Introduction
Topics: Differences between science and engineering (eye vs camera, bird flight vs aircraft); biology as an independent discipline; 18th-century observations leading to discoveries; Brownian motion (Robert Brown) and the origin of thermodynamics (Julius Mayer).
Science and engineering: the eye and the camera
Science asks how nature works and seeks general laws; engineering uses that knowledge, under limits of cost, safety and materials, to build something that does a job. Biology is full of solutions that engineers later reached by other routes, and comparing the two shows how differently they can meet the same need.
The eye and the camera both form a real, inverted image with a converging lens on a light-sensitive surface. The camera focuses by moving the lens; the eye changes the lens shape with the ciliary muscles (accommodation). The camera sets exposure with an aperture and a shutter; the eye uses the iris, which opens the pupil from about 2 to 8 mm, and the retina adapts chemically over minutes. A sensor has uniform pixels; the retina packs cone cells densely in the fovea for sharp colour vision and spreads rod cells outside it for dim light.
Nature’s design is self-building, self-repairing and runs on chemical energy, but it carries history: the vertebrate retina is wired “inside out”, leaving a blind spot where the optic nerve passes through. Engineering designs are simpler to analyse and can be optimised freely, but they do not grow or heal. Each can learn from the other, the basis of bio-inspired design.
- Science explains; engineering applies under constraints
- Both: converging lens, inverted real image
- Focus: lens moves (camera) vs lens changes shape (eye)
- Exposure: aperture and shutter vs iris and retinal adaptation
- Fovea (cones) for detail; rods for dim light; blind spot
Example: The eye’s effective focal length is about 17 mm. Estimate its optical power, and the f-number range as the pupil goes from 2 mm to 8 mm.
- Power ≈ 1/f = 1/0.017 m ≈ 59 dioptres.
- f-number = focal length/aperture: 17/8 ≈ f/2.1 in the dark, 17/2 = f/8.5 in bright light.
Answer: About 59 D; roughly f/2 to f/8.5
Example: A camera lens of 50 mm focal length has a 25 mm aperture. What is its f-number, and which part of the eye plays the aperture’s role?
- f-number = 50/25 = 2, written f/2.
- The iris sets the pupil diameter, as the aperture does in a camera.
Answer: f/2; the iris
Science and engineering: bird flight and aircraft
Birds and aircraft both fly by making lift with a wing: air flows faster over the curved upper surface and is turned downward, so the pressure below exceeds that above. Lift is L = ½ρv²SC_L, where ρ is air density, v the speed, S the wing area and C_L the lift coefficient, which rises with the angle of attack until the wing stalls.
The differences are instructive. A bird’s wing flaps to give both lift and thrust and changes shape continuously, with feathers that act as slots and flaps; an aircraft separates the jobs, using fixed wings for lift and engines for thrust, with movable flaps and slats for slow flight. Birds sense airflow through feathers and adjust instantly; aircraft rely on instruments and control systems.
Wing loading, weight per unit wing area, sets how fast a flyer must go to stay up: low wing loading (most birds) allows slow flight and tight turns, while airliners have wing loadings nearly a hundred times larger and need long runways. The Wright brothers studied birds and copied wing-warping for roll control, a direct case of biology guiding engineering.
- Lift L = ½ρv²SC_L
- Bird: flapping gives lift and thrust; shape changes
- Aircraft: fixed wings for lift, engines for thrust
- Wing loading = weight/wing area
- Minimum speed v = √(2mg/(ρSC_L))
Example: A 0.4 kg pigeon has 0.06 m² of wing with C_L about 1.0. Find its minimum flight speed (ρ = 1.225 kg/m³).
- Lift must equal weight: ½ρv²SC_L = mg.
- v = √(2 × 0.4 × 9.81/(1.225 × 0.06 × 1.0)) = √106.8.
Answer: About 10.3 m/s
Example: A 70 t airliner has 125 m² of wing and C_L = 1.5 with flaps. Find its minimum speed and compare wing loadings with the pigeon.
- v = √(2 × 70 000 × 9.81/(1.225 × 125 × 1.5)) = √5979 = 77.3 m/s.
- Wing loading: pigeon 0.4 × 9.81/0.06 = 65 N/m²; airliner 70 000 × 9.81/125 = 5494 N/m².
Answer: ≈ 77 m/s; about 84 times the pigeon’s wing loading
Biology as an independent discipline: key observations
For a long time the study of living things was part of medicine and natural history. It became an independent science when observers found patterns that applied to all life and could be tested: that living things are built of cells, that they can be classified by shared features, that species change over time, and that traits pass on by definite rules.
Instruments drove these discoveries. Hooke’s microscope revealed cells in cork in 1665, and Leeuwenhoek’s single-lens microscopes showed bacteria and protozoa. Eighteenth-century naturalists, above all Linnaeus, collected and named thousands of species, giving the two-part (binomial) names still used. Careful nineteenth-century work then produced the unifying theories: the cell theory, evolution, Mendelian inheritance and the germ theory.
Biology differs from physics in that its systems are the products of history (evolution), are extremely complex, and vary from one individual to another, so it relies heavily on comparison, statistics and experiment. Yet it rests on the same physical and chemical laws, which is why engineering tools (imaging, sensors, computation) now drive biological discovery.
- Cells: Hooke 1665; cell theory 1838–39
- Microbes: Leeuwenhoek; germ theory: Pasteur
- Classification and binomial names: Linnaeus 1735
- Evolution: Darwin 1859; inheritance: Mendel 1866
- Biology: historical, complex, variable; same physical laws
Example: A microscope has a 40× objective and a 10× eyepiece. What is its magnification, and what limits the finest detail it can show?
- Total magnification = 40 × 10 = 400×.
- Detail is limited by resolution, d = 0.61λ/NA; for green light (550 nm) and NA 1.25, d = 0.61 × 550/1.25 ≈ 268 nm.
Answer: 400×; about 0.27 µm resolution, so viruses cannot be seen
Example: State the cell theory and say why it was a turning point.
- All living things are made of one or more cells; the cell is the basic unit of structure and function; cells arise only from existing cells (Virchow, 1855).
- It gave one framework for plants, animals and microbes alike.
Answer: It unified all life under one structural unit
Brownian motion: Robert Brown’s observation
In 1827 the botanist Robert Brown watched tiny particles released from pollen grains suspended in water and saw them jiggle ceaselessly and irregularly. He first suspected a life force, but found the same motion in particles of dead matter, glass and minerals, so it was not biological. The cause stayed a puzzle for nearly 80 years.
In 1905 Einstein explained it: water molecules, invisible and in constant thermal motion, strike the particle from all sides, and at each instant the blows do not quite balance, so the particle performs a random walk. Its mean-square displacement grows in proportion to time, ⟨x²⟩ = 2Dt in one direction, with diffusion coefficient D = k_BT/(6πηr) for a sphere of radius r in a liquid of viscosity η.
Jean Perrin’s measurements of Brownian motion (1908) confirmed Einstein’s formula and gave a value for Avogadro’s number, convincing the last doubters that atoms are real. For biology, Brownian motion and diffusion explain how molecules move inside cells, why diffusion is fast over micrometres but hopelessly slow over centimetres, and why large organisms need circulatory systems.
- Brown 1827: pollen particles jiggle; dead matter too
- Cause: unbalanced molecular collisions
- ⟨x²⟩ = 2Dt (one dimension)
- D = k_BT/(6πηr)
- Perrin confirmed atoms; diffusion shapes cell size
Example: A particle of radius 0.5 µm is in water (η = 1.0 × 10⁻³ Pa·s) at 293 K. Find D and its rms displacement along x in 1 s.
- D = 1.381 × 10⁻²³ × 293/(6π × 10⁻³ × 0.5 × 10⁻⁶) = 4.29 × 10⁻¹³ m²/s.
- x_rms = √(2Dt) = √(8.58 × 10⁻¹³) = 9.3 × 10⁻⁷ m.
Answer: D ≈ 4.3 × 10⁻¹³ m²/s; about 0.93 µm in 1 s
Example: How far does the same particle wander in 100 s? What does this say about diffusion over long distances?
- x_rms ∝ √t, so 100 times the time gives 10 times the distance: about 9.3 µm.
- To go 10 times farther it needs 100 times as long.
Answer: About 9 µm: diffusion is useless over centimetres
Julius Mayer and the origin of thermodynamics
In 1840 Julius Robert Mayer, a German ship’s doctor in the tropics, noticed that the venous blood he drew from sailors was unusually bright red, almost like arterial blood. He reasoned that in a hot climate the body needs to burn less food to keep warm, so less oxygen is taken from the blood.
From this physiological observation he argued that the heat of the body and the work of the muscles both come from the chemical energy of food, and that heat and mechanical work are different forms of one conserved quantity. In 1842 he estimated the mechanical equivalent of heat from the difference between the specific heats of a gas at constant pressure and constant volume, before Joule’s more precise experiments. This was a first statement of the conservation of energy, the first law of thermodynamics.
Living things are therefore energy converters obeying the same laws as engines: food energy becomes work and heat, with muscles about 20–25 % efficient. Biology thus contributed directly to physics, an example used in this course of how observation of organisms led to general science.
