity, need for cofactors in some reactions — partly overcome by immobilisation, enzyme engineering and use of thermostable enzymes from extremophiles.
Describe the enzymatic hydrolysis of starch and cellulose. (10 marks)
Show the model answer
Starch (amylose α-1,4; amylopectin α-1,4 with α-1,6 branches): slurry 30–35 % dry solids, pH 6, Ca²⁺ added; jet-cooked at 105 °C with thermostable α-amylase for gelatinisation and liquefaction to dextrins (DE 10–15); cooled to 60 °C, pH 4.5; glucoamylase (with pullulanase to cut α-1,6) for 48–72 h to DE 95–98; refining (filtration, carbon, ion exchange); optionally isomerisation on immobilised glucose isomerase (pH 7.5–8, 55–60 °C, Mg²⁺) to 42 % fructose and chromatographic enrichment. Cellulose (β-1,4, crystalline, embedded in lignin and hemicellulose): pretreatment (dilute acid, steam explosion, alkali, AFEX) to remove hemicellulose/lignin and reduce crystallinity; cellulase cocktail at 45–50 °C, pH 4.8: endoglucanases create chain ends, cellobiohydrolases release cellobiose, β-glucosidase converts cellobiose to glucose; problems: product inhibition (cellobiose, glucose), non-productive binding to lignin, high enzyme cost; solutions: simultaneous saccharification and fermentation (SSF), enzyme recycling, engineered enzymes.
Immobilised enzyme technology
Topics: Brief overview of immobilised enzymes: methods, kinetics and applications.
Fixing enzymes so they can be reused
Free enzymes are lost with the product. Immobilising them on or in a solid allows reuse, continuous operation in packed beds, easy separation of product, and often better stability. Methods: adsorption on carriers (ion-exchange resins, alumina, activated carbon — simple but enzyme can leach); covalent binding to activated supports (glutaraldehyde, CNBr-activated agarose, epoxy resins — stable, some activity loss); entrapment in gels (calcium alginate, polyacrylamide, κ-carrageenan) or fibres; microencapsulation; and crosslinking without a carrier (crosslinked enzyme aggregates and crystals, CLEAs/CLECs).
Immobilisation changes apparent kinetics. Partition effects (charged supports attract or repel substrate) change local concentrations; external film diffusion and internal pore diffusion lower the observed rate. For internal diffusion with Michaelis–Menten kinetics the effectiveness factor η depends on the Thiele modulus φ = L√(V_max/(K_mD_e)) and on S/K_m; at large φ, η ≈ 1/φ, and the apparent K_m rises. The Damköhler number compares reaction rate with external mass transfer.
Industrial examples: glucose isomerase (largest; packed beds running months), penicillin G acylase for 6-APA, aminoacylase for L-amino-acid resolution (Tanabe, first industrial process, 1969), lactase for milk, nitrile hydratase cells for acrylamide, lipases for biodiesel and structured fats, enzyme electrodes in biosensors. Reactors: packed-bed (plug flow), fluidised bed, stirred tank with retained particles, membrane reactors.
- Adsorption, covalent, entrapment, encapsulation, crosslinking.
- Reuse and continuous operation.
- Diffusion: η = f(φ); apparent K_m rises.
- Glucose isomerase, penicillin acylase, aminoacylase.
Example: Immobilised glucose isomerase in a packed bed loses activity with half-life 100 days. The bed is replaced when activity is 12.5 % of initial. How long does one charge last?
- Activity fraction after n half-lives = 0.5ⁿ = 0.125 ⇒ n = 3.
- Life = 3 × 100 = 300 days.
- Flow is reduced over time to keep conversion constant.
Answer: About 300 days per charge.
Immobilised enzymes allow reuse, continuous packed-bed operation, easy product separation and improved stability. Methods: adsorption, covalent binding (glutaraldehyde, CNBr, epoxy), entrapment (alginate, polyacrylamide, carrageenan), microencapsulation, carrier-free crosslinking (CLEA). Kinetic effects: partitioning, external film and internal pore diffusion; effectiveness factor vs Thiele modulus φ = L√(V_max/K_mD_e); apparent K_m rises. Applications: glucose isomerase, penicillin acylase, aminoacylase, lactase, nitrile hydratase, lipases, biosensors; packed, fluidised and membrane reactors.
- Covalent binding resists leaching.
- Entrapment in Ca-alginate beads is simple.
- Large φ means diffusion control.
- Tanabe aminoacylase was the first industrial use.
- Activity decay requires flow adjustment.
Key formulas
- φ = L√(V_max/(K_mD_e))
- η = observed rate/intrinsic rate
- Da = V_max/(k_LaS_b)
Practice questions
A major advantage of immobilisation is
- lower stability
- reuse of the enzyme
- higher cost always
- no diffusion
Show the answer
Answer: B. reuse of the enzyme Continuous use.
Calcium alginate is used for
- covalent binding
- entrapment
- adsorption
- crosslinking only
Show the answer
Answer: B. entrapment Gel beads.