- Mayer 1840: bright venous blood in the tropics
- Less fuel burnt to keep warm in hot climates
- Heat and work: forms of one conserved energy
- First law of thermodynamics
- Muscles ≈ 20–25 % efficient
Example: A person eats 2000 kcal a day. Find the energy in joules and the average power.
- E = 2000 × 4186 J = 8.37 × 10⁶ J.
- P = 8.37 × 10⁶/86 400 s = 96.9 W.
Answer: 8.4 MJ; about 97 W, like a bright bulb
Example: A 60 kg student climbs 10 m of stairs. If muscles are 25 % efficient, how much food energy is used?
- Work = mgh = 60 × 9.81 × 10 = 5886 J.
- Food energy = 5886/0.25 = 23 544 J = 5.6 kcal; the rest becomes heat.
Answer: About 23.5 kJ (5.6 kcal)
Science seeks to understand how nature works; engineering applies that understanding to design useful systems. Nature often inspires engineering (biomimicry): the camera copies the eye (lens ↔ lens, aperture ↔ iris, film/sensor ↔ retina), and aircraft borrow lift and control ideas from birds, though they use fixed wings and engines instead of flapping. Careful biological observation has driven physics: Robert Brown (1827) saw pollen particles jiggling in water — Brownian motion — later explained by Einstein as molecular collisions; Julius Mayer, a ship’s doctor, noticed that venous blood was redder in the tropics and reasoned that the body needs less oxidation to stay warm, leading him to the conservation of energy (first law of thermodynamics).
- Eye ↔ camera: cornea/lens focus, iris = aperture, retina = sensor, brain = processor; the eye focuses by changing lens shape (accommodation).
- Bird ↔ aircraft: aerofoil wings, tail for stability; birds flap and morph wings, aircraft use fixed wings and propulsion.
- Biology is complex, adaptive, self-repairing and self-replicating — unlike most engineered systems.
- Brownian motion confirmed the existence of atoms (Perrin’s experiments).
- Biomimicry examples: Velcro (burrs), bullet train nose (kingfisher), self-cleaning surfaces (lotus leaf).
Practice questions
The part of the eye that works like a camera’s aperture is the
- retina
- iris
- cornea
- optic nerve
Show the answer
Answer: B. iris Controls light entering.
Brownian motion was first observed by
- Einstein
- Robert Brown
- Mendel
- Darwin
Show the answer
Answer: B. Robert Brown 1827, pollen grains in water.
Julius Mayer’s observation of blood colour led to
- the cell theory
- conservation of energy
- Mendel’s laws
- DNA structure
Show the answer
Answer: B. conservation of energy First law of thermodynamics.
Velcro was inspired by
- bird feathers
- plant burrs
- fish scales
- spider silk
Show the answer
Answer: B. plant burrs Biomimicry.
Theory questions
How is science different from engineering? (2 marks)
Show the model answer
Science discovers and explains natural phenomena (why/how); engineering designs and builds systems to meet human needs using scientific knowledge under constraints of cost and safety.
Compare the human eye with a camera. (5 marks)
Show the model answer
Lens system (cornea + lens vs camera lens), aperture (iris/pupil vs diaphragm), detector (retina rods/cones vs film/sensor), focusing (accommodation by ciliary muscles vs moving the lens), processing (brain vs processor), protective covering (eyelid vs shutter/lens cap).
“Biological observations have led to major scientific discoveries.” Discuss with the examples of Brownian motion and the origin of thermodynamics. (10 marks)
Show the model answer
Brown observed random motion of pollen-released particles, ruled out life by repeating with inorganic dust; Einstein (1905) explained it by molecular bombardment, Perrin measured Avogadro’s number — proof of atoms. Mayer (1840) noticed bright red venous blood in sailors in the tropics: less oxygen consumed to keep warm; he reasoned heat and work are interconvertible forms of one conserved quantity, computing the mechanical equivalent of heat — the basis of the first law.
Classification of Organisms
Topics: Hierarchy of life forms; classification by cellularity, ultrastructure, energy and carbon utilisation, nitrogen excretion, habitat; five-kingdom classification; model organisms (E. coli, S. cerevisiae, D. melanogaster, C. elegans, A. thaliana, M. musculus).
The hierarchy of life and naming
Classification sorts the enormous variety of organisms into groups nested inside larger groups. The main ranks, from broadest to narrowest, are kingdom, phylum (division in plants), class, order, family, genus and species; a domain level above kingdom separates Bacteria, Archaea and Eukarya. Members of a lower rank share more features than members of a higher one.
A species is usually a group of organisms that can interbreed and produce fertile offspring. Every species gets a two-part Latin name (binomial nomenclature, introduced by Linnaeus): the genus name with a capital letter and the species name in lower case, printed in italics or underlined when handwritten, such as Homo sapiens or Rhinoceros unicornis, the one-horned rhinoceros of Kaziranga.
Living systems are also organised in a hierarchy of complexity: molecules, organelles, cells, tissues, organs, organ systems, organisms, populations, communities, ecosystems and the biosphere. New properties emerge at each level that are not present in the parts alone, which is why biology needs study at every scale.
- Domain, kingdom, phylum, class, order, family, genus, species
- Species: interbreeding, fertile offspring
- Binomial name: Genus species, italic
- Example: Rhinoceros unicornis (Kaziranga)
- Levels: molecule → cell → tissue → organ → organism → ecosystem
Example: Give the classification of humans from kingdom to species.
- Kingdom Animalia, phylum Chordata, class Mammalia, order Primates.
- Family Hominidae, genus Homo, species sapiens.
Answer: Animalia → Chordata → Mammalia → Primates → Hominidae → Homo → Homo sapiens
Example: Correct the writing of the name “Panthera Tigris” for the tiger.
- The genus starts with a capital, the species with a small letter.
- Both are printed in italics.
Answer: Panthera tigris (in italics)
Bases of classification: cells, energy, carbon, nitrogen and habitat
Organisms can be grouped by cellularity (unicellular, like bacteria and amoeba, or multicellular) and by ultrastructure. Prokaryotes (bacteria and archaea) lack a nucleus and membrane-bound organelles, are usually 1–10 µm across, and have 70S ribosomes. Eukaryotes have a nucleus, mitochondria, an endoplasmic reticulum and, in plants, chloroplasts; they are usually 10–100 µm and have 80S ribosomes.
By energy source organisms are phototrophs (using light) or chemotrophs (using chemical reactions); by carbon source they are autotrophs (fixing CO₂) or heterotrophs (using organic carbon). Plants and cyanobacteria are photoautotrophs, animals and fungi chemoheterotrophs, and some bacteria are chemoautotrophs that live on reactions such as oxidising ammonia or sulphide.
By the form in which they excrete nitrogen, animals are ammonotelic (ammonia, toxic but very soluble, used by most fish living in plenty of water), ureotelic (urea, used by mammals and amphibians) or uricotelic (uric acid, nearly insoluble, used by birds, reptiles and insects to save water). By habitat they may be aquatic or terrestrial, and tolerant of extremes such as heat, salt or acidity (extremophiles).
- Prokaryote: no nucleus, 70S ribosomes, 1–10 µm
- Eukaryote: nucleus and organelles, 80S, 10–100 µm
- Photo- or chemotroph; auto- or heterotroph
- Ammonotelic, ureotelic, uricotelic
- Habitat: aquatic, terrestrial, extremophiles
Example: Classify E. coli and a mango tree by cell type, energy and carbon source.
- E. coli: prokaryote; gets energy and carbon from organic compounds: chemoheterotroph.
- Mango: eukaryote; uses light and fixes CO₂: photoautotroph.
Answer: E. coli: prokaryotic chemoheterotroph; mango: eukaryotic photoautotroph
Example: Compare the surface-to-volume ratio of a 1 µm bacterium and a 20 µm eukaryotic cell (treat both as cubes). Why does it matter?
- S/V = 6/side: 6 µm⁻¹ for the bacterium, 0.3 µm⁻¹ for the eukaryote.
- The bacterium has 20 times more surface per volume for taking in food and getting rid of waste.
Answer: 20 times higher; large cells need internal transport and organelles
Example: Why do birds excrete uric acid while fish excrete ammonia?
- Ammonia is toxic and must be diluted with lots of water, which fish have.
- Uric acid is almost insoluble and can be passed as a paste, saving water and suiting eggs with shells.
Answer: Water availability decides the nitrogen waste
Five-kingdom classification
R. H. Whittaker proposed five kingdoms in 1969, using cell structure, body organisation, mode of nutrition and evolutionary relationships. Monera are all prokaryotes (bacteria and cyanobacteria). Protista are unicellular eukaryotes (amoeba, paramecium, euglena, diatoms).
Fungi are eukaryotic heterotrophs that absorb food after digesting it outside the body, with cell walls of chitin (yeasts, moulds, mushrooms). Plantae are multicellular photosynthetic eukaryotes with cellulose walls. Animalia are multicellular heterotrophs without cell walls that ingest food.
The scheme has known limits: Monera lumps bacteria and archaea, which molecular studies show are as different from each other as from eukaryotes, and Protista is a mixed bag. The three-domain system (Woese, 1990), based on ribosomal RNA, is therefore used alongside it. Viruses fit none of the kingdoms, since they are not cells and reproduce only inside host cells.
- Monera: prokaryotes
- Protista: unicellular eukaryotes
- Fungi: absorptive heterotrophs, chitin walls
- Plantae: photosynthetic, cellulose walls
- Animalia: ingesting heterotrophs, no cell walls; viruses outside the scheme
Example: Place each in a kingdom: mushroom, amoeba, cyanobacterium, fern, sponge.
- Mushroom: Fungi. Amoeba: Protista.
- Cyanobacterium: Monera. Fern: Plantae. Sponge: Animalia.
Answer: Fungi, Protista, Monera, Plantae, Animalia
Example: Why are fungi not placed in Plantae, though both have cell walls and do not move?
- Fungi cannot photosynthesise; they absorb organic food.
- Their walls are chitin, not cellulose, and they store glycogen, not starch.
Answer: Different nutrition, wall material and food store
Model organisms
A model organism is a species studied in depth because it is easy to grow, reproduces quickly, has a small and well-mapped genome, and can be genetically modified, so that findings can be applied to other species, including humans. Because all life shares a common origin, basic processes such as DNA copying, the cell cycle and metabolism are much the same across species.
Escherichia coli revealed the genetic code and gene regulation and is the workhorse of recombinant DNA technology. Saccharomyces cerevisiae (baker’s yeast), a simple eukaryote, taught much of the cell cycle and ageing. Caenorhabditis elegans, a transparent worm of exactly 959 body cells in the adult hermaphrodite, allowed every cell division and the whole nervous system to be traced.
Drosophila melanogaster gave the chromosome theory of inheritance and the genes that lay out the body plan. Arabidopsis thaliana, a small weed with a tiny genome, is the plant model for flowering, light responses and stress. Mus musculus, the house mouse, is the main mammalian model for human disease, immunity and drug testing, with knockout mice lacking single genes.
- Easy to grow, fast generations, small genome, genetic tools
- E. coli: genetic code, cloning
- Yeast: cell cycle; C. elegans: 959 cells, nervous system
- Drosophila: chromosomes, body plan genes
- Arabidopsis: plants; mouse: human disease models
Example: E. coli divides every 20 minutes. How many cells come from one cell in 8 hours of unlimited growth?
- 8 h = 480 min = 24 doublings.
- Cells = 2²⁴.
Answer: About 1.7 × 10⁷ (16.8 million)
Example: Why is yeast often used to study human genes rather than E. coli?
- Yeast is a eukaryote, with a nucleus, organelles and a cell cycle like ours.
- Many human genes can replace their yeast counterparts and work; bacteria lack these systems.
Answer: It shares eukaryotic cell machinery with us
Living things are organised in a hierarchy (molecules → cells → tissues → organs → organisms → populations → ecosystems) and classified to make their diversity understandable. Classification can be by cellularity (unicellular/multicellular), ultrastructure (prokaryotes without a nucleus vs eukaryotes with membrane-bound organelles), energy and carbon source (autotrophs, heterotrophs, lithotrophs), nitrogen excretion (ammonotelic, ureotelic, uricotelic) and habitat (aquatic, terrestrial). Whittaker’s five kingdoms are Monera, Protista, Fungi, Plantae and Animalia. Model organisms are easy to grow and genetically well understood, so discoveries in them generalise.
- Taxonomic ranks: kingdom, phylum, class, order, family, genus, species (binomial nomenclature, e.g. Homo sapiens).
- Prokaryote: no nucleus, 70S ribosomes (bacteria); eukaryote: nucleus, mitochondria, 80S ribosomes.
- Autotrophs make food (photo- or chemo-); heterotrophs consume; lithotrophs use inorganic electron donors.
- Ammonotelic (fish), ureotelic (mammals), uricotelic (birds, reptiles) — related to water availability.
- Model organisms: E. coli (bacterium), S. cerevisiae (yeast), D. melanogaster (fruit fly), C. elegans (nematode), A. thaliana (plant), M. musculus (mouse).
Practice questions
Prokaryotes lack
- ribosomes
- a cell membrane
- a membrane-bound nucleus
- DNA
Show the answer
Answer: C. a membrane-bound nucleus Nucleoid region instead.
Birds excrete nitrogen mainly as
- ammonia
- urea
- uric acid
- nitrate
Show the answer
Answer: C. uric acid Uricotelic — conserves water.
The five-kingdom system was proposed by
- Linnaeus
- Whittaker
- Darwin
- Mendel
Show the answer
Answer: B. Whittaker R. H. Whittaker, 1969.
Which is a model organism for genetics of development?
- Drosophila melanogaster
- Tiger
- Mango
- Whale
Show the answer
Answer: A. Drosophila melanogaster Fruit fly.
Theory questions
What are autotrophs and heterotrophs? (2 marks)
Show the model answer
Autotrophs synthesise their own organic food from inorganic substances using light or chemical energy; heterotrophs obtain organic food from other organisms.
Compare prokaryotic and eukaryotic cells. (5 marks)
Show the model answer
Nucleus absent vs present; membrane organelles absent vs present; 70S vs 80S ribosomes; circular DNA vs linear chromosomes; size 1–10 µm vs 10–100 µm; cell division by binary fission vs mitosis/meiosis; examples bacteria vs plants, animals, fungi.
Explain the bases of classification of organisms and the five-kingdom system. Why are model organisms used? (10 marks)
Show the model answer
Bases: cellularity, ultrastructure, energy/carbon source, excretion, habitat, molecular taxonomy. Five kingdoms with characteristics: Monera (prokaryotes), Protista (unicellular eukaryotes), Fungi (absorptive heterotrophs, chitin walls), Plantae (photosynthetic, cellulose walls), Animalia (ingestive heterotrophs, no walls). Model organisms: short life cycles, easy culture, known genomes, genetic tools; conserved biology lets findings transfer to humans.
Genetics
Topics: Mendel’s laws: dominance and recessiveness, segregation and independent assortment; epistasis; single-gene disorders in humans such as cystic fibrosis.
Mendel’s experiments: dominance and recessiveness
Gregor Mendel (1856–1863) crossed garden peas that differed in single clear traits (round or wrinkled seed, tall or dwarf plant) and counted thousands of offspring. He used pure-breeding parents, controlled pollination, and followed generations, which turned heredity into a quantitative science.
Each trait is controlled by a gene with alternative forms (alleles). An organism carries two alleles for each gene, one from each parent. When both are the same the organism is homozygous (TT or tt); when different, heterozygous (Tt). The dominant allele (T) shows its effect even in the heterozygote; the recessive (t) shows only when homozygous. The genetic make-up is the genotype; the visible trait is the phenotype.
Crossing pure tall (TT) with pure dwarf (tt) gives an F₁ that is all tall (Tt). Selfing the F₁ gives an F₂ with a 3 : 1 phenotype ratio and a 1 : 2 : 1 genotype ratio (TT : Tt : tt). A test cross with the recessive homozygote reveals an unknown genotype: if any recessive offspring appear, the parent was heterozygous.
- Gene and alleles; two alleles per individual
- Homozygous vs heterozygous
- Dominant shows in Tt; recessive only in tt
- Monohybrid F₂: 3 : 1 phenotypes, 1 : 2 : 1 genotypes
- Test cross with tt reveals the genotype
Example: Cross Tt × Tt. Give the genotype and phenotype ratios.
- Gametes: T or t from each parent, each with probability ½.
- Punnett square: TT, Tt, Tt, tt.
- Tall (TT or Tt) : dwarf (tt) = 3 : 1.
Answer: Genotypes 1 : 2 : 1; phenotypes 3 tall : 1 dwarf
Example: A tall plant crossed with a dwarf gives 52 tall and 48 dwarf offspring. What was the tall parent’s genotype?
- A 1 : 1 ratio appears when Tt is crossed with tt.
- A TT parent would give all tall offspring.
Answer: Tt (heterozygous)
Segregation and independent assortment
Mendel’s first law, the law of segregation, says the two alleles of a gene separate during gamete formation, so each gamete carries just one, and they combine at random at fertilisation. Meiosis explains it: homologous chromosomes, carrying the two alleles, go to different gametes.
His second law, independent assortment, says alleles of different genes go into gametes independently of each other. A dihybrid RrYy (round and yellow seeds) forms four gamete types, RY, Ry, rY and ry, in equal numbers, and crossing two such plants gives sixteen equally likely combinations and a 9 : 3 : 3 : 1 ratio of phenotypes.
The law holds for genes on different chromosomes (or far apart on one). Genes close together on the same chromosome tend to be inherited together (linkage), and crossing over during meiosis recombines them at a rate that grows with their distance, which is how the first genetic maps were made. Probability rules (multiply for independent events, add for alternatives) solve most crosses quickly.
- Segregation: one allele per gamete
- Independent assortment for unlinked genes
- RrYy: four gamete types, 2ⁿ for n heterozygous genes
- Dihybrid F₂: 9 : 3 : 3 : 1
- Linked genes break the rule; crossing over recombines
Example: In RrYy × RrYy, what fraction of offspring are wrinkled and green (rryy)?