Internal diffusion limitation makes apparent K_m
- smaller
- larger
- unchanged
- negative
Show the answer
Answer: B. larger Substrate depleted inside.
The first industrial immobilised-enzyme process used
- glucose isomerase
- aminoacylase
- lipase
- cellulase
Show the answer
Answer: B. aminoacylase Tanabe, 1969.
Glutaraldehyde is used for
- adsorption
- covalent coupling or crosslinking
- entrapment
- sterilisation
Show the answer
Answer: B. covalent coupling or crosslinking Reacts with amino groups.
Theory questions
Explain the effect of mass transfer on the kinetics of immobilised enzymes. (5 marks)
Show the model answer
Substrate must diffuse from the bulk liquid through an external film to the particle surface (external mass transfer) and then through pores to the enzyme (internal diffusion), while reaction consumes it. If diffusion is slow, substrate concentration at the enzyme is lower than in the bulk and the observed rate falls. External limitation is described by the Damköhler number Da = V_max/(k_Las); internal limitation by the Thiele modulus φ = L√(V_max/(K_mD_e)) and the effectiveness factor η (observed/intrinsic rate), η ≈ 1/φ for large φ. Consequences: apparent K_m increases, kinetics appear first-order over a wider range, the apparent activation energy halves under strong diffusion control, and the enzyme seems more stable. Remedies: smaller particles, higher flow velocity, thinner enzyme layers, porous supports.
Describe methods of enzyme immobilisation with their merits and demerits. (10 marks)
Show the model answer
Adsorption on alumina, silica, carbon, ion-exchange resins: simple, cheap, little activity loss, support reusable; but binding is weak and enzyme leaches with pH, ionic strength or temperature changes. Covalent binding through functional groups (–NH₂, –COOH, –SH) to activated supports (CNBr-agarose, glutaraldehyde-aminated silica, epoxy-acrylic beads): strong, no leaching, high stability; but harsh chemistry may damage the active site, support not reusable, costlier. Entrapment in gel lattices (Ca-alginate, polyacrylamide, κ-carrageenan) or fibres: mild, applicable to whole cells; but enzyme can leak through large pores, diffusion limits, only small substrates. Microencapsulation in semipermeable membranes (nylon, liposomes): large enzyme loading; diffusion and fragility problems. Crosslinking with glutaraldehyde to form CLEAs or CLECs: carrier-free, high activity per volume; mechanical weakness. Choice depends on enzyme, substrate size, reactor type, cost and regulatory needs.
Basic fermentation engineering
Topics: Media preparation; culture; sterilisation; manufacture of biochemical products.
Media, inoculum and sterilisation
A fermentation medium must supply carbon and energy (glucose, sucrose, molasses, starch hydrolysates, glycerol, methanol), nitrogen (ammonium salts, urea, corn steep liquor, soybean meal, yeast extract), phosphorus and sulphur, minerals (K, Mg, Fe, Zn, Mn, Cu, Co), growth factors (vitamins, amino acids), precursors (phenylacetic acid for penicillin G), inducers, buffers and antifoam. Elemental balances from the biomass formula (≈ CH₁.₈O₀.₅N₀.₂) and yields fix the minimum amounts. Industrial media use cheap complex materials; defined media are used for recombinant proteins and research.
Culture development: a pure stock culture (lyophilised or frozen) is revived and scaled up through shake flasks and seed fermenters, each about 5–10 % of the next volume, to give a large, active inoculum in the exponential phase. Aseptic technique and strain stability are essential.
Sterilisation kills contaminating organisms in medium, air and equipment. Medium: batch (in the fermenter with steam, heat-up, hold at 121 °C, cool) or continuous high-temperature short-time (140 °C for seconds, less nutrient damage). Death is first order: N = N₀e^(−kt), with k = A e^(−E/RT); design uses the Del factor ∇ = ln(N₀/N), typically aiming at N = 10⁻³ (one batch in a thousand contaminated). Because spore death has a higher activation energy (~280 kJ/mol) than vitamin destruction (~100 kJ/mol), higher temperature for shorter time preserves the medium. Air is sterilised by depth or membrane (0.2 µm) filtration. Manufacture: e.g. penicillin (fed-batch, lactose or glucose feed, phenylacetic acid, aerobic, 25 °C, 6–8 days), citric acid, ethanol, baker’s yeast (fed-batch to avoid the Crabtree effect).
- Carbon, nitrogen, minerals, growth factors, precursors.
- Inoculum 5–10 % in exponential phase.
- Del factor ∇ = ln(N₀/N).
- HTST protects nutrients.
Example: A 10 m³ batch contains 10⁶ spores/mL. With k = 2.5 min⁻¹ at 121 °C and a design risk of 10⁻³, find the Del factor and holding time.
- N₀ = 10⁶ × 10⁷ mL = 10¹³.
- ∇ = ln(10¹³/10⁻³) = ln 10¹⁶ = 36.8.
- Holding time (ignoring heat-up and cool-down) = 36.8/2.5 = 14.7 min.
Answer: ∇ = 36.8; about 15 min at 121 °C.