- P(rr) = ¼ and P(yy) = ¼, independently.
- P(rryy) = ¼ × ¼.
Answer: 1/16
Example: How many kinds of gametes does AaBbCc make, and what is the chance that AaBbCc × AaBbCc gives aabbcc?
- Each heterozygous gene doubles the gamete types: 2³ = 8.
- P(aa) × P(bb) × P(cc) = (¼)³.
Answer: 8 gamete types; 1/64
Epistasis: genes that mask other genes
Epistasis is an interaction in which one gene masks or changes the effect of another, non-allelic gene. It modifies the 9 : 3 : 3 : 1 ratio of a dihybrid cross, although the 16 combinations still occur: only their phenotypes are grouped differently. It reflects the fact that genes act in pathways, where a block at an early step hides what later steps would do.
In recessive epistasis (9 : 3 : 4) a homozygous recessive at one gene hides the other: in Labrador dogs, B (black) is dominant to b (brown), but ee prevents pigment being deposited in the hair, so ee dogs are yellow whatever their B gene. In dominant epistasis (12 : 3 : 1), a dominant allele at one gene masks the other, as for fruit colour in summer squash.
Other patterns include complementary genes (9 : 7), where both dominant alleles are needed for a trait, as for purple flowers in sweet pea, and duplicate genes (15 : 1), where either dominant allele is enough, as for seed-capsule shape in shepherd’s purse. Recognising which ratio fits the data tells which kind of interaction is at work.
- One gene masks another (non-allelic) gene
- Recessive epistasis 9 : 3 : 4 (Labrador colour)
- Dominant epistasis 12 : 3 : 1 (squash colour)
- Complementary 9 : 7 (sweet pea)
- Duplicate 15 : 1 (shepherd’s purse)
Example: Two black Labradors, both BbEe, have many puppies. What ratio of colours is expected?
- B_E_ (9/16) black; bbE_ (3/16) brown.
- All ee (4/16) are yellow regardless of B.
Answer: 9 black : 3 brown : 4 yellow
Example: A cross of two white-flowered sweet peas gives an F₁ of all purple; the F₂ has 181 purple and 139 white. Explain.
- 181 : 139 is close to 9 : 7 (180 : 140 of 320).
- Purple needs at least one dominant allele of both genes (C_P_); each white parent lacked a different one.
Answer: Complementary genes, 9 : 7
Single-gene disorders in humans
Some diseases are caused by a change in a single gene and follow Mendel’s rules. In autosomal recessive disorders, such as cystic fibrosis, sickle-cell anaemia and thalassaemia, an affected person has two faulty copies; carriers with one copy are healthy. Two carrier parents have a 1 in 4 chance, at each pregnancy, of an affected child.
Cystic fibrosis is caused by mutations in the CFTR gene, which makes a chloride-ion channel in the membranes of lung, gut and sweat-gland cells. Without a working channel, mucus becomes thick and sticky, blocking airways and pancreatic ducts and leading to infections and poor digestion. The commonest mutation, ΔF508, deletes one amino acid so that the protein folds wrongly and is destroyed. A high salt level in sweat is a classic test.
Autosomal dominant disorders (Huntington’s disease, achondroplasia) need only one faulty copy, so an affected parent has a 1 in 2 chance of passing it on. X-linked recessive disorders (haemophilia, colour blindness, Duchenne muscular dystrophy) mostly affect males, who have one X. Genetic counselling, carrier testing and newborn screening use these rules; the Hardy–Weinberg law, p² + 2pq + q² = 1, estimates carrier frequencies from disease frequency.
- Autosomal recessive: two copies; carriers healthy; 1/4 risk from two carriers
- Cystic fibrosis: CFTR chloride channel; thick mucus; ΔF508
- Autosomal dominant: one copy; 1/2 risk
- X-linked recessive: mostly males (haemophilia)
- Hardy–Weinberg: p² + 2pq + q² = 1
Example: Two healthy carriers of cystic fibrosis plan a family. What are the chances for each child? If a child is healthy, what is the chance it is a carrier?
- Cc × Cc gives CC : Cc : cc = 1 : 2 : 1, so 1/4 affected.
- Among healthy children (CC or Cc), carriers are 2 of 3.
Answer: 1/4 affected; 2/3 of healthy children are carriers
Example: A recessive disease affects 1 in 2500 births. Estimate the carrier frequency.
- q² = 1/2500 ⇒ q = 0.02, p = 0.98.
- Carriers 2pq = 2 × 0.98 × 0.02 = 0.039.
Answer: About 1 in 25 people
Example: A woman who carries haemophilia marries a healthy man. What are the risks for their sons and daughters?
- Mother XᴴXʰ, father XᴴY.
- Sons get the mother’s X: half XʰY (affected). Daughters get the father’s Xᴴ: none affected, half carriers.
Answer: Half the sons affected; half the daughters carriers
Genes come in alternative forms (alleles). Mendel crossed pea plants and found that one allele can mask another (dominance), that the two alleles of a gene separate into different gametes (law of segregation, monohybrid ratio 3 : 1), and that genes for different traits assort independently (dihybrid ratio 9 : 3 : 3 : 1). Epistasis occurs when one gene masks the effect of another, changing these ratios (e.g. 9 : 3 : 4). Single-gene disorders such as cystic fibrosis (recessive mutation in the CFTR gene) follow Mendelian inheritance: two carrier parents have a 1 in 4 chance of an affected child.
- Genotype (allele combination, e.g. Tt) vs phenotype (observable trait, e.g. tall).
- Monohybrid F₂: phenotype 3 : 1, genotype 1 : 2 : 1.
- Dihybrid F₂: 9 : 3 : 3 : 1.
- Test cross with the homozygous recessive reveals an unknown genotype (1 : 1 if heterozygous).
- Epistasis ratios: recessive 9 : 3 : 4, dominant 12 : 3 : 1, duplicate 15 : 1.
- Cystic fibrosis: autosomal recessive, thick mucus in lungs and pancreas; carriers are healthy.
Key formulas
- Monohybrid F₂ = 3 : 1
- Dihybrid F₂ = 9 : 3 : 3 : 1
- P(affected | both carriers) = 1/4
Practice questions
The F₂ phenotypic ratio of a monohybrid cross is
- 1 : 1
- 3 : 1
- 9 : 3 : 3 : 1
- 1 : 2 : 1
Show the answer
Answer: B. 3 : 1 Dominant : recessive.
Independent assortment applies to
- alleles of one gene
- genes on different chromosomes
- mitochondrial genes
- sex only
Show the answer
Answer: B. genes on different chromosomes Unlinked genes.
Cystic fibrosis is inherited as an
- autosomal dominant trait
- autosomal recessive trait
- X-linked dominant trait
- acquired disease
Show the answer
Answer: B. autosomal recessive trait Two copies of the faulty CFTR allele.
A 9 : 3 : 4 ratio indicates
- complete dominance
- recessive epistasis
- codominance
- linkage
Show the answer
Answer: B. recessive epistasis One gene masks another.
Theory questions
State the law of segregation. (2 marks)
Show the model answer
The two alleles of a gene separate during gamete formation so each gamete carries only one allele.
Explain a dihybrid cross with a Punnett square and derive 9 : 3 : 3 : 1. (6 marks)
Show the model answer
RRYY × rryy → F₁ RrYy (round yellow). F₁ gametes RY, Ry, rY, ry in equal proportions; 16 combinations: 9 R_Y_ (round yellow), 3 R_yy (round green), 3 rrY_ (wrinkled yellow), 1 rryy (wrinkled green).
Explain Mendel’s laws, epistasis and the inheritance of cystic fibrosis with pedigree reasoning. (10 marks)
Show the model answer
Dominance, segregation, independent assortment with examples; epistasis (e.g. coat colour in mice 9 : 3 : 4, gene C needed for any pigment). CF: CFTR chloride channel mutation (ΔF508); autosomal recessive; carrier parents Cc × Cc → 1 CC : 2 Cc : 1 cc → 25% affected, 50% carriers; affected children can have unaffected parents; males and females equally affected.
Biomolecules
Topics: Molecules of life: sugars, starch, cellulose, amino acids and proteins, nucleotides and DNA/RNA, lipids.
Sugars, starch and cellulose
Carbohydrates have the general formula (CH₂O)ₙ. Monosaccharides are single sugar units, such as glucose and fructose (C₆H₁₂O₆, six carbons) and ribose (five carbons, in RNA). In water glucose forms a ring, in two forms, α and β, that differ in the position of the OH group on carbon 1. Disaccharides join two units by a glycosidic bond with loss of water: sucrose (glucose + fructose), lactose and maltose.
Polysaccharides are long chains. Starch, the plant food store, is α(1→4)-linked glucose: amylose is unbranched and coils into a helix, while amylopectin branches through α(1→6) links. Glycogen, the animal store in liver and muscle, is like amylopectin but more branched, so it can be broken down quickly at many ends.
Cellulose, the main material of plant cell walls and the most abundant organic compound on Earth, is β(1→4)-linked glucose. The β link makes straight chains that lie side by side and hydrogen-bond into strong fibres (cotton, wood, paper). Human enzymes cannot break β links, so cellulose is dietary fibre for us, while cattle rely on gut microbes to digest it. Chitin, in insect skeletons and fungal walls, is a similar polymer of an amino sugar.
- Monosaccharides: glucose, fructose, ribose
- Glycosidic bond formed with loss of water
- Starch α(1→4) (amylose, amylopectin); glycogen highly branched
- Cellulose β(1→4): straight, strong fibres; indigestible to humans
- Chitin: amino-sugar polymer
Example: A starch molecule has 10 000 glucose units. Estimate its molar mass.
- Each glucose (180.16) loses one water (18.02) on joining: 162.14 g/mol per unit.
- M ≈ 10 000 × 162.14.
Answer: ≈ 1.6 × 10⁶ g/mol
Example: Starch and cellulose are both chains of glucose. Why can we digest one but not the other?
- Starch has α(1→4) links, which our amylase enzymes recognise.
- Cellulose has β(1→4) links; no human enzyme fits them.
Answer: The α versus β linkage
Amino acids and proteins
Proteins are built from 20 kinds of amino acids, each with an amino group, a carboxyl group, a hydrogen and a side chain (R group) on a central carbon. The side chains differ in size, charge and attraction to water, and these differences give proteins their variety. Nine amino acids are essential: the body cannot make them, so they must come from food.
Amino acids join by peptide bonds (–CO–NH–), formed with loss of water, into polypeptide chains. A protein has four levels of structure: primary (the sequence), secondary (local α-helices and β-sheets held by hydrogen bonds), tertiary (the overall 3D fold, held by hydrophobic interactions, hydrogen bonds, ionic bonds and disulphide bridges) and quaternary (several chains together).
Proteins do most of the work of the cell: enzymes catalyse reactions, haemoglobin carries oxygen, antibodies defend, collagen and keratin give strength, actin and myosin move muscle, and insulin signals. Heat, extreme pH or some chemicals unfold (denature) proteins and destroy their function, which is why cooking sets egg white and high fever is dangerous.
- 20 amino acids; 9 essential
- Peptide bond –CO–NH– (condensation)
- Primary, secondary, tertiary, quaternary structure
- Functions: enzymes, transport, defence, structure, motion, signals
- Denaturation by heat, pH, chemicals
Example: A protein has 150 amino acids in one chain. How many peptide bonds does it have, and what is its approximate mass?
- n amino acids in a chain are joined by n − 1 bonds: 149.
- Average residue mass is about 110 Da: 150 × 110 = 16 500 Da.
Answer: 149 bonds; about 16.5 kDa
Example: How many different peptides five amino acids long are possible?
- Each of the five positions can be any of 20 amino acids.
- 20⁵ = 3 200 000.
Answer: 3.2 million
Nucleotides, DNA and RNA
Nucleotides have three parts: a five-carbon sugar (deoxyribose in DNA, ribose in RNA), a phosphate group, and a nitrogenous base. The bases are purines (adenine A and guanine G, two rings) and pyrimidines (cytosine C, thymine T in DNA, uracil U in RNA, one ring). Nucleotides join through sugar–phosphate bonds into a backbone with a 5′ and a 3′ end.
DNA, as shown by Watson and Crick in 1953 using Rosalind Franklin’s X-ray data, is a double helix of two antiparallel strands with the bases inside, paired A with T (two hydrogen bonds) and G with C (three). So the amount of A equals T and G equals C (Chargaff’s rules), and each strand fixes the sequence of the other, which is how DNA is copied. One turn of the helix is about 10 base pairs and 3.4 nm long.
RNA is usually single-stranded and has several jobs: messenger RNA carries a gene’s code to the ribosome, transfer RNA brings amino acids, and ribosomal RNA forms the core of the ribosome and catalyses peptide-bond formation. Nucleotides also serve as energy carriers (ATP) and signals (cAMP).
- Nucleotide = sugar + phosphate + base
- Purines A, G; pyrimidines C, T (DNA), U (RNA)
- Double helix, antiparallel; A–T (2 H-bonds), G–C (3)
- Chargaff: A = T, G = C; 0.34 nm per base pair
- mRNA, tRNA, rRNA; ATP as energy currency
Example: A DNA sample has 30 % adenine. Find the other bases.
- T = A = 30 %.
- G + C = 40 %, and G = C, so each is 20 %.
Answer: T 30 %, G 20 %, C 20 %
Example: The human haploid genome has 3.2 × 10⁹ base pairs. How long is it if stretched out?
- Length = 3.2 × 10⁹ × 0.34 nm = 1.09 m.
- A diploid cell has two sets: about 2.2 m.
Answer: About 1.1 m per set; 2.2 m per cell
Example: Write the complementary strand of 5′-ATGCGT-3′.
- Pair A–T and G–C: 3′-TACGCA-5′.
- Written 5′ to 3′: 5′-ACGCAT-3′.
Answer: 5′-ACGCAT-3′
Lipids
Lipids are a varied group defined by being insoluble in water but soluble in organic solvents. Fats and oils are triglycerides: glycerol joined by ester bonds to three fatty acids. Saturated fatty acids have no C=C double bonds, pack tightly and are solid at room temperature (butter, ghee); unsaturated ones have kinked chains that pack loosely and are liquid (mustard and sunflower oils).
Phospholipids have two fatty-acid tails and a phosphate-containing head. The head attracts water and the tails avoid it, so in water they form a bilayer about 5 nm thick, with heads facing outwards: this is the basic structure of every cell membrane, in which proteins float (the fluid-mosaic model). Steroids such as cholesterol (which stiffens membranes) and the sex hormones are lipids built on four fused rings.
Lipids store energy compactly, about 9 kcal (38 kJ) per gram against about 4 kcal for carbohydrate or protein, insulate the body, cushion organs, and make waxes that waterproof leaves and feathers. Industrially, plant oils are hydrogenated to make solid fats and are converted to biodiesel by transesterification.
- Insoluble in water; triglyceride = glycerol + 3 fatty acids
- Saturated (solid) vs unsaturated (liquid, kinked)
- Phospholipid bilayer ≈ 5 nm: cell membranes
- Steroids: cholesterol, hormones
- Energy ≈ 9 kcal/g; biodiesel from oils
Example: Compare the energy in 10 g of fat and 10 g of sugar.
- Fat: 10 × 9 = 90 kcal = 377 kJ.
- Sugar: 10 × 4 = 40 kcal = 167 kJ.
Answer: Fat gives about 2.25 times as much
Example: Why does ghee set solid in winter while mustard oil stays liquid?
- Ghee is rich in saturated fatty acids, whose straight chains pack tightly.
- Mustard oil is mostly unsaturated; its kinked chains cannot pack, so its melting point is low.
Answer: Saturated chains pack; unsaturated ones do not
Life is built from a few kinds of molecules. Carbohydrates (glucose, sucrose, starch, cellulose, glycogen) give energy and structure; starch and glycogen are α-glucose polymers for storage, cellulose a β-glucose polymer for plant cell walls. Proteins are chains of 20 amino acids joined by peptide bonds and fold into specific 3D shapes that determine function (enzymes, antibodies, structure). Nucleotides (sugar + phosphate + base) form DNA and RNA. Lipids (fats, phospholipids, steroids) store energy and form membranes.
- Monosaccharides (glucose, fructose), disaccharides (sucrose, lactose, maltose), polysaccharides (starch, glycogen, cellulose).
- Amino acid: central carbon with –NH₂, –COOH, H and side chain R; peptide bond –CO–NH–.
- Protein structure levels: primary (sequence), secondary (α-helix, β-sheet), tertiary (3D fold), quaternary (subunits, e.g. haemoglobin).
- DNA: deoxyribose, bases A, T, G, C, double helix with A=T (2 H-bonds) and G≡C (3 H-bonds); RNA: ribose, uracil instead of thymine, single-stranded.
- Lipids: triglycerides (glycerol + 3 fatty acids), phospholipids (bilayers), steroids (cholesterol, hormones).
Key formulas
- Chargaff: A = T, G = C
- n amino acids → n − 1 peptide bonds (water lost)
Practice questions
Cellulose is a polymer of
- α-glucose
- β-glucose
- fructose
- amino acids
Show the answer
Answer: B. β-glucose β(1→4) linkages.
The bond joining amino acids is the
- glycosidic bond
- peptide bond
- ester bond
- hydrogen bond
Show the answer
Answer: B. peptide bond Amide link.
RNA contains the base
- thymine
- uracil
- both
- neither
Show the answer
Answer: B. uracil U replaces T.
If a DNA sample has 30% adenine, its guanine content is
- 30%
- 20%
- 40%
- 70%
Show the answer
Answer: B. 20% A = T = 30%, so G + C = 40%, G = 20%.
Theory questions
Differentiate DNA and RNA. (3 marks)
Show the model answer
Sugar deoxyribose vs ribose; bases ATGC vs AUGC; double vs mostly single strand; genetic storage vs protein synthesis roles (mRNA, tRNA, rRNA); more stable vs less stable.