Media supply carbon and energy, nitrogen, P, S, minerals, growth factors, precursors, inducers, buffers and antifoam; elemental balances and yields size them; complex vs defined media. Inoculum built up through flasks and seed vessels (5–10 %). Sterilisation: first-order death N = N₀e^(−kt), Arrhenius k; Del factor ∇ = ln(N₀/N); batch vs continuous HTST; air by filtration. Products: penicillin (fed-batch with precursor), citric acid, ethanol, baker’s yeast (fed-batch, Crabtree effect).
- Corn steep liquor is a cheap N source.
- Phenylacetic acid is the penicillin G precursor.
- Design risk usually 10⁻³ per batch.
- Spore death E ≈ 280 kJ/mol.
- Air filtered through 0.2 µm.
Key formulas
- N = N₀e^(−kt)
- ∇ = ln(N₀/N) = ∫k dt
- k = A e^(−E/RT)
Practice questions
The Del factor is
- ln(N₀/N)
- N₀/N
- kN
- N/N₀
Show the answer
Answer: A. ln(N₀/N) Design criterion.
HTST continuous sterilisation is preferred because
- it uses less steam only
- it destroys fewer nutrients for the same kill
- it is batch
- it needs no heat
Show the answer
Answer: B. it destroys fewer nutrients for the same kill Higher E for spore death.
Fermentation air is usually sterilised by
- UV
- filtration
- steam only
- chlorine
Show the answer
Answer: B. filtration Depth or membrane filters.
Baker’s yeast is grown fed-batch to avoid
- contamination
- the Crabtree effect (ethanol formation)
- oxygen excess
- foaming
Show the answer
Answer: B. the Crabtree effect (ethanol formation) Low sugar keeps respiration.
Inoculum size is typically
- 0.01 %
- 5–10 %
- 50 %
- 100 %
Show the answer
Answer: B. 5–10 % Shortens lag.
Theory questions
Discuss the requirements of a fermentation medium. (5 marks)
Show the model answer
A medium must supply all elements needed for growth and product formation in the right proportions: carbon and energy source (sugars, molasses, starch, oils, methanol); nitrogen (ammonia, ammonium salts, urea, corn steep liquor, soybean meal, peptones); phosphorus and sulphur; macro-minerals (K, Mg, Ca) and trace elements (Fe, Zn, Mn, Cu, Co, Mo); growth factors (vitamins, amino acids); precursors and inducers for specific products; buffers to control pH; antifoam agents; water of suitable quality. Industrial media should be cheap, consistent, readily available, give high yield and productivity, allow easy sterilisation and downstream processing, and produce little waste. Composition is designed from elemental balances using biomass and product yields and optimised by statistical methods.
Explain the design of a batch sterilisation cycle using the Del factor. (10 marks)
Show the model answer
Thermal death of spores is first order: dN/dt = −kN, with k = A exp(−E/RT). Integrating over the whole cycle: ln(N₀/N) = ∇ = ∫₀ᵗ k dt = ∇_heating + ∇_holding + ∇_cooling. Steps: (1) N₀ = spore count × volume; (2) choose N (e.g. 10⁻³, one contaminated batch in a thousand); ∇_total = ln(N₀/N); (3) from the heating profile (steam sparging: linear; jacket: exponential; electrical: linear) integrate k(T(t)) numerically to get ∇_heating; similarly ∇_cooling; (4) ∇_holding = ∇_total − ∇_heating − ∇_cooling; (5) holding time = ∇_holding/k(T_hold). Large vessels heat slowly so their heat-up and cool-down contribute much of the kill but also destroy nutrients; hence continuous HTST sterilisation (direct steam injection or plate exchangers, 140 °C, 30–120 s, flash cooling) is used at scale. Scale-up must keep ∇ constant, so larger volumes (higher N₀) need longer holding.
Transport phenomena in bioprocesses
Topics: Gas–liquid mass transfer in cellular systems; heat transfer.
Oxygen and heat
Oxygen is sparingly soluble (≈ 7–8 mg/L from air at 25–30 °C, less in broth) yet aerobic cultures consume it at 10–100 mmol/L·h. Oxygen passes from bubble to cell through several resistances; the gas–liquid film on the liquid side usually dominates. Oxygen transfer rate OTR = k_La(C* − C_L); oxygen uptake rate OUR = q_O₂X. At steady state OTR = OUR, and C_L must stay above the critical dissolved oxygen (often 10–30 % of saturation) for growth not to be limited.
k_La depends on power per volume and gas velocity: k_La = a(P/V)^α u_s^β (Van’t Riet: coalescing broth k_La ≈ 0.026(P/V)^0.4 u_s^0.5 s⁻¹ with SI units). It is raised by faster agitation (smaller bubbles, more area), more air, better spargers, oxygen-enriched air or higher pressure (raises C*). Measurement: dynamic gassing-out (stop air, watch C_L fall at rate OUR, restart and fit d C_L/dt = k_La(C* − C_L) − OUR), sulphite oxidation (chemical), and gas balancing across the fermenter. Viscous mycelial broths and antifoam lower k_La.