Describe the levels of protein structure. (5 marks)
Show the model answer
Primary: amino-acid sequence (peptide bonds). Secondary: local α-helix and β-pleated sheet stabilised by H-bonds. Tertiary: overall 3D fold via disulphide bonds, ionic, hydrophobic and H-bond interactions. Quaternary: assembly of polypeptide subunits (haemoglobin α₂β₂).
Write notes on carbohydrates, proteins, nucleic acids and lipids as molecules of life. (10 marks)
Show the model answer
Structure, examples and functions of each class (as above): energy (glucose, starch, glycogen), structure (cellulose, chitin), enzymes/transport/defence (proteins), heredity (DNA, RNA), membranes, energy storage and hormones (lipids).
Enzymes
Topics: Biological catalysts, enzyme classification, mechanism of action, enzyme kinetics, Michaelis–Menten equation.
Enzymes as biological catalysts
Enzymes are biological catalysts, almost all proteins (a few are RNA, called ribozymes). Like any catalyst they speed up a reaction without being used up and without changing its equilibrium; they do it by lowering the activation energy. They are remarkable for their speed (often millions of times faster than the uncatalysed reaction), their specificity for one substrate and one reaction, and their working under mild conditions.
Many enzymes need a non-protein helper. A cofactor may be a metal ion (Zn²⁺ in carbonic anhydrase, Mg²⁺ for enzymes using ATP) or an organic coenzyme, often made from a vitamin (NAD⁺ from niacin, coenzyme A from pantothenic acid). The protein part alone is the apoenzyme, and with its cofactor the holoenzyme.
Enzyme activity depends on temperature (rising to an optimum, about 37 °C in humans, then falling sharply as the protein denatures), pH (pepsin in the stomach works best near pH 2, trypsin in the intestine near pH 8), substrate and enzyme concentration, and the presence of activators or inhibitors. Industry uses enzymes in detergents, food processing, textiles, biofuels and diagnostics.
- Mostly proteins; ribozymes are RNA
- Lower activation energy; equilibrium unchanged
- Fast, specific, mild conditions
- Cofactors: metal ions or coenzymes (vitamins)
- Optimum temperature and pH; denaturation
Example: An enzyme lowers the activation energy by 50 kJ/mol at 310 K. By what factor does the rate rise (same Arrhenius factor)?
- Ratio = e^(ΔEₐ/RT) = e^(50 000/(8.314 × 310)).
- = e^19.4.
Answer: About 2.7 × 10⁸ times faster
Example: Why does a stomach enzyme stop working when food passes into the small intestine?
- Pepsin’s optimum is near pH 2.
- The intestine is about pH 8, which changes charges on pepsin’s side chains so its active site no longer fits.
Answer: Wrong pH alters its shape and charge
Classification of enzymes
The International Union of Biochemistry classifies enzymes by the reaction they catalyse into six main classes, each enzyme getting a four-part EC number such as EC 3.2.1.1 for α-amylase. Names usually end in “-ase” and describe the substrate and the reaction, as in lactate dehydrogenase. (A seventh class, translocases, which move ions across membranes, was added in 2018.)
Oxidoreductases (1) transfer electrons or hydrogen: dehydrogenases, oxidases, catalase. Transferases (2) move a group such as phosphate or amino from one molecule to another: kinases, transaminases. Hydrolases (3) split bonds by adding water: amylase, lipase, proteases such as pepsin and trypsin, and nucleases.
Lyases (4) break or form bonds without water or oxidation, often making double bonds: aldolase, decarboxylases, carbonic anhydrase. Isomerases (5) rearrange atoms within one molecule: phosphoglucose isomerase, mutases. Ligases (6) join two molecules, driven by ATP: DNA ligase, which seals DNA strands in cloning, and synthetases.
- 1 Oxidoreductases (dehydrogenases, catalase)
- 2 Transferases (kinases)
- 3 Hydrolases (amylase, lipase, proteases)
- 4 Lyases (aldolase, decarboxylases)
- 5 Isomerases; 6 Ligases (DNA ligase)
Example: Classify: alcohol dehydrogenase, hexokinase, lipase.
- Alcohol dehydrogenase removes hydrogen from ethanol: oxidoreductase (1).
- Hexokinase transfers phosphate from ATP to glucose: transferase (2).
- Lipase splits fats with water: hydrolase (3).
Answer: 1, 2 and 3
Example: Classify: aldolase, phosphoglucose isomerase, DNA ligase.
- Aldolase splits fructose-1,6-bisphosphate without water: lyase (4).
- Phosphoglucose isomerase turns glucose-6-phosphate into fructose-6-phosphate: isomerase (5).
- DNA ligase joins DNA ends using ATP: ligase (6).
Answer: 4, 5 and 6
Mechanism of action and inhibition
A substrate binds to a small pocket on the enzyme, the active site, forming an enzyme–substrate complex (ES). Fischer’s lock-and-key model (1894) pictured a rigid site that fits only the right substrate. Koshland’s induced-fit model (1958) is more accurate: binding changes the enzyme’s shape so that it grips the substrate more closely and strains the bonds to be broken.
In the active site the enzyme lowers the barrier by holding reactants close and correctly oriented, stabilising the transition state, providing acidic or basic groups that donate or accept protons, and sometimes forming a temporary covalent bond. The products then leave, and the enzyme is free for another cycle: E + S ⇌ ES → E + P.
Inhibitors reduce activity. A competitive inhibitor resembles the substrate and competes for the active site; it raises the apparent K_m but leaves V_max unchanged, and enough substrate overcomes it (malonate against succinate dehydrogenase; many drugs). A non-competitive inhibitor binds elsewhere and lowers V_max without changing K_m. Irreversible inhibitors bind permanently (nerve gases on acetylcholinesterase, aspirin on cyclo-oxygenase). Cells also regulate enzymes by allosteric control and feedback inhibition.
- Active site; ES complex; E + S ⇌ ES → E + P
- Lock and key vs induced fit
- Orientation, transition-state stabilisation, acid–base help
- Competitive: K_m up, V_max same
- Non-competitive: V_max down, K_m same; irreversible inhibitors
Example: An inhibitor’s effect disappears when much more substrate is added. What kind is it, and how does it change K_m and V_max?
- Excess substrate outcompetes it, so it binds the active site: competitive.
- Apparent K_m rises; V_max is unchanged.
Answer: Competitive: K_m up, V_max same
Example: Why does aspirin keep working for days after one dose against blood platelets?
- Aspirin acetylates cyclo-oxygenase permanently: an irreversible inhibitor.
- Platelets have no nucleus to make new enzyme, so the effect lasts their lifetime.
Answer: Irreversible inhibition in cells that cannot replace the enzyme
Enzyme kinetics: the Michaelis–Menten equation
When an enzyme’s substrate concentration is raised, the reaction rate first rises almost in proportion and then levels off as all the enzyme molecules become busy (saturation). Michaelis and Menten (1913), assuming E + S ⇌ ES → E + P, derived v = V_max[S]/(K_m + [S]), where V_max is the rate at saturation.
K_m, the Michaelis constant, is the substrate concentration at which the rate is half of V_max. A small K_m means the enzyme works well even at low substrate levels (high apparent affinity). The turnover number k_cat = V_max/[E]ₜ counts substrate molecules converted per enzyme per second, and k_cat/K_m measures overall efficiency; the best enzymes approach 10⁸–10⁹ M⁻¹s⁻¹, limited only by diffusion.
Because the curve is hard to read accurately, the equation is often inverted into the Lineweaver–Burk form 1/v = (K_m/V_max)(1/[S]) + 1/V_max, a straight line whose y-intercept is 1/V_max and slope K_m/V_max. It shows the type of inhibition at a glance: competitive inhibitors change the slope but not the y-intercept; non-competitive ones change the y-intercept.
- v = V_max[S]/(K_m + [S])
- K_m = [S] at half V_max
- k_cat = V_max/[E]ₜ; efficiency k_cat/K_m
- Lineweaver–Burk: 1/v = (K_m/V_max)(1/[S]) + 1/V_max
- Competitive inhibitor: K_m′ = K_m(1 + [I]/Kᵢ)
Example: An enzyme has V_max = 10 µM/s and K_m = 2 mM. Find v at [S] = 2 mM and 8 mM.
- At 2 mM: v = 10 × 2/(2 + 2) = 5 µM/s (half V_max, as expected at K_m).
- At 8 mM: v = 10 × 8/(2 + 8) = 8 µM/s.
Answer: 5 and 8 µM/s
Example: A Lineweaver–Burk plot has y-intercept 0.1 s/µM and slope 0.2 (in s·mM/µM). Find V_max and K_m.
- 1/V_max = 0.1 ⇒ V_max = 10 µM/s.
- K_m/V_max = 0.2 ⇒ K_m = 2 mM.
Answer: V_max = 10 µM/s, K_m = 2 mM
Example: A competitive inhibitor at [I] = Kᵢ is added to the same enzyme. Find v at [S] = 2 mM.
- K_m′ = 2(1 + 1) = 4 mM; V_max unchanged.