Heat: cells release metabolic heat roughly proportional to oxygen consumption, about 460 kJ per mol O₂ (Cooney), plus agitation power. Q_met + Q_agit = UAΔT_lm through jackets and coils, with cooling water usually only 10–15 K below the 30–37 °C culture temperature — small driving force, so large fermenters need internal coils or external loops. Heat removal and oxygen transfer together often limit fermenter scale and cell density.
- OTR = k_La(C* − C_L) = OUR at steady state.
- C* ≈ 7 mg/L from air.
- k_La ∝ (P/V)^α u_s^β.
- Q_met ≈ 460 kJ/mol O₂.
Example: A culture of 20 g/L cells uses 8 mmol O₂/g·h. With C* = 7 mg/L and C_L kept at 1.5 mg/L, what k_La is needed? Estimate the heat released per m³.
- OUR = 8 × 20 = 160 mmol/L·h = 5.12 g/L·h = 5120 mg/L·h.
- k_La = 5120/(7 − 1.5) = 931 h⁻¹ (0.26 s⁻¹) — high; needs strong agitation or enriched air.
- Heat = 160 mol/m³·h × 460 kJ/mol = 73 600 kJ/m³·h ≈ 20 kW/m³.
Answer: k_La ≈ 930 h⁻¹; about 20 kW/m³ of heat to remove.
Oxygen: low solubility (C* ≈ 7 mg/L), resistances in series with the liquid film dominant; OTR = k_La(C* − C_L), OUR = q_O₂X; keep C_L above the critical level. k_La correlations with P/V and superficial gas velocity; measurement by dynamic gassing-out, sulphite oxidation, gas balance; increase by agitation, aeration, enrichment, pressure. Heat: metabolic heat ≈ 460 kJ/mol O₂ plus agitation; small ΔT to cooling water; jackets, coils, external exchangers.
- OTR is often the scale-up limit.
- Mycelial broths have low k_La.
- Pressure raises C*.
- Dynamic method: OUR from the slope when air is off.
- Cooling area grows slower than volume on scale-up.
Key formulas
- OTR = k_La(C* − C_L)
- OUR = q_O₂X
- k_La = 0.026(P/V)^0.4 u_s^0.5
- Q_met ≈ 0.46 kJ/mmol O₂ × OUR
Practice questions
The main resistance to oxygen transfer is usually
- gas film
- liquid film around bubbles
- cell membrane
- bulk gas
Show the answer
Answer: B. liquid film around bubbles Low solubility.
Saturation O₂ in water from air at 30 °C is about
- 70 mg/L
- 7 mg/L
- 0.7 mg/L
- 700 mg/L
Show the answer
Answer: B. 7 mg/L Very low.
Metabolic heat is about
- 46 kJ/mol O₂
- 460 kJ/mol O₂
- 4600 kJ/mol O₂
- zero
Show the answer
Answer: B. 460 kJ/mol O₂ Cooney.
k_La increases with
- lower agitation
- higher power per volume
- antifoam
- higher viscosity
Show the answer
Answer: B. higher power per volume Smaller bubbles.
Using pure oxygen instead of air raises
- k_La
- C*
- OUR
- viscosity
Show the answer
Answer: B. C* Driving force.
Theory questions
Explain heat generation and heat removal in fermenters. (5 marks)
Show the model answer
Heat sources: metabolic heat from cell growth (roughly proportional to oxygen consumption, about 460 kJ per mol O₂ for aerobic cultures), mechanical power input from agitation, and heat from sparged gases; losses through evaporation and walls are small. Q = Q_met + Q_agit − Q_evap. Heat removal by cooling water in jackets, internal coils or external heat exchangers: Q = UAΔT_lm. Difficulties: the culture temperature (30–37 °C) is close to cooling-water temperature, so the driving force is small; jacket area per volume decreases on scale-up (area ∝ D², volume ∝ D³); fouling and viscous broths reduce U. Solutions: internal coils, chilled water, external loops, operating at lower cell density or using thermotolerant organisms. Heat removal and oxygen transfer often jointly limit fermenter size.
Discuss oxygen transfer in aerobic fermentation and methods for measuring k_La. (10 marks)
Show the model answer
Path: bulk gas → gas film → interface → liquid film → bulk liquid → liquid film around cell/floc → cell membrane → reaction site. With small cells well dispersed, the liquid film at the bubble dominates: OTR = k_La(C* − C_L). Requirement OUR = q_O₂X must be met with C_L > C_crit. Factors on k_La: agitation (power, impeller type), gas flow (superficial velocity), sparger, bubble coalescence (salts, antifoam, surfactants), broth rheology, temperature, pressure. Measurement: (1) sulphite oxidation: Na₂SO₃ oxidised by O₂ with Cu²⁺ catalyst; rate by titration gives k_La (non-biological, overestimates); (2) static gassing-out: deoxygenate with N₂, then aerate and record C_L(t): ln[(C* − C₀)/(C* − C_L)] = k_Lat; (3) dynamic method in the actual fermentation: switch off air, C_L falls at slope −OUR; switch on and fit dC_L/dt = k_La(C* − C_L) − OUR; (4) gas balance: OTR from inlet/outlet O₂ analysis with C_L measured, k_La = OTR/(C* − C_L). Probes: polarographic or optical DO sensors with response time correction.
Kinetics of cell culture
Topics: Reaction kinetics of balanced growth; death kinetics.
Growth phases and Monod
In batch culture cells pass through lag (adaptation), exponential (balanced) growth, deceleration, stationary and death phases. During balanced growth all cell components increase at the same rate: dX/dt = μX, so X = X₀e^(μt) and the doubling time is t_d = ln 2/μ. Typical μ_max: bacteria 0.5–2 h⁻¹, yeast 0.2–0.5 h⁻¹, mammalian cells 0.02–0.05 h⁻¹.
Monod kinetics relates μ to the limiting substrate: μ = μ_maxS/(K_s + S), with K_s often a few mg/L for sugars. Other models: substrate inhibition (Andrews), product inhibition (ethanol: μ = μ_max(1 − P/P_max)ⁿ S/(K_s + S)), Contois for high density. Yields: Y_X/S = −ΔX/ΔS; substrate consumption includes maintenance: q_S = μ/Y_X/S,true + m_S (Pirt). Product formation (Luedeking–Piret): q_P = αμ + β — growth-associated (α, ethanol), non-growth-associated (β, many antibiotics), or mixed (lactic acid).
Death is usually first order: dX_v/dt = −k_dX_v, so in the death phase viable cells fall exponentially; with growth and death together the net rate is (μ − k_d)X. Thermal death of spores (sterilisation) follows the same law with strongly temperature-dependent k_d. Continuous culture (chemostat) gives balanced growth at μ = D, allowing measurement of kinetic constants: S = K_sD/(μ_max − D), X = Y(S₀ − S); washout at D > μ_maxS₀/(K_s + S₀).
- Lag, exponential, deceleration, stationary, death.
- X = X₀e^(μt); t_d = ln 2/μ.
- Monod μ = μ_maxS/(K_s + S).
- Luedeking–Piret q_P = αμ + β; death dX/dt = −k_dX.
Example: E. coli has t_d = 30 min. Starting from 10⁶ cells/mL, how long to reach 10⁹ cells/mL in exponential growth?
- μ = ln 2/0.5 h = 1.386 h⁻¹.
- t = ln(10⁹/10⁶)/μ = 6.91/1.386.
- = 4.98 h (≈ 10 doublings).
Answer: About 5 hours.
Example: Chemostat: μ_max = 0.5 h⁻¹, K_s = 0.2 g/L, S₀ = 20 g/L, Y = 0.5, D = 0.3 h⁻¹. Find S, X and productivity.
- S = 0.2 × 0.3/(0.5 − 0.3) = 0.3 g/L.
- X = 0.5 × (20 − 0.3) = 9.85 g/L.
- DX = 2.96 g/L·h; washout at D = 0.5 × 20/20.2 = 0.495 h⁻¹.
Answer: X = 9.85 g/L, productivity ≈ 3 g/L·h.
Batch growth: lag, exponential (balanced) growth X = X₀e^(μt), t_d = ln 2/μ, deceleration, stationary, death. Monod μ = μ_maxS/(K_s + S); inhibition models (Andrews, product inhibition). Yields Y_X/S, maintenance (Pirt q_S = μ/Y_G + m), product kinetics (Luedeking–Piret: growth-associated, non-growth-associated, mixed). Death: dX/dt = −k_dX. Chemostat: μ = D, S = K_sD/(μ_max − D), X = Y(S₀ − S), washout and optimum productivity.
- Mammalian cells double in about a day.
- Antibiotics are mostly non-growth-associated.
- Maintenance matters at low growth rates.
- Chemostat measures μ vs S directly.
- Productivity peaks just below washout.
Key formulas
- μ = μ_maxS/(K_s + S)
- t_d = ln 2/μ
- q_P = αμ + β
- D_crit = μ_maxS₀/(K_s + S₀)
Practice questions
In the exponential phase, growth rate is
- zero
- proportional to biomass
- constant in g/L·h
- negative
Show the answer
Answer: B. proportional to biomass dX/dt = μX.
K_s in Monod is the S at which μ equals
- μ_max
- μ_max/2
- 0
- 2μ_max
Show the answer
Answer: B. μ_max/2 Like K_m.
A non-growth-associated product is formed mainly in
- lag phase
- stationary phase
- exponential phase only
- never
Show the answer
Answer: B. stationary phase β term.
In a chemostat at steady state
- μ = D
- μ = 0
- D = 0
- X = S
Show the answer
Answer: A. μ = D Growth balances washout.
Death kinetics are usually
- zero order
- first order
- second order
- Monod
Show the answer
Answer: B. first order Exponential decline.