- v = 10 × 2/(4 + 2) = 3.33 µM/s.
Answer: 3.33 µM/s instead of 5
Example: If V_max = 10 µM/s with 0.01 µM of enzyme, find k_cat and k_cat/K_m (K_m = 2 mM).
- k_cat = 10/0.01 = 1000 s⁻¹.
- k_cat/K_m = 1000/(2 × 10⁻³ M) = 5 × 10⁵ M⁻¹s⁻¹.
Answer: 1000 s⁻¹; 5 × 10⁵ M⁻¹s⁻¹
Enzymes are protein catalysts that speed reactions enormously by lowering activation energy, without being consumed. They are highly specific because the substrate fits the active site (lock-and-key, refined to induced fit). Enzymes are classified into six classes by the reaction catalysed (oxidoreductases, transferases, hydrolases, lyases, isomerases, ligases). The rate follows Michaelis–Menten kinetics v = V_max[S]/(K_m + [S]): first order at low [S], saturating at V_max at high [S]; K_m is the substrate concentration giving half the maximum rate.
- EC classes: 1 oxidoreductases, 2 transferases, 3 hydrolases, 4 lyases, 5 isomerases, 6 ligases.
- Factors: temperature (optimum ~37 °C, denaturation above), pH (pepsin ~2, trypsin ~8), substrate and enzyme concentration, inhibitors.
- Low K_m = high affinity.
- Lineweaver–Burk: 1/v = (K_m/V_max)(1/[S]) + 1/V_max (straight line).
- Competitive inhibitors raise apparent K_m; non-competitive lower V_max.
Key formulas
- v = V_max[S]/(K_m + [S])
- 1/v = (K_m/V_max)(1/[S]) + 1/V_max
- v = V_max/2 when [S] = K_m
Practice questions
K_m is the substrate concentration at which the rate is
- zero
- V_max
- V_max/2
- 2V_max
Show the answer
Answer: C. V_max/2 Definition of K_m.
Enzymes that break bonds by adding water are
- ligases
- hydrolases
- isomerases
- transferases
Show the answer
Answer: B. hydrolases Class 3.
At very high substrate concentration the rate is
- first order
- zero order (≈ V_max)
- second order
- negative
Show the answer
Answer: B. zero order (≈ V_max) Enzyme saturated.
Enzymes speed reactions by
- raising activation energy
- lowering activation energy
- changing equilibrium constant
- being consumed
Show the answer
Answer: B. lowering activation energy Catalysis.
Theory questions
What is the active site of an enzyme? (2 marks)
Show the model answer
The region of the enzyme where the substrate binds and the reaction takes place; its shape and chemistry give specificity.
If V_max = 100 µmol/min and K_m = 5 mM, find the rate at [S] = 5 mM and 20 mM. (4 marks)
Show the model answer
v = 100 × 5/(5 + 5) = 50 µmol/min; v = 100 × 20/25 = 80 µmol/min.
Derive the Michaelis–Menten equation and explain the significance of K_m and V_max. (10 marks)
Show the model answer
E + S ⇌ ES → E + P (k₁, k₋₁, k₂). Steady state for ES: k₁[E][S] = (k₋₁ + k₂)[ES]; [E] = [E]₀ − [ES] ⇒ [ES] = [E]₀[S]/(K_m + [S]), K_m = (k₋₁ + k₂)/k₁. v = k₂[ES] = V_max[S]/(K_m + [S]) with V_max = k₂[E]₀. K_m measures affinity (low = tight binding) and equals [S] at half V_max; V_max reflects turnover (k_cat = V_max/[E]₀).
Information Transfer
Topics: DNA as genetic material; organisation of genetic material; genetic code, its universality and degeneracy; DICOM image formats; recombinant DNA technology and applications; regulation (DNA technology regulation bill, 2019).
DNA as the genetic material
Until the 1940s most scientists thought genes were proteins, because proteins are varied and DNA seemed too simple. Griffith (1928) found that harmless rough pneumococci became deadly smooth ones when mixed with heat-killed smooth bacteria: some “transforming principle” passed between them.
Avery, MacLeod and McCarty (1944) purified the transforming principle and showed it was destroyed by DNase but not by proteases or RNase: it was DNA. Hershey and Chase (1952) labelled bacteriophage DNA with radioactive phosphorus and protein with radioactive sulphur; only the phosphorus entered the bacteria and appeared in new phages, so DNA carried the instructions.
Meselson and Stahl (1958) grew bacteria in heavy nitrogen (¹⁵N) and then in light (¹⁴N). After one generation all DNA was of hybrid density, and after two, half hybrid and half light, proving semi-conservative replication: each new double helix keeps one old strand. Some viruses (influenza, HIV, coronaviruses) use RNA as their genetic material.
- Griffith 1928: transformation
- Avery et al. 1944: transforming principle is DNA
- Hershey–Chase 1952: phage DNA (³²P) enters cells
- Meselson–Stahl 1958: semi-conservative replication
- RNA genomes in some viruses
Example: In Hershey and Chase’s experiment, where would the radioactivity be found if genes were protein?
- Protein was labelled with ³⁵S.
- If protein carried genes, ³⁵S would enter the bacteria and pass to new phages; instead it stayed outside in the empty coats.
Answer: Inside the bacteria, which is not what was seen
Example: In the Meselson–Stahl experiment, what fraction of DNA is hybrid after three generations in ¹⁴N?
- The two original ¹⁵N strands persist, each in one hybrid molecule.
- After 3 generations there are 2³ = 8 molecules, 2 of them hybrid.
Answer: 1/4 hybrid, 3/4 light
Organisation of the genetic material
In prokaryotes the DNA is a single circular chromosome folded in a region called the nucleoid, often with small extra circles, plasmids, that carry genes such as antibiotic resistance. In eukaryotes the DNA is split among linear chromosomes inside the nucleus (46 in a human body cell), with small extra genomes in mitochondria and chloroplasts.
Eukaryotic DNA is wrapped round positively charged proteins called histones. About 147 base pairs wind 1.7 times round a core of eight histones to form a nucleosome; with the linker DNA between them the repeat is about 200 base pairs. Nucleosomes coil into thicker fibres and loops, compacting the DNA enormously. Loosely packed euchromatin contains active genes; tightly packed heterochromatin is mostly silent.
A gene is a stretch of DNA that codes for a protein or a functional RNA. Eukaryotic genes contain coding exons separated by non-coding introns, which are cut out of the RNA before translation. Only about 1–2 % of the human genome codes for protein; much of the rest regulates genes, forms chromosome structures such as centromeres and telomeres, or consists of repeated sequences.
- Prokaryote: circular chromosome in the nucleoid; plasmids
- Eukaryote: linear chromosomes in a nucleus; 46 in humans
- Nucleosome: 147 bp on 8 histones; ~200 bp repeat
- Euchromatin (active) vs heterochromatin (silent)
- Exons and introns; ~1–2 % codes for protein
Example: About 2 m of DNA fits in a nucleus about 6 µm across. What length ratio does this need?
- Ratio = 2 m/6 × 10⁻⁶ m ≈ 3.3 × 10⁵.
- Scaled up, 30 km of thread would have to fit in a 9 cm ball.
Answer: About 3 × 10⁵: like 30 km of thread in a tennis ball
Example: Estimate the number of nucleosomes in one human haploid genome (3.2 × 10⁹ bp, ~200 bp per repeat).
- Each nucleosome plus linker uses about 200 bp.
- Number ≈ 3.2 × 10⁹/200 = 1.6 × 10⁷.
Answer: About 1.6 × 10⁷ nucleosomes
The genetic code: universality and degeneracy
Genetic information flows from DNA to RNA (transcription) and from RNA to protein (translation): the central dogma. The code is read in triplets called codons, starting from a fixed point and without gaps or overlaps. With four bases there are 4³ = 64 codons: 61 specify amino acids and 3 (UAA, UAG, UGA) are stop signals. AUG codes for methionine and also marks the start.
The code is degenerate: most amino acids have more than one codon (leucine, serine and arginine have six each; only methionine and tryptophan have one). Synonymous codons usually differ in the third base, so many mutations there change nothing in the protein (silent mutations). It is unambiguous: each codon means only one amino acid.
The code is nearly universal: the same codons mean the same amino acids in bacteria, plants and humans, which is strong evidence for a common origin of life and is what lets a human gene be read correctly by bacteria in biotechnology. Small variations exist, for example in mitochondria, where UGA codes for tryptophan instead of stop.
- Triplet codons, read without gaps or overlaps
- 64 codons: 61 sense, 3 stop; AUG = Met and start
- Degenerate: several codons per amino acid
- Unambiguous; third-base changes often silent
- Nearly universal (mitochondria differ slightly)
Example: Translate the mRNA 5′-AUG GCU UGG AAA UAA-3′.
- AUG = Met (start), GCU = Ala, UGG = Trp, AAA = Lys.
- UAA = stop: translation ends.
Answer: Met–Ala–Trp–Lys
Example: A mutation changes GCU to GCC. What happens to the protein?
- GCU and GCC both code for alanine: the code is degenerate in the third base.
- The amino acid, and so the protein, is unchanged.
Answer: Nothing: a silent mutation
Example: How many mRNA nucleotides code for a 300-amino-acid protein, counting the stop codon?
- 300 codons × 3 = 900 nucleotides.
- Plus 3 for the stop codon.
Answer: 903 (plus untranslated ends)
DICOM: medical image formats
DICOM (Digital Imaging and Communications in Medicine) is the international standard for storing and exchanging medical images such as CT, MRI, X-ray, ultrasound and PET. It defines both a file format and a network protocol, so that scanners, storage servers (PACS) and viewing stations from different makers can work together.
A DICOM file combines a header and the pixel data. The header is a list of data elements, each identified by a tag of two hexadecimal numbers (group, element), a value representation (its data type) and a value. Tags record the patient (name, ID, age), the study and series, the modality, the scanner settings, slice position and thickness, and the image size and bit depth. Medical images often use 12 or 16 bits per pixel, far more grey levels than an ordinary 8-bit photograph, so that fine density differences can be windowed for viewing.
Because the header carries personal data, files must be anonymised (de-identified) before they are shared for research or teaching. Ordinary formats such as JPEG or PNG lose the header and usually the bit depth, so they are fine for display but not for diagnosis. Images can be compressed losslessly within DICOM, and 3D volumes are built from stacks of slices for reconstruction and printing.
- Standard file format and network protocol (PACS)
- Header of tagged elements (group, element) + pixel data
- Patient, study, modality, geometry, bit depth
- 12–16 bits per pixel; windowing
- Anonymise before sharing; JPEG loses data
Example: A CT slice is 512 × 512 pixels at 16 bits. How big is its pixel data, and a 300-slice scan?
- 512 × 512 × 2 bytes = 524 288 bytes = 512 KiB per slice.
- 300 slices × 512 KiB = 153 600 KiB = 150 MiB.
Answer: 512 KiB per slice; about 150 MiB in all
Example: A student wants to post a CT image of a relative online for a class project. What should be done first?
- Remove or blank identifying tags such as (0010,0010) name, (0010,0020) ID and birth date, and any burnt-in text.
- Get consent; share a de-identified copy only.
Answer: Anonymise the header (and image text) and obtain consent
Recombinant DNA technology and its applications
Recombinant DNA technology joins DNA from different sources and puts it into a host that copies and expresses it. Restriction enzymes cut DNA at specific short sequences (EcoRI cuts GAATTC), often leaving sticky ends; DNA ligase seals pieces together; and vectors such as plasmids or viruses carry the DNA into host cells such as E. coli or yeast. Selection markers (often antibiotic resistance) pick out the cells that took up the vector.
The polymerase chain reaction (PCR) copies a chosen stretch of DNA millions of times by repeated cycles of heating to separate the strands, cooling so that primers bind, and extension by a heat-stable DNA polymerase. Each cycle doubles the amount, so 30 cycles give about a billion copies. It is used for diagnosis (including COVID-19 tests), forensics and research.
Applications include human insulin and growth hormone made by bacteria (since the 1980s), hepatitis B vaccine made by yeast, genetically modified crops such as Bt cotton (approved in India in 2002) that resist insect pests, gene therapy for inherited diseases, DNA fingerprinting, and genome editing with CRISPR–Cas9, which cuts DNA at a site chosen by a guide RNA. Each raises safety and ethical questions that regulators weigh.
- Restriction enzyme (EcoRI: GAATTC), ligase, vector, host
- Selection by marker genes
- PCR: denature, anneal, extend; 2ⁿ copies
- Insulin, vaccines, Bt cotton, gene therapy, forensics
- CRISPR–Cas9 genome editing
Example: In random DNA, how often would a 6-base site such as GAATTC occur? How many EcoRI fragments would you expect from the 48 502 bp of phage λ DNA?
- Probability = (1/4)⁶ = 1/4096, so about once per 4 kb.
- 48 502/4096 ≈ 11.8 sites expected.
- In fact λ has 5 EcoRI sites (6 fragments): real DNA is not random.
Answer: About one site per 4096 bp; ~12 expected, 5 actual
Example: Starting from one DNA molecule, how many copies does PCR make after 30 cycles (ideal)?
- Each cycle doubles the number.
- 2³⁰ = 1 073 741 824.
Answer: About 10⁹ copies
Regulation of DNA technology
DNA profiling identifies a person from short repeated sequences (STRs) that vary greatly between individuals. It is powerful in criminal investigation, identifying disaster victims, finding missing persons and settling parentage, but a DNA profile also reveals family links and potentially health information, so its use must be controlled.
In India the DNA Technology (Use and Application) Regulation Bill, 2019 proposed a DNA Regulatory Board to set standards and accredit laboratories, and national and regional DNA data banks with separate indices for crime scenes, suspects or undertrials, offenders, missing persons and unknown deceased persons. It required written consent for collecting DNA except for serious offences, and set penalties for unauthorised disclosure. The bill drew debate over privacy and the retention of profiles of people not convicted, and it was withdrawn from Parliament in 2023, so check the current position before relying on it.
Other rules govern genetic engineering itself: in India, the Genetic Engineering Appraisal Committee (GEAC) under the environment ministry approves genetically modified organisms for release, and institutional biosafety committees oversee laboratory work, while internationally the Cartagena Protocol on Biosafety covers movement of living modified organisms. Engineers working with biological data must also follow data-protection law.
- DNA profiling with STRs: forensics, missing persons, parentage
- 2019 Bill: Regulatory Board, data banks, indices
- Consent, privacy and penalties for misuse
- Bill withdrawn in 2023; check the current position
- GEAC approves GMOs; Cartagena Protocol
Example: Name three proposed functions of the DNA Regulatory Board under the 2019 bill.
- Accredit DNA laboratories and set quality standards.
- Advise on setting up DNA data banks, and lay down procedures for collecting, storing and destroying samples and profiles while protecting privacy.
Answer: Accreditation, standards, and privacy-protecting procedures
Example: Why is keeping DNA profiles of people never convicted controversial?
- A profile identifies the person and their relatives for life.
- Storing it without conviction or consent risks misuse and treats innocent people like offenders.
Answer: It intrudes on privacy and family privacy without justification
Experiments by Griffith, Avery–MacLeod–McCarty and Hershey–Chase proved that DNA, not protein, carries hereditary information. DNA is packaged with histones into nucleosomes and chromosomes. The central dogma states DNA → RNA (transcription) → protein (translation). The genetic code reads mRNA in non-overlapping triplets (codons): 64 codons specify 20 amino acids and stop signals; it is nearly universal and degenerate (several codons per amino acid). Recombinant DNA technology cuts DNA with restriction enzymes, joins genes into vectors with ligase and expresses them in hosts — producing insulin, vaccines and GM crops. Medical images (CT, MRI) are stored and shared in the DICOM format.
- Hershey–Chase: ³²P-labelled phage DNA entered bacteria; ³⁵S-labelled protein did not.
- Codons: AUG start (methionine), UAA, UAG, UGA stop; 61 sense codons.
- Degeneracy: e.g. leucine has 6 codons; wobble at the third base.
- Recombinant DNA tools: restriction endonucleases (EcoRI), DNA ligase, plasmid vectors, PCR, host cells (E. coli).
- Applications: human insulin, hepatitis B vaccine, Bt cotton, gene therapy, DNA fingerprinting.
- DICOM: standard for storing and transmitting medical images with patient metadata.
Key formulas
- Codons = 4³ = 64
- DNA → mRNA → protein
Practice questions
The number of possible codons is
- 20
- 61
- 64
- 16
Show the answer
Answer: C. 64 4 bases taken 3 at a time.
The start codon is
- UAA
- AUG
- UGA
- GGG
Show the answer
Answer: B. AUG Codes for methionine.
Restriction enzymes
- join DNA
- cut DNA at specific sequences
- copy RNA
- make proteins
Show the answer
Answer: B. cut DNA at specific sequences Molecular scissors.
The Hershey–Chase experiment proved that the genetic material is
- protein
- DNA
- lipid
- RNA in all organisms
Show the answer
Answer: B. DNA Phage DNA entered bacteria.
Theory questions
What is meant by degeneracy of the genetic code? (2 marks)
Show the model answer
Most amino acids are specified by more than one codon (e.g. glycine GGU, GGC, GGA, GGG).
Explain the steps of recombinant DNA technology. (6 marks)
Show the model answer
Isolate gene of interest; cut it and a plasmid vector with the same restriction enzyme; join with DNA ligase to form recombinant DNA; introduce into host (transformation); select transformed cells (antibiotic resistance marker); grow and express the protein; purify product (e.g. insulin).
Describe the evidence that DNA is the genetic material and the features of the genetic code, with applications of recombinant DNA technology. (10 marks)
Show the model answer
Griffith transformation; Avery–MacLeod–McCarty (DNase destroyed transforming principle); Hershey–Chase radiolabelling. Code: triplet, non-overlapping, commaless, universal (with minor exceptions in mitochondria), degenerate, start/stop codons. Applications: insulin, growth hormone, vaccines, Bt crops, diagnostics, gene therapy, forensic fingerprinting; need for regulation and ethics.