Theory questions
Explain growth-associated and non-growth-associated product formation. (5 marks)
Show the model answer
Luedeking–Piret model: q_P = αμ + β, i.e. dP/dt = α dX/dt + βX. Growth-associated products (β = 0) are formed in proportion to growth, usually primary metabolites from energy metabolism — ethanol by yeast, lactic acid, gluconic acid; production stops when growth stops. Non-growth-associated products (α = 0) are formed at a rate proportional to biomass regardless of growth, typically secondary metabolites in the stationary phase — penicillin, many antibiotics, some pigments; production needs a long stationary phase or fed-batch at low growth rates. Mixed-growth-associated products (α, β ≠ 0) such as lactic acid in some strains and xanthan. The type determines the best reactor operation: batch or chemostat at high D for growth-associated, fed-batch or two-stage continuous systems for non-growth-associated products.
Describe the growth phases of a batch culture and the Monod model. (10 marks)
Show the model answer
Lag: cells adapt to the new medium (synthesising enzymes, repairing); length depends on inoculum age and size and medium change. Exponential (log) phase: balanced growth, dX/dt = μ_maxX, constant composition, doubling time ln 2/μ. Deceleration: substrate depletion or inhibitory products slow growth. Stationary: growth equals death or growth stops; secondary metabolites (antibiotics) form; cells use endogenous reserves. Death: viable cells decline exponentially (k_d). Monod (1949): empirical μ = μ_maxS/(K_s + S), analogous to Michaelis–Menten for the limiting substrate; at S ≫ K_s, μ ≈ μ_max (exponential phase); as S falls toward K_s growth slows (deceleration). Combined with yield, dS/dt = −(1/Y)dX/dt, it predicts the batch curve; extensions include inhibition, maintenance, multiple substrates and Contois kinetics. Parameters come from initial rates at several S or from chemostat data (S = K_sD/(μ_max − D)).
Bioreactors
Topics: Introduction; basic features and types of bioreactors.
Fermenter design and types
A bioreactor provides a controlled, sterile environment: temperature, pH, dissolved oxygen, mixing and feed. Standard stirred-tank fermenter: H/D ≈ 2–3 (taller than chemical reactors, for gas residence), dished heads, two or three Rushton or hydrofoil impellers (D_i ≈ D/3), four baffles, ring sparger, jacket and coils, mechanical seal, sterilisable sample and addition ports, exhaust filter and condenser, foam breaker, instrumentation (T, pH with acid/base dosing, DO, pressure, foam level, off-gas O₂/CO₂). Everything is designed for steam-in-place: no dead legs, polished stainless steel (316L), sloped bottoms and diaphragm valves.
Types: stirred tank (most versatile); bubble column (no moving parts, gentle, low cost); airlift (internal or external loop, defined circulation, low shear — single-cell protein, ICI pressure cycle fermenter); packed-bed and trickle-bed (immobilised cells and enzymes); fluidised bed; membrane and hollow-fibre reactors (cell retention, perfusion of mammalian cells); photobioreactors (tubular or flat panel, for algae); solid-state fermenters (tray, rotating drum, packed bed — koji, enzymes from fungi); single-use bag reactors (wave and stirred, for biopharma).
Modes: batch, fed-batch (substrate fed to avoid inhibition or overflow metabolism and to reach high cell density — baker’s yeast, penicillin, recombinant E. coli), continuous (chemostat, turbidostat) and perfusion. Scale-up criteria: constant P/V, constant k_La, constant tip speed (shear), constant mixing time — they cannot all be held, so scale-up chooses the limiting factor (usually k_La or P/V for microbial, shear for mammalian cells).
- H/D 2–3, multiple impellers, baffles, sparger.
- Stirred tank, bubble column, airlift, packed, membrane, photo, solid-state.
- Batch, fed-batch, continuous, perfusion.
- Scale-up: P/V, k_La, tip speed, mixing time.
Example: A 10 L fermenter (D_i = 0.07 m) runs at 600 rpm. Scale to 10 m³ at constant tip speed with geometric similarity. Find the impeller speed.
- Volume ratio 1000 ⇒ length ratio 10 ⇒ D_i = 0.7 m.
- Tip speed πND constant ⇒ N₂ = N₁D₁/D₂ = 600 × 0.07/0.7 = 60 rpm.
- Then P/V falls by 10 times — k_La will be much lower; scale-up at constant P/V would need N₂ = 600 × 10^(−2/3) = 129 rpm.
Answer: 60 rpm at constant tip speed (but check k_La).
Bioreactor functions: sterile controlled environment for T, pH, DO, mixing, feeding. Stirred-tank fermenter features: H/D 2–3, multiple impellers, baffles, sparger, jacket/coils, seals, sterile ports, exhaust filter, instrumentation, steam-in-place design. Types: stirred tank, bubble column, airlift, packed and trickle bed, fluidised bed, membrane/hollow fibre, photobioreactor, solid-state, single-use. Modes: batch, fed-batch, continuous, perfusion. Scale-up criteria: P/V, k_La, tip speed, mixing time.
- Airlift: low shear, no shaft seal.
- Fed-batch avoids overflow metabolism.
- Perfusion retains mammalian cells.
- Single-use bags avoid cleaning validation.
- Constant P/V: N ∝ D^(−2/3).
Key formulas
- P = N_pρN³D⁵
- tip speed = πND
- P/V constant ⇒ N₂ = N₁(D₁/D₂)^(2/3)
Practice questions
Airlift fermenters are favoured for
- high shear
- low shear and simple construction
- solid-state culture
- very viscous broths only
Show the answer
Answer: B. low shear and simple construction No impeller.
Fed-batch operation is used to
- avoid substrate inhibition and reach high cell density
- remove all feed
- sterilise
- cool
Show the answer
Answer: A. avoid substrate inhibition and reach high cell density Controlled feeding.
Mammalian cells are scaled up mainly limiting
- k_La
- shear (tip speed)
- temperature
- pH
Show the answer
Answer: B. shear (tip speed) Shear-sensitive.
Typical fermenter H/D is
- 0.5
- 2–3
- 10
- 1/3
Show the answer
Answer: B. 2–3 Longer gas path.
Solid-state fermentation is used for
- insulin
- koji and fungal enzymes
- mAbs
- activated sludge
Show the answer
Answer: B. koji and fungal enzymes Little free water.
Theory questions
Compare stirred-tank and airlift bioreactors. (5 marks)
Show the model answer
Stirred tank: mechanical agitation by impellers; high and controllable k_La and mixing; handles viscous and mycelial broths; versatile and well understood for scale-up; but high power consumption, shear damage to sensitive cells, shaft seals that are contamination risks, and complex construction. Airlift: no moving parts; mixing and circulation driven by gas sparged in the riser and density difference with the downcomer; low shear (good for plant and animal cells, some fungi), simple and cheaper construction, lower power per unit oxygen transferred, good heat transfer in loop designs; but lower k_La at high viscosity, less flexibility in mixing control, and needs tall vessels. Airlifts are used for single-cell protein, wastewater, and shear-sensitive cultures; stirred tanks for most antibiotic, enzyme and recombinant production.
Draw a stirred-tank fermenter and explain the function of its parts. (10 marks)
Show the model answer
Vessel: 316L stainless steel, polished, H/D ≈ 2–3, dished top and bottom, pressure-rated for steam sterilisation. Agitator: top or bottom drive, double mechanical seal, two to three impellers (Rushton turbines for gas dispersion, hydrofoils for bulk mixing) to mix, disperse air and suspend cells. Baffles (four, D/10) stop vortexing. Sparger (ring or open pipe) introduces filtered air below the lowest impeller. Jacket and/or internal coils with cooling water or steam for temperature control and sterilisation. Exhaust line with condenser and filter, foam sensor and mechanical foam breaker or antifoam dosing. Ports: inoculation, sampling (steam-sterilisable), acid/base and nutrient addition, harvest valve at the bottom. Instrumentation: temperature, pH, DO, pressure, level, off-gas analyser, flow meters, with controllers. Design rules for asepsis: no crevices or dead legs, welded joints, steam barriers on seals and valves, positive pressure. Sterilised in place with steam at 121 °C; cleaned in place with alkali and acid.
Downstream processing
Topics: Bioproduct recovery and bio-separations.
From broth to pure product
Fermentation broths are dilute (often 1–100 g/L), contain cells, debris and many impurities, and the products can be heat- and shear-sensitive. Downstream processing typically follows four stages (RIPP): Removal of insolubles (cell separation by centrifugation or filtration), Isolation (concentration and capture: extraction, adsorption, precipitation, ultrafiltration), Purification (chromatography, fractional precipitation), and Polishing (crystallisation, drying, sterile filtration, formulation). It can account for 50–80 % of production cost for biopharmaceuticals.
Cell removal: disc-stack centrifuges (yeast, bacteria), rotary vacuum filters with filter aid (mycelia), microfiltration (cross-flow). Intracellular products need cell disruption: high-pressure homogeniser (500–1000 bar; protein release follows first order in the number of passes, ln[R_m/(R_m − R)] = kNPᵃ), bead mills, enzymatic (lysozyme) or chemical lysis, then debris removal. Isolation: liquid–liquid extraction (penicillin into butyl acetate at pH 2–3, back-extraction at pH 7), aqueous two-phase systems (PEG–dextran, PEG–salt for proteins), precipitation (ammonium sulphate salting-out, isoelectric, organic solvents), adsorption on resins, ultrafiltration to concentrate proteins.
Purification: chromatography — ion exchange, hydrophobic interaction, affinity (protein A for antibodies), size exclusion — with resolution and capacity trade-offs. Polishing: crystallisation (penicillin salts, citric acid, insulin), drying (spray, freeze-drying for proteins and vaccines), sterile filtration (0.2 µm). Overall yield is the product of step yields, so fewer, more selective steps are best; purity is tracked by purification factors and specific activity.
- RIPP: removal, isolation, purification, polishing.
- Cell disruption for intracellular products.
- Extraction, ATPS, precipitation, UF.
- Chromatography, crystallisation, freeze-drying.
Example: A process has six steps with yields 95, 90, 85, 92, 80 and 90 %. Find overall recovery.
- Multiply: 0.95 × 0.90 × 0.85 × 0.92 × 0.80 × 0.90.
- = 0.481.
Answer: Only 48 % recovered: each step costs product.
Example: A homogeniser releases protein as ln[R_m/(R_m − R)] = kN with k = 0.4 per pass at 500 bar. How many passes for 90 % release?
- R/R_m = 0.9 ⇒ ln(1/0.1) = 2.303.
- N = 2.303/0.4 = 5.8 → 6 passes.
Answer: Six passes.
Downstream processing (often 50–80 % of cost): Removal of insolubles (centrifugation, filtration, MF), cell disruption for intracellular products (homogeniser, bead mill, enzymatic, chemical; ln[R_m/(R_m − R)] = kNPᵃ), Isolation (solvent extraction, aqueous two-phase systems, precipitation, adsorption, ultrafiltration), Purification (ion-exchange, hydrophobic, affinity, size-exclusion chromatography), Polishing (crystallisation, spray and freeze drying, sterile filtration). Overall yield = product of step yields; purification factor and specific activity track purity.
- Penicillin extracted at pH 2–3.
- PEG–dextran ATPS is gentle on proteins.
- Ammonium sulphate salts out proteins.
- Protein A captures antibodies.
- Freeze-drying preserves vaccines.
Key formulas
- overall yield = Πy_i
- ln[R_m/(R_m − R)] = kNPᵃ
- purification factor = specific activity out/in
Practice questions
The first step of downstream processing is usually
- crystallisation
- removal of cells and insolubles
- chromatography
- freeze-drying
Show the answer
Answer: B. removal of cells and insolubles RIPP.
A high-pressure homogeniser is used for
- drying
- cell disruption
- sterilisation
- crystallisation
Show the answer
Answer: B. cell disruption Releases intracellular products.
Penicillin is extracted into butyl acetate at
- pH 7
- pH 2–3
- pH 12
- any pH
Show the answer
Answer: B. pH 2–3 Un-ionised acid form.
Salting out of proteins commonly uses
- NaCl only
- ammonium sulphate
- sugar
- ethanol only
Show the answer
Answer: B. ammonium sulphate Highly soluble kosmotrope.
Overall yield of several steps is
- the sum of yields
- the product of yields
- the best yield
- the average
Show the answer
Answer: B. the product of yields Losses multiply.
Theory questions
Explain cell disruption methods for intracellular products. (5 marks)
Show the model answer
Mechanical: high-pressure homogeniser (Manton–Gaulin, 500–1000 bar; cells ruptured by shear and impact through a valve; protein release ln[R_m/(R_m − R)] = kNPᵃ; widely used for E. coli and yeast at large scale); bead mill (agitated glass beads grind cells; good for yeast and fungi); ultrasonication (cavitation; laboratory scale); freeze–thaw and freeze-pressing. Non-mechanical: chemical — alkali, detergents (Triton, SDS), solvents (toluene), chaotropes (urea, guanidine); enzymatic — lysozyme for Gram-positive bacteria, cellulases and glucanases for yeast and plant cells; osmotic shock for periplasmic proteins; heat treatment. Selection depends on cell wall strength, product sensitivity (heat, shear, denaturation), scale, cost and release of debris and nucleic acids that raise viscosity (nucleases added). Temperature control is needed because disruption generates heat.
Describe the stages of downstream processing with suitable unit operations for each. (10 marks)
Show the model answer
Removal of insolubles: separate cells or debris from broth — centrifugation (disc-stack for bacteria/yeast), filtration (rotary vacuum with precoat for fungal mycelia, plate-and-frame), cross-flow microfiltration, flocculation; for intracellular products, disruption by high-pressure homogeniser, bead mill, ultrasonication, enzymes (lysozyme), detergents or osmotic shock, then clarification. Isolation (product capture and concentration, volume reduction): solvent extraction (antibiotics), aqueous two-phase extraction (enzymes), precipitation (ammonium sulphate, pH, solvents, polyelectrolytes), adsorption on resins or carbon, ultrafiltration and evaporation. Purification (removing closely related impurities): chromatography — ion exchange, hydrophobic interaction, affinity, reversed phase, gel filtration; fractional precipitation; electrophoresis at small scale. Polishing: crystallisation, drying (spray, vacuum, freeze), sterile filtration, formulation and packaging. Criteria: product stability, scale, purity required (pharmaceutical > 99 %), cost, yield; minimise number of steps; validation for viral clearance and endotoxin removal in biopharma.
Notes, examples and questions were written for this studio; the prescribed books are listed in the studio for reference.
Frequently asked questions
What is the Biochemical Engineering Studio?
Enzymes, cells and bioreactors. Biomolecules, Michaelis–Menten kinetics with inhibition and deactivation, starch and cellulose hydrolysis, immobilised enzymes, media and sterilisation, oxygen transfer, Monod growth and chemostats, bioreactor types and downstream processing from the ASTU CHE1817PE31 syllabus (2018-19 scheme).
What can I do in the Biochemical Engineering Studio?
Enzyme kinetics and inhibition; Sterilisation and oxygen transfer; Cell growth, chemostats and bioreactors; Downstream processing.
Is the Biochemical Engineering Studio free?
Yes. It is free and runs in your browser with no sign-up.